YSR_Racer_99 Posted December 14, 2011 Report Share Posted December 14, 2011 I'm on ebay shopping for some shorty levers for the SV. Chinese all over the place for $36+. ASV from an American seller for like $146. I would really rather support the American seller, but at that much of a difference, I can't bring myself to do it. Heard some guys talking in Harbor Freight (of all places...) the other day about looking for a good floor jack, and everything the found (at other stores) is Chinese. They've got us up against a wall. Facing it. In a perp spread. Quote Link to comment Share on other sites More sharing options...
max power Posted December 14, 2011 Report Share Posted December 14, 2011 I bought a harbor freight jack. Total piece of shit. Won't support my 400# atv overnight. Drops under its own weight. Quote Link to comment Share on other sites More sharing options...
J_Copeland Posted December 14, 2011 Report Share Posted December 14, 2011 Buy the ASV !Worth the extra cash ! Quote Link to comment Share on other sites More sharing options...
Moto-Brian Posted December 14, 2011 Report Share Posted December 14, 2011 The chinese levers are shit. They are not machined from the same material and they are typically pressed or cast and made to look like CNC machined higher end aluminum.We had a set of rearsets a guy was using from a chinese maker and they actually broke at the seam where they were pressed together. I mean, you crash, they will break and fail as will the good stuff. However, if it falls over and hits and fractures and you don't know it and hope they don't fail while riding your bike, you get off lucky where the ASV levers will most likely not bend and will certainly not fracture and you are good to go.With the budgets being so tight on race teams all over the world, if the chinese shit was worth a fuck, they'd be running it on their bikes. As far as I know and from the racers I run with or am around, not a single privateer puts faith in Chinese shit...Car jacks aren't as important as levers... Quote Link to comment Share on other sites More sharing options...
bowdog Posted December 14, 2011 Report Share Posted December 14, 2011 Car jacks aren't as important as levers...Tell that too the guy working under the car!! Quote Link to comment Share on other sites More sharing options...
Hoblick Posted December 14, 2011 Report Share Posted December 14, 2011 i had the chinese levers on my track bike.. they were actually very good quality, and contrary to KTM brians post they are machined. i saw them raw at the dealer show last year. Quote Link to comment Share on other sites More sharing options...
YSR_Racer_99 Posted December 14, 2011 Author Report Share Posted December 14, 2011 Actually, these are for the broke-dick SV1k (strangely not called the S-Vee while the lil one would be the S-Wee according to VStrom criteria. Thank goodness). I done did something to it, now the fuel system won't prime/ pressurize. I've got the Chi-Comm shorty's on the 6, and they've done just fine. I'm not a machinist, so can't say for sure, but they seem to be machined from solid billet. Its the whole "supporting China and sealing our own fate" thing for me. They're gonna crush us. Now, gotta go out and buy that new Korn CD.I had CRG levers on my 748. I loved 'em. They were expensive' date=' but it wasn't like I was riding some broke-dick SV650. You'd probably be alright with the Chi-Com bits. After all, Hobs' Harley is ~85% Chinese.. and he's not ashamed to ride it. Not really sure who/what you're trying to be, but just remember to know your role. Who do you think you are? #petty bourgeois.Ok.. actual reply: I installed a set of the Chinese adjustable levers on a customer's Monster. They were quite nice, save for one small issue. The new levers didn't have enough material to adequately trip the brake switch. The customer had to modify his switch to make it function with the lever. Other than that, they were nice. Depending on what kind of modifications you'll have to do to accommodate the quality control, it may be beneficial to buy the USA bits. Hard to say if the SV levers have this same issue, but that's the firsthand knowledge I have of them. Good luck. [/quote'] Quote Link to comment Share on other sites More sharing options...
Mykill Posted December 14, 2011 Report Share Posted December 14, 2011 I have eBay ones on mine. They seem ok but I bought these http://www.cyclesector.com/JPR_PERFORMANCE_SHORTY_LEVERS_p/jpr-performance-levers.htmwell see how they are when they come in. Quote Link to comment Share on other sites More sharing options...
Moto-Brian Posted December 14, 2011 Report Share Posted December 14, 2011 i had the chinese levers on my track bike.. they were actually very good quality, and contrary to KTM brians post they are machined. i saw them raw at the dealer show last year.Just going off of what I saw from one guy... I am sure some can come machined. I would bet they aren't the same grade aluminum, though...Oh, and don't forget that at the dealer show, they can actually do one off stuff to showcase their product and you get a very different product at production level... Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted December 14, 2011 Report Share Posted December 14, 2011 havent had those exact levers, but i had cheap chinese levers on the vmax and i had to hit the brakes hard (left a light in a group ride with some OR folk, and the person directly in front of me stalled)...the brake lever actually snapped right at the base, and once that happened i didnt really have control of the bike anymore and dropped it at like 1mph lol..no damage...but had to ride home without a front brake...i will never use junk levers again on anything Quote Link to comment Share on other sites More sharing options...
DucatiDern Posted December 14, 2011 Report Share Posted December 14, 2011 I had the asv on my speed triple and they survived two crashes. They lost the shiny coating but for 150 dollars to never buy levers again is by far reasonable. Quote Link to comment Share on other sites More sharing options...
RSparky Posted December 15, 2011 Report Share Posted December 15, 2011 hm. i had the el cheapo shorty levers on my 650. never heard anything bad about them until now. i just figured it's a "made in amurrica from amurrican alumniumnium" markup... they held up fine for me while i had it. :-/ Quote Link to comment Share on other sites More sharing options...
TSB67 Posted December 15, 2011 Report Share Posted December 15, 2011 There may be some decent stuff to be had out of China, but there is a big difference between a solid company manufacturing things in China and controlling the quality, and some random chinese company making cheap knockoffs. Your $36 levers are probably the latter. Quote Link to comment Share on other sites More sharing options...
mgbgt89 Posted December 15, 2011 Report Share Posted December 15, 2011 Buddy of mine bought crappy levers for his 954. They were so far off from stock his brake light switch was always on. I think he had to glue a piece of plastic to the lever to get them to actuate the switch properly. Quote Link to comment Share on other sites More sharing options...
Hoblick Posted December 22, 2011 Report Share Posted December 22, 2011 cant comment on the brake light trigger thing, for the f4i was a track bike only. but it did trip the clutch switch if thats any helpi was impressed by the quality of the levers.. i think i paid $60 shipped or something. took a while to get them but for the money i was more than pleased Quote Link to comment Share on other sites More sharing options...
Beegreenstrings Posted December 22, 2011 Report Share Posted December 22, 2011 Tell that too the guy working under the car!! No shit there... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.