LS_Sonoma

They're not power but I have a pair of black cloth front seats out of a DC Integra. In great shape. I'd take $50 for the pair.

 

 

-Mike

 

Shoot me a pic if you can Mike.

Im looking for a set of sports car type bucket seats for my Sonoma build. Preferably in great shape and black or dark grey leather. Power a plus also.

 

Thanks

Sometimes a header flange can be slightly warped, but the only way to tell is to removed it and test it with a machinist straight edge. My BBK's would loosen over time, this was before locking header bolts. I'd try some of those Stage 8 locking bolts or there are some that have a set screw in the middle that when tightened spreads the outside bolt. Try the cheapest first...could be a gasket too, if the manifold was left loose and the exhaust has been allowed to burn the gasket.

 

Hope this helps.

I wonder how that would do on my gravel driveway.

 

It would grade your driveway also!

The amish are some of the best carpenters/homebuilders in the country. Obviously very honest as well.

 

I'm also a big fan of their "Shunning" technique, which can be used anywhere from ex-girlfriends to family members.

 

We have several Amish crews here in the Fort. Honestly, they are no better than the mexican crews that build houses. Same quality and speed. They provide alot of the contract work to your average cookie cutter house builders.

 

We have almost decided that we will use our previous home builder (Granite Ridge) again. Thanks everyone for you opinions and experiences.

http://www.columbusracing.com/forums/search.php?searchid=1104230

 

 

Thanks!

 

Any negatives out there?

Anyone have any experience with this builder? I'd like to consider them for our next home.

 

Thanks in advance.

I now officially hate someone. That collection is ridiculous. Anyone know where an 1981 Camaro is in good shape?

You're powder coater does good work.

sounds amazing Id love to hear it at full tilt.

Depends on if they're fingers are pruny or not...

Is this car from Texas?

LS6 parts should fit, the back is just blocked off that's what I have on my car

 

Ive been told that the routing is different due to the LS6 bottom being flat.

*Parts Purchased*

 

please close.

 

Thanks

In high school I smarted off to a guy standing in front of me for lunch. He turned around and popped me in the upper lip, I fell and blacked out for a good 10 seconds. He was very apologetic for the rest of high school. Unfortunately I hold grudges pretty bad.

 

I will stab him 20 times.

Have any pics?

Women get lazy when they get pregnant, X2 on prego exercise. Stock up on cloth diapers to use as burp cloths.

 

This.

 

Im in, how about a completion date of July 4th?

Depending on your family situation, I would consider the size. After renting one for a week, (2009 model) the interior seemed very small. I rented the CTS4 which had plenty of power and the AWD was very nice. The navigation, heated seats and all of the gadgets made the car very "neat". Seating wasnt that comfortable if the car was driven for more than a couple of hours. Im 6' 165lbs wet...Just my .02 cents.

 

Hope this helps.

What casting number are the heads? I.E. 241, 853 or 243? Should be stamped on a upper corner.

Thanks.

My 99 Sonoma is going to be built to handle, just not so srsly. I'm using AFX G-Body spindle, C5 brakes. Bell Tech lowering components and Sway bars for a 3/5 drop. In the rear I'm gonna use Caltracs for traction and a pan hard bar with more C5 brakes. It think it can only get better by using coil overs. Poly bushings through out.

Lay some pipe, like in a garage or home floor, and use geothermal pumping stations to supply the temperature difference. Problem solved.

Made by PRW for 3/8" hardened pushrods. New never used and hardened. Set of 8. $30 includes shipping and pay-pal fees. Here's a link:

http://www.prwonlinestore.com/gmls1-1.aspx

 

Thanks

I would make fun of this situation but my fear of Karma prohibits it.

watergate then pumpkin pie then pecan pie