Sully

Well, it wasn't the battery. I was driving the car today sitting in traffic enjoying the a/c, then all of a sudden it switch to hot air. I read something about turning the dial to hot, then very slowly, one click at a time, turning it back to cold. I did this and the air gets cold for about 20 seconds, then goes back to blowing warm air again. I did this several times and it did the same thing each time. Knowing this, what should I be looking at now?

Oddly enough, the battery in my car died yesterday. The battery was only 2 years old. When I took it out of the car to have it tested, we noticed a decent bulge on the side of the battery. It was replaced free of charge, but now i'm wondering if this could have somehow been linked to the A/C not working intermittently. Maybe the battery was too weak at times to allow the A/C to work. I could be way off base, but perhaps wishful thinking. I haven't had to run the air yet this week, but I'll be checking it occasionally.

Thanks for the replies so far. I read something about the blend doors and module being the most likely culprit on these cars with this issue. This latest instance was Tuesday evening. Since then, the A/C has been fine. I have a feeling the compressor and charge are ok. I believe the least expensive thing to check is the blend doors, but at this point, I have no clue how to go about checking or replacing those.

Need some a/c help please. On my 2012 Fusion, the a/c has started crapping out. I don’t use it much but do especially when it’s raining. Recently, after starting my car, the a/c usually works but sometimes it just blows hot air. I’ve been able to shut the car off and turn it back on and it’s fine. Yesterday When it was raining I left work the AC was working fine, stopped at a store, went in got a few items, came back out and started the car. The AC worked for about five seconds and then changed to hot air. I tried shutting the car off and restarting it several times and it would do the same thing. This morning get in the car started drive to work and have a Sue the entire time. Anybody have any ideas as to what could be causing this?

And she's claiming that she told other assistant coach's wives as well. You think all of them never said anything to their husbands? This is going to get real ugly.

A buddy of mine that works down there says it's a mad-house right now. He was just asked to leave the area and has seen Gene Smith come and go as well as a lot of other people.

He got the insurance company to pay for my roof. My neighbor's was replaced due to hail damage. My insurance company didn't want to pay for it, but he worked hard to make it happen.

In the video he posted about it, he said he's going to be coming to the dealership soon. Would be cool to meet him in person.

Yes, they are AA batteries. There is a light indicator on the camera that will turn red, i think, to indicate low battery. Also, if you run the app on your phone, you'll get notified there when the batteries are low.

The wife needed a protective lens and case for her phone, so I added those to my 3-camera Blink XT system order. When I went to checkout, Amazon offered me $60 off my order if I apply for their credit card and get approved. Even with the extras for the wife, cost was $220. However, it looks like I won't get my camera system for about a month.

Amazon Prime Day has started. Is there anything you have been watching and waiting for the price to drop? What are you buying? I've been wanting some sort of security system for my house, but there's so many obstacles. Power for the cameras, cost of the equipment, cost for cloud service, etc. I saw these a couple weeks ago. Figured I'd wait until Prime Day to see if the price dropped. Sure enough, went from $130 per unit, to $75 for 1 camera with receiver. It's $85 per additional camera (which doesn't make sense, really). Or you can buy a 5-camera kit for $tree fiddy. True, these aren't as powerful as a system with wired power, but I think they'll be good enough for what I'm wanting to accomplish. https://www.amazon.com/Blink-Home-Security-Detection-Included/dp/B06XZWHBJ4/ref=pd_ybh_a_2?_encoding=UTF8&refRID=3XAAZCYYR36JACFYQDVN&th=1

Sometimes typing/talking things out helps. I removed the quotes from the batch script. It works now. Geesh. What a PITA! This is why I'm not a programmer.

Nope... still stops at a full screen command prompt at: C:\ I don't know why it's not launching IE.

Just realized i need \desktop\ after skhrkiosk. Ugh. Trying again...

There were so many problems with the workstation, I ended up resetting it and starting over. Now that I have it reconfigured, I've added the script, but it stops at a command prompt at C:\Windows\System32 This is my batch file: @echo off taskkill /F /IM explorer.exe start /max "C:\Users\skhrkiosk\iexplore.exe -k" I then threw in the cd\ after the taskkill, so it looked like this: @echo off taskkill /F /IM explorer.exe cd\ start /max "C:\Users\skhrkiosk\iexplore.exe -k" Now it just stops at a command prompt windows at C:\ Why is it not starting IE?

And after a couple reboots, the logon script is no longer working. There were no changes to the script. All I did was reboot the workstation.

Ha! Nevermind. Figured it out.

I'm not a programmer by any means and have no clue when it comes to this stuff. I edited an existing script to put the taskkill command in there. When the computer boots up, all I get is a black screen. I'm assuming it's because I don't have any other commands after it. I just wanted to see what it would do. I need IE to launch in Kiosk mode. How would I do that? TIA!

There are scripts already in place. I'll have to look into modifying them. Thanks.

Ugh. I had this enabled, but missed the drop-down box on the left side to choose to fully disable it. It doesn't show it in the link you provided though. Just happen to see it on my workstation. Now that I'm at work and looking at it, there's more I need to lock down. Will most likely need to do the startup script deal.

I've been configuring a workstation at work that will run a browser in kiosk mode. I'm using a GPO on the server to control some items, but have hit a bit of a roadblock. The workstation is Windows 10. In kiosk mode, the task bar will still appear on the screen. I want the task bar locked down so that the only button on the left side is the power button. The date/time, wifi, etc will all still appear on the right. I just don't want the users being able to open any of the apps in the "start menu". I can't seem to get rid of the "all apps" button. Anyone know which option(s) that would be in the GPO? OR Is there any way to get rid of the task bar completely or maybe put a fake overlay in its place? Any other ideas or suggestions? TIA!!

Cherokee. I hate this effing POS. So many issues. Some people have had to have the BJ's replaced under 36K. I tried to talk my wife out of it before we bought it. Having owned a Dodge truck in the past, I know how terrible this brand is. It's what she wanted and I couldn't even talk her into looking at anything else. The transmission sucks. The gas mileage sucks. It's cramped inside. The engine knocks like it's diesel. I would pay someone to steal this piece of shit and burn it.

I was asking because of the redesign of the knuckle.

Yeah, this is what I've read on the forums. It's almost $400 for the knuckle assembly and then I guess there's a nut that they say should be replaced and it's like an extra $5 just for that. I presume that if you're replacing 1 knuckle, you have to replace the other one. I wonder if there are any better aftermarket knuckles out there that wouldn't be as expensive or maybe the same amount, but would be better. If I go the route of replacing the knuckle, is this something I can do at home, or are there special tools needed to do this too?

Wife's 2014 Jeep Cherokee... Apparently, now the front right ball joint is bad. Been doing some reading on it. Some say the entire knuckle needs to be replaced. Some say the ball joint can be replaced, but is pressed in, but the knuckle has to be removed anyway. Supposedly there's a ball joint press tool that can be rented from the auto store. Then, will the jeep need an alignment afterward? I wouldn't think so, but I've read some say that it's needed. I sure wish the chilton or haynes repair manual were available for this car. I'm going to need it. Anyone have experience with ball joints on 14+ cherokees?