Toph6888 Posted February 27, 2013 Report Share Posted February 27, 2013 Looking for a good exhaust shop, pretty much I will have a 3" exhaust to a split for (2) 2.25" through my flowmaster mufflers, but I am thinking of just have a shop do the muffler back exhaust around my new IRS on my mustang. So pretty much looking at have just a couple bends done. Any suggestions? Quote Link to comment Share on other sites More sharing options...
gbracing81 Posted February 27, 2013 Report Share Posted February 27, 2013 Mad Hatter Quote Link to comment Share on other sites More sharing options...
stangsn95gt Posted February 27, 2013 Report Share Posted February 27, 2013 Mad Hatter Came to post this, I hear they do good work. Quote Link to comment Share on other sites More sharing options...
bmwohio Posted February 27, 2013 Report Share Posted February 27, 2013 Hmmm, think they would they do a custom 3" header back exhaust too? Quote Link to comment Share on other sites More sharing options...
zeitgeist57 Posted February 27, 2013 Report Share Posted February 27, 2013 Hmmm, think they would they do a custom 3" header back exhaust too? I'm sure of it. The piping may be aluminized, and not mandrel-bent, but at least they will give you a no-bones price quote for you to figure out what to do. Mad Hatter Muffler on Sullivant Ave FTW http://www.yelp.com/biz/mad-hatter-columbus Quote Link to comment Share on other sites More sharing options...
bmwohio Posted February 27, 2013 Report Share Posted February 27, 2013 I'm sure of it. The piping may be aluminized, and not mandrel-bent, but at least they will give you a no-bones price quote for you to figure out what to do. Mad Hatter Muffler on Sullivant Ave FTW http://www.yelp.com/biz/mad-hatter-columbus Hmmm, I would want Mandrel bent for race exhaust. Least air disturbance as possible. I'll check them out. OP, thanks for making the thread Quote Link to comment Share on other sites More sharing options...
M0nk3y Posted February 27, 2013 Report Share Posted February 27, 2013 Hmmm, think they would they do a custom 3" header back exhaust too? I like where this is going Quote Link to comment Share on other sites More sharing options...
Alex L. Posted February 27, 2013 Report Share Posted February 27, 2013 I've done a couple exhausts before. Quote Link to comment Share on other sites More sharing options...
Patterson Posted February 27, 2013 Report Share Posted February 27, 2013 We can handle it for you. Best way to go about it is a custom Y-Pipe to a Exhaust already built for a Cobra. Quote Link to comment Share on other sites More sharing options...
AudiOn19s Posted February 27, 2013 Report Share Posted February 27, 2013 My .02 I'm not taking away from anything Mad Hatter does...they do quick, cheap, patches and fixes. I would not want them doing a custom exhaust project for me on something I cared about performance on. That's just not their bread and butter. When the flex pipe fails on the Audi I know for certain I'm driving to the hood to have them do it again. It's pretty much an every 2 year thing. Tinman, Alex, Jason @ IPS would be the first few people that come to mind for what you're looking to have done. They will work with proper materials, mandrel bends and get you something well thought out with great fit and proper engineering. ...but don't bother Tinman for a couple weeks he might be tied up with an exhaust project on a certain yellow car I know. Quote Link to comment Share on other sites More sharing options...
Nickey4271647545519 Posted February 27, 2013 Report Share Posted February 27, 2013 Mike's Custom Garage 25 Marion Street Mount Vernon, OH 43050-1521 (740) 392-2358 He's been doing my familys exhaust for 20+ years now, it doesn't get better than the work that Mike does. 04SVT has a full stainless exhaust done by Mike on his Cobra and it's beautiful. Quote Link to comment Share on other sites More sharing options...
bmwohio Posted February 27, 2013 Report Share Posted February 27, 2013 We can handle it for you. Best way to go about it is a custom Y-Pipe to a Exhaust already built for a Cobra. My .02 I'm not taking away from anything Mad Hatter does...they do quick, cheap, patches and fixes. I would not want them doing a custom exhaust project for me on something I cared about performance on. That's just not their bread and butter. When the flex pipe fails on the Audi I know for certain I'm driving to the hood to have them do it again. It's pretty much an every 2 year thing. Tinman, Alex, Jason @ IPS would be the first few people that come to mind for what you're looking to have done. They will work with proper materials, mandrel bends and get you something well thought out with great fit and proper engineering. ...but don't bother Tinman for a couple weeks he might be tied up with an exhaust project on a certain yellow car I know. Roger that...thanks Quote Link to comment Share on other sites More sharing options...
mseebs Posted February 28, 2013 Report Share Posted February 28, 2013 I had Rob at gear head do my first exhaust for the tupperwear. He did a great job and gave a great price for it too. My buddy also had him do his jeeps exhaust. Came out great. http://gearheadbuilt.com/ Quote Link to comment Share on other sites More sharing options...
spankis Posted February 28, 2013 Report Share Posted February 28, 2013 I've done a couple exhausts before. And a fine job he did, even with 5" stainless! Quote Link to comment Share on other sites More sharing options...
DOZZER Posted February 28, 2013 Report Share Posted February 28, 2013 Solo Muffler.. Before any bitches about them not doing performance exhaust they do Frido's exhaust work and I send my exhaust work there. Quote Link to comment Share on other sites More sharing options...
PGH STEELERS Posted March 1, 2013 Report Share Posted March 1, 2013 So glad you posted this. I'll be doing a custom exhaust this spring and was just about to ask the very same question. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.