Bubba

Please note that I've changed my contact number!!! Cell # is 5one3-5sixO-one94two [Text only pls] Sorry for the confusion….old-timers disease….

Hmmm….they couldn't possibly screw up coffee, could they? I recommend sticking with the veggie entree….

Route--Edgewood KY 41017 to Williamstown KY 41097 https://goo.gl/maps/Px444 Williamstown to Idlewild/I-275 interchange https://goo.gl/maps/dro7j

Sounds like you guys are on-board for Sunday. Here's a map of where we'll meet--Exit 80/KY Rt 17 off I-275 in NKY: Coming south from Dayton, it's about 50:50 whether you take 75S across the river and head east on 275E or take 75S to 471S and head west on 275W….your choice. We'll meet at the McDonalds just south of the interchange. WIth a route ride time of approx 6 hours, we should try to roll early enough to get you home by dark o'clock. Let's say we meet at the McD's between 10 and 10:15. There's a Thornton gas station next door to fuel up before the ride--kickstands up promptly at 10:30. In case you have to head home early, there are lots of bail-out points in the route along the I-75 corridor in NKY to short-cut and roll north. Fuel, snacks and road food can be had in both Falmouth and Williamstown near the ride's mid-point. NOTE CHANGE!!! If you need to get hold of me for last minute change of plans or emergency, cell # is 5one3-5sixO-one94two [TEXT ONLY PLS!]

Here's the forecast for Sunday. Gonna be a chilly start but a pretty day: I knocked out a route that runs about 175-200 miles from the starting point along the 275 loop in NKY. Google map calculates ride time at 5'45" not including stops. Includes some of the favorites like 10 from Alexandria to Willow and 22 from Willow to Williamstown, along with a few lesser-known surprise favorites. Not enough daylight/too many total miles to include the awesome 227 south to Stamping Ground, but if you like what you see this fall, we can always map something that includes 227 for next summer when the daylight lasts longer. Disclaimer: These roads are rural and there's always the possibility of Sunday church folk, slow field equipment, dogs, cats, farm animals, mud/gravel/manure on the routes, so ride at a speed that accommodates your sight lines. Typical pace is 10-20+ posted limit in the fast sections with max of 70MPH-ish. Lemeno what you decide to do by Saturday noonish so I can make the final arrangements and post a link to the meet-up time/location.

Based on your description of how it'll be constructed, the mesh would be superfluous. What mesh and reinforcement rods do is 1) give some additional strength in high traffic areas; and 2) keep the slab in one piece when it cracks….which it inevitably does if subjected to heavy vehicles. You'll be fine unless you plan to put on a ton of weight as you age. EDIT: Be sure to use a groover and put crack/stress reliefs in every 4' or so. For a 4" pour, your relief should be 3/4" to 1" deep. Or saw-cut it after it cures.

I know logistics including the extra 35-40 miles roll from Dayton in the morning and evening are hard to overcome, but I'd be up for volunteering to put together a route of 150-200 miles of NKY goodness if you wanna head south from Dayton. Could do fewer miles, but you'll miss out on some of the classic roads. Lemeno by Friday if there's enough interest--also presumes the weather is gonna cooperate--and I'll dig thru some of my old LocalRiders routes and post up a map. Technically, I guess Cincinnati is REALLY part of northern KY anyway….

No wonder. That looks like the Carroll Shelby model.

Yup. And my Craftsman (Yeah, yeah….I've heard all the Crapsman jokes) wrenches cost me $29.95 on sale and are still functional after daily home garage use over a 20-30 year period. One of the wrenches in the set was mis-cast, which wouldn't happen with the Mac or Snap-On set, but I returned it for a new one without a hassle. If I did mechanic's work for a living, I might be able to justify the high cost of a stuffed roll-box in the 10s of thousands. You obviously get value out of your high-end tools and that's a good thing.

Cool concept/product, but that is a metric shit-ton of cash for 5 box-end wrenches. I'd feel a lot better about their longevity, too, if they were 6-pt instead of 12-pt….

Here's your clue. HH pads are really meant for high-speed aggressive braking and are way more 'touchy' to initial lever pressure than OEM organic pads. I wouldn't recommend them for typical street riding unless I was planning on railing the backwoods at triple digits. Putting them on the back brake is a recipe for a low-/high-side.

I've watched several videos similar to this over the years. Can't help but think how fast the SHTF!!! Obvious the rider was going way over what a reasonable speed should be given the traffic situation. Presume the motorway had limit of 50 KPH--typical for suburban highways in GB--which is just a few ticks over 30 MPH. He had to be pushing 60+ MPH. My opinion is that there's no way EITHER driver could have avoided that collision at that speed. It's ironic that the within the last few 100 to 150 ft of the bike's journey, there was a large "SLOW" sign painted on the roadway at the beginning of the intersection markings. RIP rider….

