Radio Flyer1647545514 Posted April 19, 2010 Report Share Posted April 19, 2010 Since my tune I've been using 93 octane and it seems that every time I start to go on my first little pull of a ride my F1 light will pop on. I turn off the bike and start it back up and it never shows up again. Any input on why this is happening? Quote Link to comment Share on other sites More sharing options...
fas1k Posted April 20, 2010 Report Share Posted April 20, 2010 It is an FI light not F1. What kind of bike is it? Usually you use a jumper wire in a plug under the seat to retrieve the trouble codes, most common is something to do with the exhaust servo motor Quote Link to comment Share on other sites More sharing options...
Radio Flyer1647545514 Posted April 20, 2010 Author Report Share Posted April 20, 2010 I realized that FI part after I made the thread... I'll have to check the code I guess. I was shown how to do it earlier and nothing showed... I'll get to it again. Quote Link to comment Share on other sites More sharing options...
slowbusa Posted April 20, 2010 Report Share Posted April 20, 2010 u have to check it with the light on its not like a car that stores ur code Quote Link to comment Share on other sites More sharing options...
Radio Flyer1647545514 Posted April 20, 2010 Author Report Share Posted April 20, 2010 07sv650s by the way. Seems when I got WOT it likes to pop on around the 6k-7k range on my tach. Quote Link to comment Share on other sites More sharing options...
Radio Flyer1647545514 Posted April 20, 2010 Author Report Share Posted April 20, 2010 After more reading on this it looks like it's common problem that I shouldn't have to worry about. Quote Link to comment Share on other sites More sharing options...
ponyjr1647545514 Posted April 21, 2010 Report Share Posted April 21, 2010 you just put on a pipe and a power commander right? try unhooking the PC and see if it still does it. SOME times there are faulty units, i know a few people have gotten bacd ones, if so just sent it to dyno jet and have them repair/replace the unit. Quote Link to comment Share on other sites More sharing options...
Radio Flyer1647545514 Posted April 21, 2010 Author Report Share Posted April 21, 2010 you just put on a pipe and a power commander right? try unhooking the PC and see if it still does it. SOME times there are faulty units, i know a few people have gotten bacd ones, if so just sent it to dyno jet and have them repair/replace the unit. I'll try that out but from what I've read it's a bug on the SV's. Good seeing you at Pony today. Quote Link to comment Share on other sites More sharing options...
fas1k Posted April 21, 2010 Report Share Posted April 21, 2010 Ya, I would sill try to check the code when the light does come on, just to be on the safe side Quote Link to comment Share on other sites More sharing options...
Radio Flyer1647545514 Posted April 21, 2010 Author Report Share Posted April 21, 2010 Ya, I would sill try to check the code when the light does come on, just to be on the safe side Where do I plug the wire into exactly? I tried this today and couldn't find what connections the wire was supposed to go into. I know what plug, just don't know what slots. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.