LS_Sonoma

making of Fast Five?

We had what was called an Auto Hobby shop in the military which was basically the same terms. Ran very well. I think its a great idea. You would need a good tool inventory program though.

I dont see how. The answer is pretty clear to me...and Im a GM guy.

If that pole has been there for sixty years you think it would be covered under a grandfather clause. People used to get along... and she did just bold face lie to him.

Thats good stuff. My eight yr old and 10 yr old daughters have been driving me nuts to take them fishing. Its more like they fish and I untangle lines, take fish off and bait hooks.

dear baby Jesus!

Not a bad idea actually. I believe Moroso has a kit to put an electric BB chevy water pump on a LS engine now and they are significantly cheaper than a Meizer electric LS pump.

Drain your radiator, Pull the tensioner to releaser the belt. Metric size 10mm or 12mm bolt heads I believe for the pump bolts. Replace it with a WP for a LS2 corvette. The pulley has a shallower face and is far easier on the eyes. I wanna say those bolts are not torque to yield, so you are good there also.

very nice move on their part. they'll make some money off that one.

If he backs out, let me know. I'll give you ten bucks plus the ride to Indy unless you'll be at the dyno day on the 23rd of April.

Should be an inspection port on the trans somewhere IMO. You could look in to see if everything is covered in oil and go from there. After reading your post, it actually reads as if you are seeing a increase in RPM but the car does not accelerate accordingly or at the same rate. If you are sure the car is revving without moving Id say you are on the right track. If the car is revving without cause but moving accordingly, Id say you have an issue in your IAC, TPS or etc. Hope this helps.

I use flux core with a heat setting of 2 and a wire speed setting of 3on .032 wire. 1/8th" steel definetely needs to be pre heated with a torch. You welds look like the wire is being pushed hard, my welds look like that when the mig isnt set up correctly. Hope this helps.

I rented one as well a couple yers ago when they came out. Great vehicle, only problem I noticed was is there seemed to be a large blind spot for me over my left shoulder. Otherwise, great vehicle.

Heres an idea: Quit breaking the fucking law and do the speed limit or less.

Victoria Silvestead 1986 playmate of the year? no? no care.

This. I personally do the same thing except the $500 case part. I then turn the half and half coins back in. Ive got about ten banks I do this with. Its more for fun though. Personally I think that if cash goes to shit those bullets your buying are going to be the most valuable resource.

Very nice car. Why are you parking next to pink fire hydrants though?

Who makes the headers? Coming along very nicely.

Barnes and noble...Books a million etc.

Great mag coverage. one question though: Who produces your fuel line seperators? I cant find those anywhere and need about 7-10 of them. That posters getting framed and hung in the office with the last one they put out.

Chase Saphire.

thirdgen.org perhaps for the swap info.

I seen a 944 with some 18X8 and 18X9" wheels and some nice tires and it looked very good. Whatever you go with Id go for polished or silver.

Does it come complete with a ridiculous tattoo of an ice cream cone on my face performed by my own eight yr old daughter? Then yeah.

Dr. Dre drinks Gatorade. Thats all I need to know.