Anden Posted December 4, 2012 Report Share Posted December 4, 2012 I've got m12 castle nut, jam and nyloc here if you need. M10 stuff is slim pick'ns. I will throw them in a bag if Helmutt has no luck at work I will leave them in the car. Stop by work and work and grab them on your way through. Quote Link to comment Share on other sites More sharing options...
Helmutt Posted December 4, 2012 Report Share Posted December 4, 2012 Thanx Lee, we "should" have these metrics onhand since we're a Mercedes owned dealer.....AND we just got done with inventory last week so shit better be on point! Quote Link to comment Share on other sites More sharing options...
max power Posted December 4, 2012 Report Share Posted December 4, 2012 Doesn't take a mechanic to put a nut on a bolt and tighten. Quote Link to comment Share on other sites More sharing options...
Helmutt Posted December 4, 2012 Report Share Posted December 4, 2012 Im one block north of kiamys..... Corner of greene n new. Best bring some tools cause what i have is at the shop. Do i go to honda in troy to get a new nut n washer? Cant fragn beleive this happened....... Never let a "friend" work on our bikeGot some hardware that should work fine, tools are in the truck, should be closer to 530pm before I get there. BUT......there would be 4 homes to choose from at an intersection, so which one would be yours sir? 1 Quote Link to comment Share on other sites More sharing options...
Reimbrandt Posted December 5, 2012 Author Report Share Posted December 5, 2012 Didnt see you asked that...... Guess the truck was a dead give away. . Thatnks again hellmutt for the help..... Sorry ya about froze snot..... LoL... I made a funny Quote Link to comment Share on other sites More sharing options...
Helmutt Posted December 5, 2012 Report Share Posted December 5, 2012 No problem man, bring it by the garage Friday so OldSchool and I can give it a good once over - surely I missed some things without proper light and more tools would've been handy too. 1 Quote Link to comment Share on other sites More sharing options...
Reimbrandt Posted December 8, 2012 Author Report Share Posted December 8, 2012 Thanx to hellmutt and oldschool the CBR is better off..... And so am i. Had some issues that could have been bad..... Will do a little more in the next couple weeks or so when im getn it touched and prettied up for cyclefest. Quote Link to comment Share on other sites More sharing options...
redkow97 Posted December 8, 2012 Report Share Posted December 8, 2012 The shock nuts are a good idea, but if that ever happens again and you can't get a replacement, cannibalizing the shock nut to use on the engine mount is relatively safe. Your weight is on the shock bolt. It's not going anywhere while you're riding. In fact I have to use a lever to lift the rear wheel and compress the shock to remove them. You're talking hundreds of pounds of tension. In a pinch, that is one to go without. On the linkage I mean. Maybe I'm misunderstanding what fell off. Regardless, glad you're back on the road. Quote Link to comment Share on other sites More sharing options...
Helmutt Posted December 8, 2012 Report Share Posted December 8, 2012 The rearmost lower engine mount bolt's nut was missing and had backed out several inches. The lower shock linkage bolt's nut was missing. And then last night OldSchool and I found that the swingarm pivot bolt/nut were only finger snug, some of the sprocket nuts were far from spec torque, the rear axle nut was maybe 20lbs at the most, the turn signals do not work anymore ( possibly relay, but we're thinking a wiring/ground issue ) and the chain has quite a few kinked links in it. The hack that put his bike back together ( before he took into a real shop ) surely put it to him, so here soon when he tears the bodywork down for paintwork touchup - OldSchool and I will make a list of all that it needs and be able to chase wiring a lot easier without the fairings in the way. Jim, you were lucky bro.....so glad that swingarm pivot didnt come apart. Could've been wicked bad stuff happen to ya. We'll get ya fixed up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.