Jump to content

FS: 1986 Firdbird Trans Am 350 Carb'd/A4 90k Original Miles Lots of pics!


Chadz89GTA
 Share

Recommended Posts

$1,800

 

Up for sale is my 1986 WS6 Trans Am. Originally a 305 Computer Controlled Carb car it has been switched over completely to vac advance and a 4 Bolt main 75cc headed 350 last 3 digits on the block are 010. Highrise intake with a Quadrajet Carb.

I'll list mods to it after I post a few pictures.

http://img148.imageshack.us/img148/3821/carpics002wg4.th.jpghttp://img170.imageshack.us/img170/8408/carpics003us7.th.jpghttp://img341.imageshack.us/img341/9388/carpics004xr2.th.jpghttp://img139.imageshack.us/img139/184/carpics005fg8.th.jpghttp://img513.imageshack.us/img513/9020/carpics006rp6.th.jpghttp://img210.imageshack.us/img210/6112/carpics007nt5.th.jpghttp://img513.imageshack.us/img513/1963/transampics008aq3.th.jpg

 

More images located here: http://www.dayton-fbody.com/DFBAbb/viewtopic.php?p=22359#22359

 

Mods are:

Rebuilt 350 4 bolt main 010 block with 75cc heads

Highrise Performer Q-Jet intake with Q-Jet carb

Hooker shorty style headers with CUSTOM 3inch exhaust and Magnaflow Muffler, the Y-Pipe was custom made has no cats on it and is VERY loud when the Cut-Out I had put on it is open.

Upgraded suspension *see below

Everything electrical has been throroughly checked and replaced.

MP3 CD Player with new dash/rear speakers.

 

It will NOT be sold with the GTA wheels or tires. It will have these stock rims on it with decent tires: http://www.tacreationsusa.com/images/Wheels/8586TA.jpg

If you would like the GTA rims tack on $500 to the total.

 

These are things that have been replaced with new items since I've owned the car and have less then 3,000 miles on them. I purchased the car with 87,467 miles on the odo:

New suspension all the way around that is new shocks/struts/swaybar links. Car has brand new silverstar headlights as well as every marker light/tail light replaced. New tranny mount as the one that was in it was shot. The paint is a typical 22 year old paintjob and could use a little attention. There is VERY VERY light surface rust starting but nothing you couldn't fix with a little elbow grease. The only two bad things about this car are it's going to need brakes in the near future, the brakes that are on it now are NOT bad they just don't respond as well as you would have on a newer car. It's going to need a carb, the carb that is on it needs rebuilt badly. The car starts and runs fine, it just runs VERY VERY rich. It has a posi 2.77 9bolt borg warner rearend in it. I have the option code sheet, it is infact a WS6 car, if you would like a copy of it let me know I can PM you the options as my camera keeps blurring it up. Sorry for this being lenghthy I'm just trying to give you a very good idea of this car and what I've done to it. I don't want to sell the car but if you see my sig...I've put myself in debt so this baby has to go. THIS CAR WILL RUN AND DRIVE ANYWHERE!!!! IT RUNS FINE NOW!!! It just gets VERY VERY poor gas mileage.

 

If you have any questions please PM me.

 

Thanks!!

Link to comment
Share on other sites

Could you get up some engine bay/interior pics? I'm interested.

 

If you follow this link here: http://www.dayton-fbody.com/DFBAbb/viewtopic.php?p=22359#22359 You will find all the pictures of the engine bay that you need. The interior shots will be taken when the snow goes away. I've owned 3 3rdgens, and this is by far the CLEANEST interior I have ever seen in one. No tears in the seats, no real signs of wear ANYWHERE, dash pad is immaculate. The only problem I had with the interior when I bought the car was a busted radio pod, but I ebayed a better one so thats what resides in the car at this present time. The only real wear is the center console lid is pulling up a bit there are no cracks in it, and the console sides need reglued. If those 2 things were excluded from a rating I'd give it a 9 of 10 easy. It's the cleanest 86 I've ever seen. With a paintjob this would easily be one of the nicest 3rds on the road.

Link to comment
Share on other sites

GTA wheels? Corvette wheels?

 

What about them? The car will sell with the wheels that are posted above which are stock factory 16inch 4 Slats, the wheels have a front offset as well as a rear offset and take a 245/50/16 inch tire. The rims has NO curb rash and only need a good polishing to look A+ again. The Vette/GTA rims are for sale in the Parts section thread that I posted.

Link to comment
Share on other sites

They are vette wheels not GTA...

 

Free bump I used to have one.

 

If you use the Dayton link here http://www.dayton-fbody.com/DFBAbb/viewtopic.php?p=22359#22359 you'll see there are also GTA wheels on the car. I've had many sets of wheels on the car. So yes, I know the difference in the wheels. GTA's are cross laced and the sawblades are vette. Thus the reason I posted that the wheels that will sell with car are the ones pictured, and NOT the ones that are in the pictures with the car.

Link to comment
Share on other sites

  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...