eBell

I've worn the same Wilderness belt for approx 9 years now. Everday. Went with the the version that has the plastic strip inside for additional support while shooting and moving when I did IPSC stuff years ago. Nice thing about them is the buckle can be used on another belt should your sizing needs change or the belt itself become damaged. This saves you a fair amount of money vs buying a complete belt again.

Excellent! Now I can drive down the road, do some plinking and swing by the Kenny Road Market for tasty adult beverages afterwards!

FYI: Mid-Ohio is listing this weekend as a spectator event. $10 to get in unless you state you're a driver, crew, family etc. Be creative and save $10.

I'll be up there doing track support for a customer running a Daytona Prototype in Super Unlimited and possibly lending a hand to my buddy with his freshly built Spec-E30. Weather looking kind of crappy and no rain tires for either car. Not sure that's a bad thing.

Two places that I know of that are legal and free for eBook downloads: The Baen Free Library: http://www.baen.com/library/ Project Gutenberg: http://www.gutenberg.org/wiki/Main_Page They may not have the newest offerings but they are an option.

9mm or 45ACP always works. Even 22lr will do. I used to run the pin event at Blackwing with my B.I.L. He still does, I opted out as they kind of pissed me off. We always liked to see folks using off the shelf, center-fire ammo of any caliber instead of handloaded bunny-farts as we tried to make the event use something more than point and shoot, square range skills. Not always a success. While the event is meant to be fun and relaxed (it really is) we viewed it as an opportunity to practice the basics. Target transitions from one side of the rack to the other, mandatory reloading, specific order of target engagement to force some brain activity etc. If you've never been to one I suggest giving it a go. As I stated, it's meant to be fun and the only real stress is what the shooter brings with them to the firing line. EDIT: Pin count will vary. Depends on the setup for that particular event. I don't recall ever having less than eight or nine.

My shop-mate has the following available. He says the seat is to small. I told him he's to big. Regardless, it's up for sale. Located in Powell. His typed up add below. Cobra Suzuka Pro seat with Cobra aluminum side mounts. This seat is FIA 8855-1999 approved and HANS compatible. I purchased it from a shop in FL where it was on display in their showroom and it was mounted briefly in my car (about 20 mins), but never used. The seat is too small for me. The seat retails for $750 and the side mounts retail for $145. Asking $650 for the seat and side rails. http://www.subesports.com/products/cat/Seats/brand/Cobra/prodID/650 Thank's for looking! -Eric

SOLD Lock this one up you like, she's got a new owner.

Thank's for bump man. Gun is now **SOLD PENDING FUNDS** Will update once transaction is completed.

My B.I.L. may have one. I've left him a message. Will update when I hear back from him.

SOLD is an HK Mk 23, date code KH. Not a safe queen as you can tell by the paint wear on the bbl. Asking for $1,350. This is a firm price at this time. Prefer FTF, I'm in Central Ohio and will travel a bit for the sale. Will ship to FFL. Buyer pays for shipping, FFL fee on their end and any shipping insurance they may want. Payment method of cash or USPS money order. Comes with: - Original camo bag. - 2 original 10 round magazines. - 2 lightly used twelve round magazines. - New spare firing pin. - New spare firing pin spring. - New-ish spare complete recoil assembly. Not listed as new as I've installed it and ran 100 rounds through the gun to see if I noticed a difference. Didn't. - HK thread protector. I've shot approx 600 rounds in this pistol. No idea on the number shot by previous owner. Bbl still looks new. Well, on the inside at least. First person to post "I'll take it" gets to spend their money. Note: This pistol is posted for sale elsewhere. I can be contacted me via I.M on this board.

OK, we'll call it "SOLD" even though it's still in my shop. If a meet and buy time can't be worked out with current buyer in the next few days I'll just put it back on the market. Thank's!

You can't even just swap slides. You're looking at several custom parts that aren't going to be real cheap, if even possible. And still left with getting a magazine to fit in the 19 frame that'll feed 45ACP. I suggest:: - Sell the 19 and buy a 45ACP variant. - Find someone with a 45ACP variant that wants to trade. It does happen. Or the best for your situation: Keep the 19 and enjoy the hell out of it and the easier to find and cheaper to purchase ammo.

SOLD PENDING FUNDS Will confirm on Weds the 24th. Ended up with this after a friends Uncle died. Don't need it so it's up for sale. Doesn't appear to have been used but since I can't state that for a fact it will be sold as gently used. Includes original box. Plugged it in and did it's thing. Also included are two unopened 6lb bags of polishing media. Picture bits: http://www.netwalk.com/~mrbell/Images/Tumbler/Tumbler01.jpg http://www.netwalk.com/~mrbell/Images/Tumbler/Tumbler02.jpg http://www.netwalk.com/~mrbell/Images/Tumbler/Tumbler03.jpg Asking $100 firm. Cash or USPS money order. Located in Central Ohio. Would prefer FTF and willing to travel a bit for a meet. First posted "I'll take it" gets to spend their money. NOTE: Also posted for sale on a local gun board. Contact through I.M. here. Thank's for looking! -Eric

She's got a new owner. Lock this one down if you'd like.

