Alex1647545498 Posted January 28, 2006 Report Share Posted January 28, 2006 So yeah, I'm enlisting some labor since I've never ran wires for an amp with facotry radio setup. I want to retain the factory radio because of the cd/tape... really I want to keep the tape function. Car is a 99 cr-v and I just need the audio and power wires run to the back of the car. I figured that the remote wire will go into the fuse for the radio but audo I'm not too sure of. So if you're an installer or have done this I will pay fair labor. I'm on 3rd shift so going to a store and picking it up before they close is kinda hard. Especially when places closes early on sundays. I can come to you or you can come over to do it. Let me know. Thanks! Quote Link to comment Share on other sites More sharing options...
wnaplay1647545503 Posted January 28, 2006 Report Share Posted January 28, 2006 Come over I've put a few in. Quote Link to comment Share on other sites More sharing options...
cNeutron Posted January 28, 2006 Report Share Posted January 28, 2006 You need a line output converter. They are around 20 bucks and give your factory radio RCAs. Also make sure you use your firewall to put the power wire through. Creates a much cleaner install and also doesnt create problems for the future. Say for instance running it through the door and the wire is pinched and exposed. Take it through the driver side panels on crvs are pretty easy to get off. Just look for screws if their are any. Quote Link to comment Share on other sites More sharing options...
Adam Posted January 29, 2006 Report Share Posted January 29, 2006 Alex call me later I might know of a guy who can do it if he is willing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.