Unless you're doing some heavy hauling on a daily or at least weekly basis, a monster turbo-diesel as a DD is kind'a like swatting flies with a 6# sledge. I've had several Fords--an F250 4x4 with the 5.4 gas and my current F150 2WD XtraCab with the 4.6 gas--and they have been nearly flawless over the several hundred thousand miles I've driven them. The newer Triton blocks are pretty stout motors that, with the VVT, put out plenty of real-world torque at decent efficiency. I routinely get 18 MPG in mostly town driving and have seen 21-22 MPG on long interstate trips. A couple of years ago, I hauled a 16' box trailer with 3 bikes and gear to CO and back at 70-80 MPH on I-70 and averaged over 14 MPG. I'd recommend staying with the '09 and later models that had the 6-spd tranny.

LocalRiders crew does a group ride to the Waynesville/BRMC area every Sept. Here's a few links from previous years: 2012: http://www.localriders.com/forums/showpost.php?p=160575&postcount=82 2013 Day 1: http://www.localriders.com/forums/showpost.php?p=160774&postcount=97 2013 Day 2: http://www.localriders.com/forums/showpost.php?p=160775&postcount=98 2013 D1&2 with GPX file links: http://www.localriders.com/forums/showpost.php?p=160786&postcount=101 2013 Return: http://www.localriders.com/forums/showpost.php?p=161075&postcount=192 2014 Day 1&2: http://www.localriders.com/forums/showpost.php?p=164437&postcount=88 I know these don't fill your needs as far as start or finish locales, but there's a whole bunch of good stuff in between. We're leaving Tuesday morning after Labor Day and coming back the following Sunday, so maybe our paths will cross. Have fun!!! Another fun route that's easy to follow is take 70 south from Jonesville, VA all the way to Hot Springs, NC, then 209 south to Waynesville.

This is why women are TOTALLY allowed to do cosplay….and why guys are not.

So… Is a cul-de-sac the same thing as a cod piece?

Welcome to OR!!! Where are located?

With respect to….? I agree with Dustin's assessment about the Pirellis vs the Mich PR3s. Never ridden the 4s. I think the Pirellis are a bit less expensive than the 4s.

I put a set on my FZ1. Easy to mount and didn't require much weight to balance, so high quality carcass. Rode 'em for several thousand miles--around town and on a week-long tour to NC where there was much 'hooning'…. They stuck very well and had good turn-in feel. Good wet weather manners as well. Note that I did switch from the OE 190/50 to a 190/55 and it helped a lot. Also mounted a set on a friend's FZ and he loves them too. He's getting about 6-7K miles use of pretty hard street riding (no track). He's on his second pair and plans on buying again when this set is shot. Bottom line--you can get longer lasting, you can get stickier, you can get cheaper, but these do it all pretty well for a reasonable price.

Apparently, I don't qualify. Although I am old, I am neither distinguished nor a gentleman. That, and I don't want to hack off the front and rear fenders of my WeeStrom so I can call it a 'bobber'…. If anyone is willing to lend me their classic, impeccably restored Ariel Square 4 for this event, please PM me early enough so that I may at least grow a bushy beard.

My guess, too.

I had a buddy who wasn't the brightest bulb in the box, but a big guy, 6'6" 250ish, who espoused the theory that if a little is good, a lot is better; therefore, a metric shit-ton is the cat's meow! He prolly wasn't the best guy to be a gun owner, but hey, it's 'Murica, baby. He bought a double-barreled 10g through private sale, and being a rocket scientist, did several things an educated gun owner would NEVER do: he took the gun out hunting without ever having fired it, he went to his duck blind alone in the late afternoon, and in the biggest-is-best mode, bought heavy-shot magnum loads for it. At some point during the early evening, the flock started to set down on the lake and he jumped up, accidentally tripped BOTH TRIGGERS almost simultaneously. The gun barrel jumped up, hitting him in the forehead and knocked him out cold. He woke up (luckily) a few minutes later with blood running in his eyes, laying in his blind. If he did actually hit the ducks, I presume they sank immediately. He took the gun home and to my knowledge, never fired the thing again. What's even more humorous is that I learned of this because he was telling the story on himself at work. Like I said, 'Murica baby!!!

The part I don't understand is that, on the face of everything I've seen in the news, documentaries and videos, they seem to have a great love of their children--at least the male ones--and their families. How that idea can be perverted into the teaching of hate, intolerance and self-destruction in the name of their god is beyond belief and understanding, at least for a westerner. The only rationale I can up with is that it's based on pure ignorance, and the compelling need to continue to perpetuate ignorance.

BTD: So….weren't those videos all of the same chick singing the same song? I couldn't concentrate well after my eyes rolled back in my head…. Need more drugs.

Yeah, this is why most people (riders) I know call 'em 'cheese graters'…. Please note that the statistics often quoted about the system being safer means that, along the highway right-of-ways that are equipped with the cable barriers, there is a statistically lower injury/death rate per mile than a similar area with guard rails or other system. This DOES NOT MEAN that the cable systems are necessarily safer for the driver initially involved with the barrier contact….merely that the barrier successfully kept the initial vehicle from crossing the median or contacting other vehicles traveling along the freeway. One death--yours--is statistically safer than multiple deaths possibly occurring from a cross-median collision.