Jsvob03 Posted September 3, 2009 Report Share Posted September 3, 2009 So, i decided to check the alignment of the front wheel to the back, as i've been getting a head shake at lower speeds.For those that are unaware, there is a DIY on ex-500.com. basically you run a string from the rear of the bike, to the front. this acts as a reference; lets you know the path the front tire is taking in respect to the rear tire.First pic is the right side, second is the left. The alignment itself is pretty close. whats concerning, is the offset of the front, when compared to the rear (as judged by the distance between the string, and the wheel, when comparing the left to the right.). Quote Link to comment Share on other sites More sharing options...
Wheezle Posted September 3, 2009 Report Share Posted September 3, 2009 Um bud, THe size difference in the tires will do that. If you are checking to see if you are aligned run a string down both sides and measure the distances from the tires. For example run two strings parallel to each other at 8" apart. Center the bike in between them. Now measure the distance to the tires. Depending on the offset of your tires from the factory they should be the same. Now in some cases they will not ie: my Honda has I believe 3/16 or 1/8 difference in the rear from the front as to where center is. This is not uncommon among manufacurers. Quote Link to comment Share on other sites More sharing options...
Jsvob03 Posted September 4, 2009 Author Report Share Posted September 4, 2009 turns out it was just a mis-alignment. Fixed it, and it was all better. Quote Link to comment Share on other sites More sharing options...
NinjaNick Posted September 4, 2009 Report Share Posted September 4, 2009 I use a chain alignment tool and not the hash marks. Really easy and inexpensive buy. Quote Link to comment Share on other sites More sharing options...
Jsvob03 Posted September 7, 2009 Author Report Share Posted September 7, 2009 oh yeah, hash marks are no good. im gonna have to look this tool up. Quote Link to comment Share on other sites More sharing options...
creep Posted September 7, 2009 Report Share Posted September 7, 2009 Motion pro makes a chain alignment tool for around $25. http://www.kneedraggers.com/details/Motion_Pro_Chain_Alignment_Tool--56-MP-5.htmlThe laser ones are nicer, however cost more money.You could make your own for less, depending on how handy you are. Quote Link to comment Share on other sites More sharing options...
35RFTW Posted September 11, 2009 Report Share Posted September 11, 2009 There is a company called MPH is upper Ohio that we send frames when we need to get them fixed or check for straightness. They claim it will be better than factory when they are done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.