Jump to content

Rabbit's 2017 TOR Yamaha R6 race build


TwiztedRabbit

Recommended Posts

19 hours ago, wolfeman28 said:

REM polishing is so under-rated. There really is no downside to it as when it's done correctly, your parts come back at the same size they were sent (unlike classic polishing that will shave everything down a bit). It's dirt cheap too. Last time I sent in a transmission everything got done for $60. I think they just take the small stuff and throw it in along with other customers big parts.

100% correct.  Small things like this plus a revised shifter pivot location along side a properly modified slipper clutch and Translogic quick shifter and auto blip will make a bike like this run through the gearbox like a dream.  It really is incredible the difference it all makes.

 

Link to comment
Share on other sites

This weekend was a busy one, spent the time working on not 1, but 3 2017 Yamaha R6. Mostly getting the bike peeped for many of the hard parts.

From suspension carts and install, safety wire, harness and line routing. The details matter in making the bike perform well and crash better.  Every thing we do before hand is to speed up maintenance and repair. Seconds matter in between races be it changing a tire , fork or shock springs. Making adjustments.  Or repairing damage.

20180209_151055.jpg

20180209_152332.jpg

20180209_211711.jpg

20180209_220438.jpg

20180209_231444.jpg

20180209_231434.jpg

20180210_160750.jpg

20180210_160812.jpg

  • Upvote 2
Link to comment
Share on other sites

Shocked you didnt mention your freshly powder coated rims!  The short list of installed items include clip ons, rear sets, grips, toe gaurds, sprocket, Ohlins steering damper, ABS  electrical block off, ignition switch by pass, braided front and rear lines, and a few other odds and ends.  In addition, the wire harnesses for the Translogic quick shift/auto blip systems were prepped for install when motor is ready.  

Link to comment
Share on other sites

On ‎2‎/‎14‎/‎2018 at 5:25 AM, TwiztedRabbit said:

Guys if ya didn't figure it out,  hah.  Blake is a Turn One Racing employee. He is a major apart of this build. And generally can answer most of the technical questions quicker amd mpre accurately than I can. 

You forgot handsome

Link to comment
Share on other sites

  • 1 month later...

so this has sadly been put on the back burner for a bit while the race season has really crept up on us... we will be  sorting through the  100's of pics and  getting info together buuuut....

 Paul of 614PaintWorx kills it again

Flake for days !!!!!

 

20180413_174318.jpg

20180413_174408.jpg

20180413_174413.jpg

20180413_174518.jpg

  • Like 1
  • Beer 1
Link to comment
Share on other sites

  • 1 month later...
  • Casper unpinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...