Jump to content

mjrsplat

Members
  • Posts

    1,044
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by mjrsplat

  1. I'm not sure what brand of plugs you are using, but with Ngk plugs 6 is the stock heat range for the jz motors. If the plugs you pulled were 7 heat range they were colder plugs. FWIW I had 8 heat range ngk's in my 1j gapped down to .022 and it was good for High boost on a big single setup. Also if you're running copper plugs, keep in mind they don't live long in jz motors, I used to change mine every 5k miles. Hope this helps.
  2. No wonder your old lady bangs other dudes.

    You seem to have trouble following even the simplest of instructions.

     

    Going by your logic, your lady is one of 3 in this thread that's unfaithful? Sorry for you, I feel your pain. It's time you move on, you'll feel better once it's in the past.

  3. 5 years? No, you should only be allowed to have 1 kid while on welfare and it has to be within the 1st year. After 2 years, mandatory abortion and then after 3 years sterilization.

     

    So you're advocating population control through mandatory abortion? That's probably the best solution. "We could just cut off your assistance and force you to work and pay your own bills, but instead we're just going to kill your unborn children for the next year and then sterilize you."

     

    :dumb:

  4. we believe this to be true... or she told him he was not allowed to be involed in such situation... with this in mind i did not order the midget stripper like i originally planned. he doesnt have to worry about that

    poor Luap.

     

     

    so you're passing out goody bags at midnight? I just assumed strippers were the preferred party favor of a bachelor party.

  5. So.. Just for the record, Did Luap make the mistake of telling his beloved testicle guardian there was going to be strippers at the party? That's the only reason I can forsee not wanting to be there. That or if Phil railed out your baby's mom

     

     

    :gabe:

×
×
  • Create New...