Jump to content

Alot of stuff for sale Look , Chevy , GM , Ford


Guest 614Streets

Recommended Posts

Guest 614Streets

I need to get rid of this stuff so , go to http://www.putfile.com/614streets/images/130051

 

Everything except PIC_0616 , PIC_0611 , PIC_0609 , PIC_0614 , PIC_0619

is a lot sale for $80

 

Read carefully , $80.00 included is , new edelbrock dual carb feed line , barely used 5.0 mustang tranny cross memeber , 16 1.6 roller tip sbc rocker arms , includes nuts to use 12 on GM iron head 60 degree v6 2.8 3.1 3.4 , big spool of .030 mig wire cambell hausfield , spectre throttle bracket used , new moroso quick disconnect for sbc starter , new mcord sbc head gaskets , Wade front and rear black outs off a 99 mustang cobra CLIP ON no velcro , New jegs line lock , Moroso sbc windage tray , boost gauge , 3.1 v6 gm crank , 5.0 chrome valve covers ford , used hammer dents on one not affect valvetrain , wiper motor reman unit for 75 nova should interchange with tons of older gm vehicles , one ford ranger tail lens was new has been sitting around , sbc starter bought from jc whitney in 90's used on early sbc build but removed may or may not work??? , polished sbc swivel water neck , sbc pass side dip stick chrome , OEM gm 2.8 tbi vin r s10 unit works fine , 69 camaro 75-79 nova also fits many other sbc vechiles including trucks flowtech headers used for an early sbc build removed and have flash rust of them , 1 oem 75 nova upper control arm , 2 oem 1992 s10 oem control arms

, 1 accel hei supercoil with new cap , 7 black new sbc wires , 6 moroso 11mm garden hose wires , temp gauge sunpro used etc , poly front eye leaf spring bushings for 75 nova should fit a ton of gm including x bodys , f bodys etc etc also rear shackle bushings for same in rubber new , Supra fuel pump new , couple passes used fram drag racing fuel filter , used oem 8.5 ten bolt diff cover , as is guys

 

Also pictured and for sale built turbo 350 built by metro transmissions on agler rd long time ago heavy duty inertia race 2nd gear , red line modulator shift kit very hard shifts , still full auto have reciept from build. $350 firm , 6 inch tail shaft , chevy pattern bell

 

 

Fageol 71 cubic inch roots blower universal fits best up to 3 liters can be fabricated to any engine paid $1000 to have rebuilt with new 4340 gears , new rotos end caps etc only case is original when I sent it in , can use any vortech blower pully on keyed snout , $400

 

New lift off 4" us body fiberglass racing cowl hood fits 75-79 gm x body nova

$200! Its new....

 

614 946 5424 - Will

Link to comment
Share on other sites

Guest 614Streets
take 20 for it...still a good $80 lot there..

 

 

(you edited , so did i)

 

 

Welp Id like to get rid of the whole lot in one swipe but I will consider it let me see if anyone wants the whole lot for 80 if not then I will gladly split it up.

Link to comment
Share on other sites

Guest 614Streets
take $20 for the new jegs line lock kit and chrome valve covers? the line lock is nib i assume?

 

 

It came on the typical jegs cardboard and vacuumed sealed platic card but was removed from that , it is brand new though never used. Im really open to selling it with the offers but let me just wait a day to see if anyone wants it all , if not i am spliting it up and yes i will agree to that.

Link to comment
Share on other sites

Guest Wunna Dig Race
read it dumby...he said nothing over a 3 liter. :rolleyes:

 

The reason I asked is because the one in the pictures in his link is on a sbc duh rob

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...