Jump to content

Ford Guys - Locker Question


afterburner82

Recommended Posts

Got a question for you Ford boys. I have a Locker that I wanted to verify the bearing size on. It is stamped with a part number 70882. Was wondering if anyone knew of the top of their head what size the bearings were in this thing? 2.89/3.062 or 3.25"? Can post a picture if necessary. Thanks!!!
Link to comment
Share on other sites

He's saying it's your case (the part the dif goes into) that dictates which size bearing you need, not the diff itself. A factory case can be either of the 2 sizes depending on what it's out of.

Gotcha. One final question: If the case determines what bearing size you need, then the diff/locker should work with any bearing size, correct? When I bought my Truetrac, all I supplied to the rep at Eaton was my center section and size (Ford 9") and # of splines (31). He never asked what bearing size I had which is why I am confused (Doesn't take much, I know...).

 

Thanks for the help everyone!!!

Link to comment
Share on other sites

OK...measure what exactly? The external cone bearings are no way close to anything 2.89" so I am guessing those aren't it. Is it something internal like around the blue spring inside the locker? You can't see what I am talking about from the preview of the picture, but you can once you click on the picture and look through the 2 inner holes. Thanks!!!

 

http://img242.imageshack.us/img242/1664/lockervw2.th.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...