Wes Stone

HAHA, No Ds!! I'm throwing some Welds with some 275/60 15's on that bitch so I can do wheeeeelies I have an angle grinder and a hammer lol

Does anyone have one of these I could borrow or rent or know where I can rent one? Probably going to have to roll the fender lips on the Cutty. Thanks,

I'm trying to help a friend of ours sell some tools. Her husband passed away last October and she's trying to get rid of some of this things. I went through his toolbox and tools and I think its worth about $2500. Would like to sell it as a lot. All of the impact tools are where most of the money lies. Most of them are vintage MAC tools. I'll list it the best way I can. MAC Deep VDP 7/16, 1/2, 9/16, 5/8, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 1/4 MAC Deep VDP 10mm, 12mm, 13mm, 15mm, 16mm, 17mm, 18mm, 21mm MAC VUP 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm MAC V6 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm MAC VP 3/8, 7/16, 9/16, 3/4, 13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4x2 VP6 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 24mm MAC AH234 1/2" Air Impact MAC AW434 Having a hard time finding info about this Snap On MT1261A Timing Light MAC TWV250 Torque Wrench MAC TWX100 Torque Wrench Snap On Far7200 3/8" DRIVE SUPER DUTY AIR RATCHET MAC CO Crows Foot 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 MAC CHBM Crows Foot 9mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mmx2 CHB Flarenut Crows Foot 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 MAC Tool Box MB1500 She would like to sell it as a whole. I might talk to her into parting it out if I have enough interest in things. You get everything in the box. There are a lot of things I didn't list. The wrenches, snap on screw drivers, MAC Tap and Die sets etc etc. Pics are here http://s311.photobucket.com/albums/kk457/stoney667/Tools/

Thanks, Sent you a PM as well.

Awesome! I'll swing by friday on my way in. Do you want me to just ask for you?

Brady I drive past pickups plus everyday on my way from home to work. If that's where I can pick it up i'd defiantly take one for $20. I'm trying to get one by Friday though. Not sure on a time frame.

No kidding on the local Let me see what I can drum up here first. Really trying to get this beast started this weekend.

Sounds like they bottom them out so it can't spin and then tighten the nut with the washers, i'll check out Metro on my lunch break tomorrow.

I saw this and thought it would be cheaper and work just as good. http://i183.photobucket.com/albums/x312/97ramsst/bc0a5280.jpg

Does anyone have a crank pulley tool I can borrow for the weekend to put my crank back on?? OR does anyone know where I can buy M16x2.0 threaded rod locally? Thanks,

I have an Olds Th350 FS. Has an aftermarket input shaft and Shift Kit. Asking $200 OBO I don't know what these go for normally. I had it behind a Olds 403 that was pushing ~400whp. Worked great. Does not fit on my LSx build though. Thanks,

Email sent to Brian. GEMoney let me know what you can do as well.

Im not even to the starting point yet. I have a standalone psi harness and i know i need vats removed before i even try to start it. I need my 42lb inj put in as well. Im just trying to cover all bases.

Can anyone remove vats from a pcm for me? It's an truck pcm. I have specifics but not on me atm. Thanks

I have a PTC 4000 Stall FS. I bought it from another member. Never got to use it. I picked up a new transmission that had a stall already. The only thing I noticed when I got it is that the 2 of the bolt holes were fine with my stock bolts. However one of them looks like it was retapped and I didn't have a bolt for it. So thats the only thing I found wrong with it. Model number is PTC10THR - $275 + Shipping & Paypal Starter I picked up at a Junkyard for my LQ4 - $60 Shipped Flexplate with GM Spacer to mate TH350/TH400 to LS - $85 Shipped Lokar TH350/400 Dipstick BNIB - $90 Shipped 317 Heads have a little P&P work was a project. I do not have valves. I do have stock springs, retainers, locks. I promise they are not butchered. I will get pics tonight. $200 Shipped

SOLD. I sold it to a friend. Tell your customer on clubgp.com/forum there is another guy on there selling one for $300 as well. Thats what they go for. They are on there pretty frequently. Thanks,

Sent

Selling my DHP PowerTuner. I'm looking for an HP Tuner instead. Would only trade + Cash for that. DHP is for 3800 vehicles. $300

I have a brand new CTS-V Pickup Tube and Oil Pan Gasket. Part Numbers 12621299 and 12612350. I bought them on GM Parts Direct. They backordered the pan so I bought a kit elsewhere that comes with everything. Total shipped from GMPD was $90.52. Looking for $75 obo

None right now. I'm building a LQ4 that will go in it if i don't find a serious buyer. TH350 trans with 4k stall as well.

Its not perfect. Does have some paint peeling and the small rust spots. Looks good from distances though. Odometer reads 33248, so its probably 133248.

Thinking about selling my 84 Cutlass roller. I was going to LS Swap this car. I really want to buy a Nova so lets see if there is any interest. Car is located in Lima, Oh. I can meet/deliver for the right deal as well. Here is what its got so far: 3.73 Richman Gears and Trutrac Limited Slip Diff Billet U-Bolt Caps Diff Yoke 10 Bolt 3” Exhaust, X-Pipe, Flowmasters 40's 4 Link suspension from Dick Miller Racing QA1 shocks in the rear Option Things I can include: Turbo 350 Trans w/ Shift Kit and Harded input shaft PTC 10" Mini Race Converter its a 4k stall Steel HD Driveshaft from Dick Miller Racing I can take pics of whatever you would like, interior is decent. Exterior is in very good shape. has 3 little rust spots that I can see. The size of a nickle i'd say. Does not have a radio in the car. At one point it had a stereo system in it and still has a bunch of speakers in the car. Car has been repainted. Rear bumper is pealing. Like i said I can get pis of whatever. I also have a Aftermarket EFI Gas Tank/Sender/Walbro that can go with it as well. Asking $3500 with everything obo Asking $3000 with trans, converter, drive shaft obo http://i1016.photobucket.com/albums/af281/stoney6677/218885_1972908208545_1418220004_2546010_7865721_o.jpg http://i311.photobucket.com/albums/kk457/stoney667/267967_10150714856035302_676645301_19774476_6532771_n.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06130703.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06130723.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06130730.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06130801.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06130818.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06130825.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06131440.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06131516.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06131450.jpg http://i1016.photobucket.com/albums/af281/stoney6677/2011-08-06131500.jpg

Wow!! Thats all I have to say!

Thanks guys. Still shopping for some 799's or 243's. I think i'll get better results and be happier in the long run. Turbo Nova love your car! Big Nova fan!

I want to see more pics of the cts-v wagon. Keep telling the wife that's what she needs.