Jump to content

2006 zx14 front brake pulsating


Doomking

Recommended Posts

Hello
I just noticed that when I come to a stop at slow speed the brakes are "pulsing" like the rotor might be warped, however at any other speed say over 20 mph up to 100 plus, the brake feels solid with no pulsating feeling whatsoever, so to speak.
So if the rotors were warped wouldn't it pulsate at any speed? Why only at slow speed when I come to a stop light?
Also I have no feed back of any kind to the brake lever just a "pumping " motion of the forks as I come to a stop.
Pads look in good shape as well as the rotors from a visual inspection.
Should I replace pads first see if it cures it or replace rotors?
Any idea?
Thanks for the help.

Link to comment
Share on other sites

Could be warped rotors--many big heavy superbikes are susceptible to overheating their rotors if subjected to high speed stops--but it might be something as simple as a rough, dirty or corroded spot on one or both rotors.  Before you commit to spending $$$ on new parts, try using some brake cleaner and a fiberglass or copper scouring pad to thoroughly clean the surface of both rotors.  Some folks use steel wool, but I've heard you can get some residue left from the steel pads that will create rust on the rotor surface.

Link to comment
Share on other sites

Checked the rotors and they are clean.

buttons are all stuck with no play.. I am bit confused here. Is the rotor supposed to be floating on those buttons? In other words should I have any kind of play when I try to push the buttons or spinning it?

right now both rotors have those round buttons all firmly attached to the rotors both sides.

 

Link to comment
Share on other sites

4 hours ago, Doomking said:

Checked the rotors and they are clean.

buttons are all stuck with no play.. I am bit confused here. Is the rotor supposed to be floating on those buttons? In other words should I have any kind of play when I try to push the buttons or spinning it?

right now both rotors have those round buttons all firmly attached to the rotors both sides.

 

A longtime geek mechanix trick is to find  bolt and nut that will fit in the hole in the buttons and tighten them up and rotate nut/bolt/button combo with socket wrench. Clean the shit out of it with brake cleaner. 

- Those buttons are supposed to be moveable..... 

Edited by mello dude
  • Beer 1
Link to comment
Share on other sites

15 hours ago, Doomking said:

Checked the rotors and they are clean.

buttons are all stuck with no play.. I am bit confused here. Is the rotor supposed to be floating on those buttons? In other words should I have any kind of play when I try to push the buttons or spinning it?

right now both rotors have those round buttons all firmly attached to the rotors both sides.

 

Just to clarify, the buttons should be free so you have movement of the rotor side to side. That lets the rotor float so it centers in between the brake pads.  There should be no rotational movement.

Link to comment
Share on other sites

Heat will make a difference too.  If the rotor seems to have a little movement when cold, it will tighten up firm once hot from use.....so check them cold.   I had an '08 ZX14 for about 7 years.  The stock front rotors blued from heavy braking, but never had an issue with pulsation like your talking about....even after 24k miles and a few trackdays on sintered padsets. 

For starters, I'd put the bike on stands, pull the front fender for a clear view, and watch how it behaves while you spin the front wheel by hand.....maybe have a friend slowly pull the lever a few times while it's spinning too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...