The Blake Face Posted February 13, 2018 Report Share Posted February 13, 2018 My major concern with this build is the rider wont show the bikes true potential So what are you waiting on for updates? I know there was a lot accomplished in last few days. 1 1 Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 13, 2018 Author Report Share Posted February 13, 2018 Buwahaha, though possibly accurate... Blake is just jelly it isn't his bike... But correct we did get a lot done this last weekend Quote Link to comment Share on other sites More sharing options...
The Blake Face Posted February 13, 2018 Report Share Posted February 13, 2018 Jelly? I've seen your lap times, lets reserve that for a time its actually called for. Quote Link to comment Share on other sites More sharing options...
The Blake Face Posted February 13, 2018 Report Share Posted February 13, 2018 19 hours ago, wolfeman28 said: REM polishing is so under-rated. There really is no downside to it as when it's done correctly, your parts come back at the same size they were sent (unlike classic polishing that will shave everything down a bit). It's dirt cheap too. Last time I sent in a transmission everything got done for $60. I think they just take the small stuff and throw it in along with other customers big parts. 100% correct. Small things like this plus a revised shifter pivot location along side a properly modified slipper clutch and Translogic quick shifter and auto blip will make a bike like this run through the gearbox like a dream. It really is incredible the difference it all makes. Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 13, 2018 Author Report Share Posted February 13, 2018 13 minutes ago, The Blake Face said: Jelly? I've seen your lap times, lets reserve that for a time its actually called for. Damn going for the jugular already, I thought we were boys Quote Link to comment Share on other sites More sharing options...
The Blake Face Posted February 13, 2018 Report Share Posted February 13, 2018 Just now, TwiztedRabbit said: Damn going for the jugular already, I thought we were boys that actually means you are one of the boys. with friends like these.... Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 13, 2018 Author Report Share Posted February 13, 2018 Touche' but hey man you better watch that rear wheel I'm coming up fast Quote Link to comment Share on other sites More sharing options...
The Blake Face Posted February 13, 2018 Report Share Posted February 13, 2018 you have no idea how much I look forward to that 1 Quote Link to comment Share on other sites More sharing options...
TimTheAzn Posted February 13, 2018 Report Share Posted February 13, 2018 How long have you two been dating? 1 1 Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 14, 2018 Author Report Share Posted February 14, 2018 2 hours ago, TimTheAzn said: How long have you two been dating? you jelly timmy? could have just told me your concerns but we don't date... it's an open relationship Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 14, 2018 Author Report Share Posted February 14, 2018 This weekend was a busy one, spent the time working on not 1, but 3 2017 Yamaha R6. Mostly getting the bike peeped for many of the hard parts. From suspension carts and install, safety wire, harness and line routing. The details matter in making the bike perform well and crash better. Every thing we do before hand is to speed up maintenance and repair. Seconds matter in between races be it changing a tire , fork or shock springs. Making adjustments. Or repairing damage. 2 Quote Link to comment Share on other sites More sharing options...
The Blake Face Posted February 14, 2018 Report Share Posted February 14, 2018 Shocked you didnt mention your freshly powder coated rims! The short list of installed items include clip ons, rear sets, grips, toe gaurds, sprocket, Ohlins steering damper, ABS electrical block off, ignition switch by pass, braided front and rear lines, and a few other odds and ends. In addition, the wire harnesses for the Translogic quick shift/auto blip systems were prepped for install when motor is ready. Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 14, 2018 Author Report Share Posted February 14, 2018 Guys if ya didn't figure it out, hah. Blake is a Turn One Racing employee. He is a major apart of this build. And generally can answer most of the technical questions quicker amd mpre accurately than I can. 1 Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 14, 2018 Author Report Share Posted February 14, 2018 But oh yes my freshly coated wheels. In a color I am designating volcano red. in the Sun it's hot red and orange, and in normal light it's deep rich red. much like a volcanoes "magma" 1 Quote Link to comment Share on other sites More sharing options...
The Blake Face Posted February 15, 2018 Report Share Posted February 15, 2018 On 2/14/2018 at 5:25 AM, TwiztedRabbit said: Guys if ya didn't figure it out, hah. Blake is a Turn One Racing employee. He is a major apart of this build. And generally can answer most of the technical questions quicker amd mpre accurately than I can. You forgot handsome Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted February 21, 2018 Author Report Share Posted February 21, 2018 Armour Bodies fairings finally arrived. We will be getting these to Ohio riders own Paul Finn, so he can work his magic. 1 Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted April 14, 2018 Author Report Share Posted April 14, 2018 so this has sadly been put on the back burner for a bit while the race season has really crept up on us... we will be sorting through the 100's of pics and getting info together buuuut.... Paul of 614PaintWorx kills it again Flake for days !!!!! 1 1 Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted April 15, 2018 Report Share Posted April 15, 2018 Paul killed it once again! Badass 1 Quote Link to comment Share on other sites More sharing options...
TimTheAzn Posted June 7, 2018 Report Share Posted June 7, 2018 Paging @TwiztedRabbit for those of you that aren't facebook friends with him. He's got the goods and they are finished and he forgot about us. Quote Link to comment Share on other sites More sharing options...
TwiztedRabbit Posted June 7, 2018 Author Report Share Posted June 7, 2018 buwahaha haven't forgotten to busy enjoying it. more to come.. wow that sounds familiar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.