electrical help needed.

[KawiGurl]

Ok so I put new flush mounts on a week ago and everything was great. I then moved on to putting a fender elim kit with new back turn signals. now that i have everything back together whenever I turn the turn signal on (either side) all four lights come on. wtf? I am super newb at working on a bike but like I said had no issues doing the front signals. Any suggestions would be great!

[mahdey]

you need the load equalizers

[ducati guy]

dumb question but gotta ask, did you hook up any wires backwards in the rear, also is this an intergrated taillight?

[KawiGurl]

you need the load equalizers

Yeah I have looked in to this and I am pretty sure this may be my problem. I appreciate the advice. Hopefully I can buy these and be able to install them easily. Thanks:cheers:

[KawiGurl]

dumb question but gotta ask, did you hook up any wires backwards in the rear, also is this an intergrated taillight?

I am sure that i hooked everything up correctly. it's not an integrated tail light now. just new fender elim w turn sigs and the LP led light

[Likwid]

you need the load equalizers

+1

[mahdey]

were you able to get this issue resolved?

[2WheelSwagger]

I'm curious too, did the load equalizers do the trick? or no?

[wht_scorpion]

Ok so I put new flush mounts on a week ago and everything was great. I then moved on to putting a fender elim kit with new back turn signals. now that i have everything back together whenever I turn the turn signal on (either side) all four lights come on. wtf? I am super newb at working on a bike but like I said had no issues doing the front signals. Any suggestions would be great!

were they leds is so get leds resistors they bridge neg and pos. wires for each blinkers with leds check the web for them

I did this to my bike

[Benyen Soljax]

you don't need to go and buy specialized "load equalizers" that cost $$ (they're just resistors in pretty packaging). Like ^^ said you just need resistors to increase the load where incandescent lights used to be. A quick search on the web might be of help.

[$pecial_K]

I used one of these on my bike after installing an integrated tail light.

http://www.tobefast.com/c-led-electronic-flasher-relay-c-63430-p-1-pr-10001075.html