****SOLD PENDING FUNDS TO 1fast5gp*****

Hell man, you had a chance at Blackwing and passed! We need to get up there again sometime and show the targets who's boss. I've got the Gemtech running on my FAL's now. Very fun!

Well, I do like your car. Serious answer: No I'm not looking for trades. Cash money only please.

***SOLD***SOLD***SOLD*** Springfield Armory Socom for sale by original owner. Installed in Sage stock system shortly after purchase. http://www.netwalk.com/~mrbell/M1A/SageSocom.jpg Approx 2,500 rounds through it using South African and Australian bubble pack surplus with a handful of T.A.P. in the mix. Has a Smith Enterprise FSGL and tritium sight installed along with a Smith Enterprise short gas plug. Also have the Cali legal compensator but it's never been used. Included in sale: - Original stock, FSGL and factory pieces to install back in the factory stock. http://www.netwalk.com/~mrbell/M1A/MiscBits01.jpg - Stubby vert grip in picture. - Three 25 round CMI magazines. Function tested. - Five 20 round CMI magazines. Function tested. http://www.netwalk.com/~mrbell/M1A/CMI_Mags.jpg http://www.netwalk.com/~mrbell/M1A/CMI_Mags_Detail.jpg - Two 30 round magazines, manufacturer unknown. Function tested and surprisingly they work. http://www.netwalk.com/~mrbell/M1A/30roundMags.jpg - Four 20 round magazines, manufacturer unkown. Function tested. http://www.netwalk.com/~mrbell/M1A/Tested20rndMags.jpg - Six 20 round magazines, manufacturer unknown. NOT tested. http://www.netwalk.com/~mrbell/M1A/Misc20RndMags.jpg - One Springfield 10 round magaine. Function tested with T.A.P. - Troy Industries sling. http://www.netwalk.com/~mrbell/M1A/TroySling.jpg - Sage picatinny striper clip guide replacement. - Possibly the Sage fore grip, Kydex, taco shapped thingy, if it can be found. - Black Ergo-Grip pistol grip on the rifle and another that is Sage in color. http://www.netwalk.com/~mrbell/M1A/SpareGrip.jpg There may be other misc items included as I'm still searching. Ammo seen in magazines is NOT included. Asking $1,900 + shipping\Insurance if desired\FFL fee on buyer end. The price is firm. Payment via USPS money order or cash. Prefer face-to-face but will ship. Shipping will happen after funds have cleared. First "I'll take it" gets the first option to purchase. Post here and send me an IM. F.Y.I.- This is listed at a few places. If it sells at one of them I'll kill\update this add. I think that's it, will update if more items are found or more info needs added. Let me know if you have any questions and thank's for looking!

Negative on the Subby. #68 Charlie Foxtrot, 87 BMW 325i. The much hated E30. The majority of our team out voted me on following Mr. Lamms instructions about sending in proof that we'd ran in a LeMons event before. This is done to get a bit of credit on your car for making repairs without going over $500 during judging. The judge used this and the fact that it's an E30 as a club on our team and we would have been fooked if I hadn't thought ahead and brought a large bottle of Patron Anejo, a very large bottle of Titos vodka and a 12 pack of good beer. Of course I presented this as an appreciation of their efforts and not a bribe. We rolled out of judging with only a 5 lap penalty. Keeping our racing clean, taking it easy on the car and just clicking off the laps did the rest.

Damn, I need to visit here more. Didn't know you were up there as well. Feeling the same here minus the sick part thankfully. We were able to pull 2nd overall and first in class.:bangbang: Said class being "The Good". The other two "The Bad" and "The Ugly". We still don't know how the class thing is decided. Even after being on the track I have a hard time imagining 120-some cars running at the same time.

My brother-in-law has the pistol variant with a Gemtech can. Pretty damn hush, more so than my Oasis.

Sorry, no pics. Tried but they just don't turn out well despite mucking about with the camera settings. It is an interesting website. After seeing the output in person and checking the spec's on what's available my mind just starts thinking of all the poorly lit places a simple 9volt, On\Off switch and a few LED's could make so much better. EDIT: If you want you can come by our "shop" and see the Lemon LED bits. And perhaps have a beer and bullshit.

These folks might have some options for you. D.I.Y. as well as pre-made. http://www.superbrightleds.com/led_prods.htm We're using some of the WFLS (Waterproof Flexible Light Strip) and spots on our Lemon. The WFLS was still running, although not very bright, after 72hrs on a 9 volt battery.

Excellent news! Best of luck on the install. BTW- I've got that exact same engine stand!