rb26deet32 Posted May 18, 2012 Report Share Posted May 18, 2012 I built this motor a while back but never ended up finishing the car and now don't really care to. So here we go. The engine is a 81.5mm b18b1 short block with 0 miles. Hasn't even been broken in yet. CP Pistons, Honda/ACL bearings, eagle rods, block guard, just back from machine shop where it was completely rebuilt. All bearing oil holes chamfered for better flow. The motor was set up for 500whp but it all depends on what you want to do on stock sleeves. I also have a fully built ITR head with full supertech valvetrain and a stage 3 P&P. Combine the two and you have a shit ton of power. I also have literally everything else you would need to put it all together. But I'm looking to get rid of the two big things for a car or bike. Let me know what you have. Open to all offers except rusty pieces of shit, atvs, boats or trucks. Besides that I'm pretty open to everything. Also if you go and price everything I have in it's condition it's about $3k for the block and $2k for the head. So I'm looking for a trade in the $5k range. And like I said, I have a crap ton of other parts that I can throw in. I just don't feel like listing everything. If you have any questions or are interested TEXT me at (614)625-7296 DO NOT CALL. I have limited minutes on this phone. Email me at rb26deet34@gmail.com Link to comment Share on other sites More sharing options...
rb26deet32 Posted May 19, 2012 Author Report Share Posted May 19, 2012 Bump. I'd literally trade for anything that has ac and decent gas mileage. Let me know what you have. Link to comment Share on other sites More sharing options...
rb26deet32 Posted May 26, 2012 Author Report Share Posted May 26, 2012 (edited) Well I traded a few parts for a 08 cbr1000. Now I'm trying to figure out where the hell I'm going to park the thing... I live on the end of a court. I have 3 cars, 2 in the garage and 1 in the street. I also have a big ass wrap around concrete porch and a shed in the back with my mowers and stuff. I'm thinking my best option for storing the bike is going to be in the garage in front of one of the dailies but I don't want to have to move them every time I get the bike out... The porch is tempting. Only issue with that is I'd have to use the stairs on the side of the house and they are pretty steep. Any ideas? Edited May 26, 2012 by rb26deet32 Link to comment Share on other sites More sharing options...
rb26deet32 Posted June 8, 2012 Author Report Share Posted June 8, 2012 Also looking to trade my turbo, bov, wg, fuel setup, turbo manifold, hasport mounts, IM's, eg shell, wheels/tires for a 600+ bike. Here are a few pics of the engine/turbo and what not. The shell is a rolling 95 eg shell with a 6 point with new brake lines, rear disc swap and so on. http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_20111026_205238.jpg http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_20111026_205127.jpg http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_20111026_205227.jpg http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_20111026_205019.jpg http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/aaa.jpg http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_1734.jpg http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic2.jpg Link to comment Share on other sites More sharing options...
rb26deet32 Posted June 26, 2012 Author Report Share Posted June 26, 2012 Bump it up. Looking to trade for either a good daily or a bike. Here is the complete part list to make it easier. 1992 civic eg shell with 6 point cage (stripped) -braided brake lines -new brake lines -s2k brake valve and reservoir -gsr rear disc swap -extended studs B18b1 block -0 miles since rebuild -81.5mm cp 9.0:1 pistons -Eagle Rods -Honda/ACL bearings -all new seals/gaskets/bearings -water pump/oil pump -All work was done by Jon Moore at Moorspeed Performance B18c5 ITR head -Oversized supertech intake/exhaust valves -oem valve seals/guides -accord LMA's -Complete Supertech valve train -Stage 3 port intake/exhaust -vtec solenoid -valve cover Tial 50mm bov Precision 46mm wastegate -tons of springs for boost from 4-32psi Precision sc6176 turbo -0 miles since rebuild -Journal bearing Neukin mini ram manifold -T4 -V band flange Neukin 3" downpipe -flex pipe -3" straight pipe all the way out the back Drag wheels and BFG tires -Both are brand new, never been driven on MSD ignition cap and boost coil NGK wires Pro comp gauges -A/F, Boost, Oil pressure Hasport Motor mounts -B series in an eg -Brand new Aeromotive a1000 fuel pump, controller Black nylon braided fuel lines and fittings for an eg/ek -Brand new, was going to use on the race car Aeromotive FPR I have pictures of everything. If you want to see something just let me know. But as of right now if you have something you'd like to trade just let me know what you want from the list and I'll let you know if it works Thanks. Link to comment Share on other sites More sharing options...
TurboNova Posted June 26, 2012 Report Share Posted June 26, 2012 what size is the braided line Link to comment Share on other sites More sharing options...
rb26deet32 Posted June 26, 2012 Author Report Share Posted June 26, 2012 I'm thinking -8 and -10 but it's been months since I've looked at it. Setup was good for a lot of power Link to comment Share on other sites More sharing options...
vtecmelee Posted June 26, 2012 Report Share Posted June 26, 2012 Can I get some more pictures it have a gsxr 750 that i may be interested in trading. Link to comment Share on other sites More sharing options...
rb26deet32 Posted June 27, 2012 Author Report Share Posted June 27, 2012 Can I get some more pictures it have a gsxr 750 that i may be interested in trading. What do you need pictures of? Link to comment Share on other sites More sharing options...
rb26deet32 Posted July 26, 2012 Author Report Share Posted July 26, 2012 Ok, I got a new car. Now I'm just looking to sell and get some spending money. New prices are Built b18b short block $2,000 Built GSR head $1,500 Willing to deal on everything else. Just let me know what you are interested in. I spent over $5k on the block and head alone. Thanks. Link to comment Share on other sites More sharing options...
rb26deet32 Posted July 30, 2012 Author Report Share Posted July 30, 2012 All prices are OBO. Also considering trading for things like... Tig welder 2 post lift air compressor/tools tool case work bench And anything else that could be used in a shop. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts