Jump to content

'86 Crx Si race car FW


rb26deet32
 Share

Recommended Posts

Car is a 86 crx. From the doors forward it's all tube frame with a one piece fiber glass front clip. The car is comletely stripped. Only a fash which doesn't NEED to be in there and a plastic racing seat. The car weighs right around 1,400lbs with an empty tank.

 

The engine is a d16a1 from an early 90's integra. DOHC non Vtec. Had an oem rebuild done about three years ago now. Car hasnt ran for probably two years or so. Used to run gsxr 600 itbs and a 50 shot at the track. I was in the process of boosting it. Had everything but the oil return lines but then I started parting it out because I needed money. Now I'm missing a few more parts. Needs another 14b, t25 or 16g turbo. Needs an oil return line and oil pan needs tapped. The car also needs a Obd0-Obd1 conversion harness. Needs an intake mani and exhaust mani gaskets and a battery. I had one but it was in my civic and my civic was stolen... :(

 

Car has 225 slicks on the front and some crappy ass tires on the back. Has full adjustable suspension for sweet ass launches. 6 puck clutch (cable trans)

 

Now for what I already have. I have the hf manifold with adaptor plate for a t25, 14b or 16g turbo, dsm 450cc injectors (dont need a resistor box), two engine harnesses, two ecu's. I forget the codes now but I can find out if need be. One is for the crx, one for a integra. The integra one is chipped running uberdata. I also have a dsm smic, three intake manifolds and I think that's about it. Oh yea one thing. It's YELLOW

 

The car ran a 13 flat back in the day with the 50 shot. So it was basically making 130-140whp if that with small drag radials. Now it has 225 slicks and I was hoping to get at least 200whp with the 14b turbo. Well I think thats about it. If I remember anything else I'll post it.

 

I'm looking to get $800 OBO. I also will part out the drivetrain/shell if both are sold at once. Here are some pictures.

 

 

http://i35.photobucket.com/albums/d153/rb26deet32/crx5.jpg

http://i35.photobucket.com/albums/d153/rb26deet32/seat.jpg

http://i35.photobucket.com/albums/d153/rb26deet32/crx3.jpg

http://i35.photobucket.com/albums/d153/rb26deet32/crx2.jpg

http://i35.photobucket.com/albums/d153/rb26deet32/CopyofPicture1-1.jpg

http://i35.photobucket.com/albums/d153/rb26deet32/CopyofPicture3-1.jpg

http://i35.photobucket.com/albums/d153/rb26deet32/CopyofPicture7-2.jpg

Link to comment
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Guest Removed
I'm interested in the shell. Shoot me your number in a PM.

didnt see d16....i was thinking b18 :(

 

im hoping to have a 95 teg here soon :D built me another 13sec daily

Link to comment
Share on other sites

Just a heads up not trying to thread jack but a D16a1 is from a 87-89 Integra, very similar to that of a DOHC ZC. Good luck on your sale man. That thing is super light and you can put a B series swap in these and have a monster of a car haha

 

Yep. Basically same engine but its rated at like 7 less hp. Not sure why lol.

 

Another thing is if anyone wants to buy just the shell my friend will by the motor. I'm just too lazy to take the motor out and I don't feel like getting an engine hoist, though I really wouldn't need one.

Link to comment
Share on other sites

Yep. Basically same engine but its rated at like 7 less hp. Not sure why lol.

 

Another thing is if anyone wants to buy just the shell my friend will by the motor. I'm just too lazy to take the motor out and I don't feel like getting an engine hoist, though I really wouldn't need one.

 

How much for just the shell?

Link to comment
Share on other sites

How much for just the shell?

 

 

If someone buys the motor too the shelll will be $300.

 

If sold seperate

Engine=$400

Shell=$400

 

If both are sold

Engine=$300

Shell=$300

 

If that doesnt make sense let me know.

 

I just dont want to sell half of the car and then get stuck with the rest of it.

 

Thanks

Link to comment
Share on other sites

Guest Removed

95 integra 4 door, auto trans, just got it running. i need to find some better tires for it.

 

it has new radiator, water pump, timing belt, valve cover gasket. newer c/v shafts. still haven't looked over the brakes yet, but it stops. fixxed the passenger door regulator.

 

has has minor front end damage, but nothing i couldn't live with.

these pics where taken the night i bought it.

http://i5.photobucket.com/albums/y196/gearhead559/the%20teg/100_2856.jpg

http://i5.photobucket.com/albums/y196/gearhead559/the%20teg/100_2855.jpg

 

is yours titleable? sorry didnt read the whole deal.

Link to comment
Share on other sites

Yep, have the title with me. I never got it transfered because I wasn't going to be making it street legal.

 

95 integra 4 door, auto trans, just got it running. i need to find some better tires for it.

 

it has new radiator, water pump, timing belt, valve cover gasket. newer c/v shafts. still haven't looked over the brakes yet, but it stops. fixxed the passenger door regulator.

 

has has minor front end damage, but nothing i couldn't live with.

these pics where taken the night i bought it.

http://i5.photobucket.com/albums/y196/gearhead559/the%20teg/100_2856.jpg

http://i5.photobucket.com/albums/y196/gearhead559/the%20teg/100_2855.jpg

 

is yours titleable? sorry didnt read the whole deal.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

Bump. I'd rather have money than a car that I don't drive. Some one buy my little yellow car :D

 

Even if you don't want to drive it. At least you'll be able to say you have a yellow car ;)

 

And new price is $600 for everything thing I have for the car. That includes the turbo stuff that I still have.

 

Bumpage

Link to comment
Share on other sites

im interested and tryin to get the money!!

 

Good stuff. Right now there is only two people remotely interested so no rush. It's just too damn cold and I don't have the time or money to finish the car :(

 

Just want to add. This car has no rust on it at all. So if you wanted to put it back to stock it'd be a great starting point.

 

Brent

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share


×
×
  • Create New...