need windshield banner installed

[lawnman]

I have a saleen windshield banner that needs installed on my car .

I tried one myself and it did not go well , so I had to buy a new sticker.

Edited July 8, 2011 by lawnman

[Browning]

just remember to spray windshield with a good dishwashing liquid + water solution and nothing can wrong. You'll have tons of time to align it

[Not Brian]

Is it really a Saleen?

[-Alex-]

Lay it exactly where you want it, then tape the top in place with some masking tape. Get a spray bottle and put some warm water with a drop or two of dish soap in it. Lift the banner up (leaving it taped in place) and spray the windshield where the banner will be. Carefully remove the backing on the banner, then lay it down on the windshield. The soapy water will give you plenty of time to slide it around a bit until it's perfect. Use a squeegee (or credit card) and start pressing the soapy water out from under the banner. Once you've got it pretty well dry, let it sit in the sun for a bit (the sun will shrink up any small bubbles in the vinyl) then squeegee it again and remove the remaining tape/vinyl backing and you should be good to go.

[lawnman]

Is it really a Saleen?

 

hahaha yes.

[lawnman]

thanks, I will try this tomorrow.

I did not use any liquid with the first banner and it was not pretty.

[lawnman]

thanks, it turned out perfect and was actually easy to do .

[frenchy chan]

this is good to know!