RedRocket1647545505

Didn't I hear during the Michigan game that they just spent 1 million to have it re-sodded (sp?) ? What a way to waste some money. Though I could care either way what kind of carpeting they use.

Shingles off the roof, and my mom's $5k fountain fell the fuck over. She's not stoked.

Are you making fun of me again?

Again: Corvette > Mustang

I've had that same email address for damn near 10 years now. I have satellite hi-speed internet, but still have the dial-up as a back up. Besides, I think AOL is offering free email service now. I can't wait. I have heard nothing but good things from the vette PTK guys. There's only a handful running around, but still good things. I hope it doesn't take that long to get the kit. Some heads will roll if I don't have anything by the 3 month mark. I'm not too worried though. I'm also not really concerned about the heat. It's managable. I'm taking every precaution to deal with it, and I don't see it as being a problem. Besides, it give me a good excuse to buy a new hood. I'm also going to put some heat shielding on the underside of the hood. As far as running one like the Doc's. There's a few reasons that I went with the PTK over all others: 1. I'm not a fan of the low mounts. No real logical reason, I just don't like the idea of them being down there, closer to the elements. I also don't like that you're pretty limited to size down there. Granted, you could make more power than you could ever need with them down there. But still. 2. Not many people are running the PTK kit. I wanted to do something different. Everybody and their brother runs the TTiX kit. Not that that is a bad thing, just too common for my liking. 3. Price. PTS was having a hell of a sale, and I jumped on it. I haven't seen the same thing out of any of the other major players in the C5 TT market. However, I'm still going to buy a $1,900, so that offsets the cost. 4. I'm sure there's other reasons, I just can't think of them right now. I'm pretty sure I'll be more than satisfied with the kit. It will make more power than I will ever need, it looks good, is made well, aaaaaaaand.....it makes that cool 'whoooooshy' sound. lol j/k.

Damn Howard. I'm dying laughing over here.

P.T.S. Dominator Corvette C5 CUSTOMER: Austin Long ORDER# COMPONENTS Turbos (x2) Type: TE44 Blow off valve Type: Tial 50mm Wastegates (x2) Type: TurboSmart Street Gate Intercooler Type: Front mount PTK BOLT KIT Header Stud Kit (8mm x 1.25mm-25mm) (x16 ea.) Turbo Mount Bolt (3/8” bolt assembly) (x8) Wastegate Bolt (5/16 x 1 1/2” bolt assembly) (x4) Radiator Bolt (5/16 x 1 1/2” bolt assembly) (x4) Intercooler Bolts (5/16 x 1 1/2” bolt assembly) (x2) Down Pipe Bolts ( 3/8 x 3” bolt assembly) (x6) Overflow Tank Support Bolt (1/4” x 1” bolt assembly) Air Diverter Bolt (1/4” x 1” bolt assembly) (x4) Coil Pack Bolt ( 1/4” x 3/4” bolt assembly) (x4) TURBO PARTS KIT Oil Drain Plate & Gasket (x2) Oil Drain Plate Bolts, (small & large) (x4) 1/4” NPT to –4AN 90* (x2) 1/8” NPT to –4AN 90* -4AN 3-way brass “T” Vacuum “T”, 7/32” (x4) Oil Drain, 3/8” NPT to –10 AN (x2) Oil Drain, 1/2” NPT to –10 AN (x2) Oil Drain, -10 AN Hose End 45* Oil Drain, -10 AN Hose Ends 90* (x3) C5 Oil Feed Plate C5 Oil Feed Plate Gasket 02 Plug (x2) Water T fittings(w/ install diagram) V-BAND KIT 3” V-Band Clamp (x2) HOSE KIT Oil Drain Line, -10 Stainless (x21”) Oil Drain Line, -10 Stainless (x24”) Vacuum Line, 7/32” (96”) -4 Stainless line ( 17” long) -4 Stainless line ( 24” long) -4 Stainless line ( 36” long) HEAT WRAP KIT Turbo Blanket, TO4 (x2) Heat Blankets, 2 1/2” (x4) EXTRAS Alternator Air Filters (x2) Turbo Inlet Gasket, TO4 (x2) Safety Wire (96”) Plug Wires (x8) Instruction CD ACCESSORY ITEMS Upper Radiator relocation Bracket (x2) Lower Radiator relocation Bracket (x4) Coil Pack relocation bracket (x4) Radiator Overflow tank (3/8” NPT to 5/8” barb fitting) Radiator Overflow tank support bracket Power Steering Reservoir(w/90* barb) Windshield washer Reservoir (w/ 90* barb) Master Cylinder heat shield Upper Air diverter plate Lower Air diverter plate Steel radiator tubes (x2) ABS relocation bracket (2000 and newer) ALTERNATOR BRACKET KIT Alternator Relocation Bracket Kit (3 pc) 8mm x 70mm 10mm x 25mm 10mm x 30mm 10mm x 50mm 10mm x 90mm 10mm x 100mm 10mm Stover Nuts (x2) 10mm washers (x7) SILICONE HOSE KIT 1” Stainless Hose Clamps (x10) T- Bolt Upgrade >>>Check Below>>> 1 3/8” Stainless Hose Clamps (x6) 2” Stainless Hose Clamps (x8) 3 1/2” Stainless Hose Clamps (x3) 4” Stainless Hose Clamps (x2) 2” Silicone Hose (x4 ) 3 1/4” Silicone Hose (x1) 3 3/4” Silicone Hose (x1) 3 1/2” to 4” reducer 3” 90* Silicone Hose (x2) COLD PARTS Compressor Inlet Tube 1 Compressor Inlet Tube 2 Intercooler Tube 1 Intercooler Tube 2 Intercooler Tube 3 HOT PARTS Drivers Side Header Passenger Side Header Heat Shields (x2) Down Pipe Drivers side Down Pipe Passenger side Wastegate Dump Tube 1 Wastegate Dump Tube 2 NOTES Need to get Gates Belt # K060763(21mmx1955mm) ADDITIONAL OPTIONS SwainTech White Lightning coating on hot parts Black 2000* coating on exhaust housings Polished compressor housings E-Boost 2

Nope, not keeping the stock hood. I'm doing everything possible to keep the heat under control.

:grin2:

They claim one month turn-around normally. However, I opted to have them send my hot parts out to SwainTech for their white lightning coating. They said this will take an extra month. I'm in no hurry, I've got a ton of other things to do first, to prepare.

Try proturbokits.com They are damn quick at returning my emails, can't complain there. I've never heard a bad thing about them. I hope I'm not the first. I've got their address should the need arrise for me to go and chock somebody.

Tell me what you find interesting about this email: -----Original Message----- From: askproturbosystems@yahoo.com To: austinlong911@aol.com Sent: Thu, 30 Nov 2006 6:18 PM Subject: Re: Hey Dalton Hello Austin, The check did arrive today. And we will get started on your package. Thanks, Dalton Campbell Pro Turbo Systems.LLC That is all.

Zach! What the hell have you been up to?

19's???

With 500 whp, you'll be spinning badly from a 40 roll as well. Hate to burst your bubble.

dot

Satisfying, wasn't it?

WTF is wrong with those people?

lolololololololololololol *breathe* lolololololololololololololol

oh, I did some full-out research on her. Found all kinds of movies. I just laughed at that one when she admitted she was from Ohio.

Cavin, I thought your car was an '06?

http://www.galsparade.com/galls/tc/tbc/o2610m/mov/1.mpeg Wait for it.......

And another certain white Evo.... ....Which he got walked by.

Yep, after doing a bit of research, I found that. Thanks though.

Post this on the front page as it is the absolute truest thing ever posted on CR. Well said.