PsychoticGaming

Not that I have ever been in, does not appear to have been that I have noticed when I instelled the FMIC. Front bumper cover is cracked but I have a good red one for it.

1G Auto trans/tcase/spare center diff/rear diff & axles/shifter (no cable)/tcu/spare OD clutch set, shifted fine when pulled 3yrs ago $550

Price bump

Congrats! Awesome to step into something already going and working out for you! Look forward to finding some good BBQ!

Wifi? Or do you need a cable? I run the Netgear PL1000 to my shop 200' away and works very well, Internet over powerline. Sender in the house and the receiver in the shop broadcasts wifi out but also has a port on the side of it so you can run an ethernet cable from.

Offers? Tried FB.... That was aweful to say the least.

Runs and drives, 159k on the body, 25k on 6 bolt engine (Ross/Eagle combo, Arp mains, L19 head studs, Toga trimetals, BSE, 1mm oversized valves, dks 272, BC springs) - machining was done by M&M. FIAV/ISC delete (cold blooded), N/T TB, Punishment racing FMIC, header, 3" exhaust. Ebay b16g rebuilt, stock 450's and maf. VR4 trans, XTD stage 4 unsprung, Fidanza flywheel, ball joints, tie rods, wheel bearings replaced in the past couple years, manual steering. Battery relocated to the trunk and GC coilovers. Not perfect, body needs some work, drove her as a DD for 9 years and at least once a week the past year. Will need tires. $2500

She's looking good! Where's the dyno vid?

Oh, that's Nice! Looking good!

Keen boots, hands down. 10-12hrs everyday on concrete. I've tried almost every brand, for the price, the best option.

Most likely the crossover has corroded and started to leak, sometimes you get lucky and its just the o-ring but being in Ohio....

If they decide to part, let me know on the exhaust.

I haven't been to NL for years since my uncle use to run there. Seems as though it has alot of hate any more?.... Though I hear the new pavement is nice. Mid-Ohio I ran last year for the first time and was really nice (it's also only a 25min drive too so...) Looked at Pitt but it is a good drive too, comparable to Mid-Ohio or? Auto Interests HPDE Novice is pretty good for first time on a track and getting ti know your car. Of course you'll just end up pushing it more and more

For all these events I'm still surprised Nelson Ledges doesn't have more going on this year...

265/65-18 Half treads, some uneven wear. $100, trade for?

Odds of her making it out is slim, just rebuilt a 16g and put on my 92 to get her going. Sold the red 91, may sell the 92 as I bought a 90 Galant GSX and have a forged engine on the stand to drop in (now to decide between e316g or the 70mm t4....) Odds are the PoorVette will be out on the track instead, although I wouldn't mind screaming around in the Talon at 35psi and the 70mm turbo

Thanks for for sharing! Looks like Street Car Takeover is the same day I'm planning on Nelson Ledges, figures.

Price Bump!

Anyone have info on 2018 track days? (Mid-Ohio / Nelson Ledges / ect) I see Auto Interests has some, any other events in the works?

1999 Dodge 1500 with a 24V Cummins swap. Engine/Trans/Tcase/Axles out of a 2002 (191k on Engine/drivetrain). Within the last 10k: NV4500 with SB3600 DD with upgraded input shaft and upgraded master / slave cylinders RV275 Injectors HE351CW Turbo Aftermarket IC Boots BHAF Boost and EGT gauges 5" lift (springs, shocks, blocks, leaf, ect) U-Joints Front driveshaft Raptor 150 pump Water pump, hoses and thermostat Steering linkage (latest upgraded factory revision) SBB 4" exhaust (6" tip) Front/Rear diff/Tcase/Trans fluid changed Quad ADR Sport headlights Both batteries Cow Catcher Bumper (Oil well pipe) Might be forgetting other stuff at this point Runs and drives good, shifts fine, 4x4 works as it should (CAD delete). Tires are 60% tread (315/75/16E Cooper ST/Maxx - speedo is off ~4mph). Passenger seat is a different color, drivers seat has a tear, dash is toast, aftermarket radio, headliner is falling, doors have rust, drivers rear door doesn't open (has a newer handle, linkage doesn't stay on), body is very solid (from Florida a couple years ago front fender is dented as it came that way). Flatbed is rusty. The truck isn't perfect but has always done well. I don't drive her that much, I don't need the diesel any more as nice as it is to have. $7,500 obo May consider partial trade with cash for a 4x4 3/4 ton 6.0l Suburban, 67-69 Camaro project, 68-72 Nova project.

Thought's on just using an Evo8 ecu and EcuFlash/EvoScan? A cheaper option with tunability.

Sportsmans Den in Mansfield usually has a 22LR for $120.... I'm sure someone in Cbus surely has that deal.

Pics? Sent from my SM-G930V using Tapatalk

Sorry to hear of your loss. Sent from my SM-G930V using Tapatalk

Found some, lock it up! Thanks! Sent from my SM-G930V using Tapatalk