Turbotrio Posted April 23, 2009 Report Share Posted April 23, 2009 This sale is good for any current CR member. $350 for any '89-04 car/truck that we will burn a custom chip for. For an additional $50 you can upgrade to a dual-map switch that will allow you to swap back and forth between tunes from inside the vehicle. $450 for any '99+ car/truck and will include a Predator programmer. Both include tuning and dyno-time on our AWD DynoJet. Please contact Mike or Eric at the shop to schedule at: 614-444-5884 or send an email to: sales@ipsmotorsports.net You can also PM me on here as well. Jeff Quote Link to comment Share on other sites More sharing options...
Rustlestiltskin Posted April 23, 2009 Report Share Posted April 23, 2009 Hey I sent mr wright a pm regarding vw parts. could you or him get back to me please? thanks Quote Link to comment Share on other sites More sharing options...
ODoyle Posted April 23, 2009 Report Share Posted April 23, 2009 Hey I sent mr wright a pm regarding vw parts. could you or him get back to me please? thanks Call them,they will answer. Quote Link to comment Share on other sites More sharing options...
Rustlestiltskin Posted April 23, 2009 Report Share Posted April 23, 2009 Call them' date='they will answer.[/quote'] shouldn't have to if i've sent him numerous PM's and its obvious he's been online and posting today Quote Link to comment Share on other sites More sharing options...
Turbotrio Posted April 23, 2009 Author Report Share Posted April 23, 2009 Hey I sent mr wright a pm regarding vw parts. could you or him get back to me please? thanks Email me at: sales@ipsmotorsports.net and I will make sure somebody gets right back to you Quote Link to comment Share on other sites More sharing options...
Dr. Apex Posted April 23, 2009 Report Share Posted April 23, 2009 Anyone have $350 to loan me?? Sounds like a great deal!! Quote Link to comment Share on other sites More sharing options...
Trouble Maker Posted April 23, 2009 Report Share Posted April 23, 2009 Didn't know you got a mustang Ben, congrats! Now you just need to move down to Grove City. Quote Link to comment Share on other sites More sharing options...
Turbotrio Posted April 23, 2009 Author Report Share Posted April 23, 2009 Anyone have $350 to loan me?? Sounds like a great deal!! It is Quote Link to comment Share on other sites More sharing options...
Rustlestiltskin Posted April 23, 2009 Report Share Posted April 23, 2009 Email me at: sales@ipsmotorsports.net and I will make sure somebody gets right back to you You have email:cool: Quote Link to comment Share on other sites More sharing options...
Qtr_pndr Posted April 23, 2009 Report Share Posted April 23, 2009 carb cars included? Quote Link to comment Share on other sites More sharing options...
Evolved8 Posted April 23, 2009 Report Share Posted April 23, 2009 thats a smokin deal jeff. Ill try to send some ford guys your way Quote Link to comment Share on other sites More sharing options...
Turbotrio Posted April 23, 2009 Author Report Share Posted April 23, 2009 carb cars included? Yes. Quote Link to comment Share on other sites More sharing options...
Dr. Apex Posted April 24, 2009 Report Share Posted April 24, 2009 Didn't know you got a mustang Ben, congrats! Now you just need to move down to Grove City. Your sooooo funny Jesse!!! Been waiting to get some pics of it since it's practically a cardinal sin on this board to post about a new car without pics. I'd love to get the car chipped but have some other things to come first that Jeff is trying to find me. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted April 24, 2009 Report Share Posted April 24, 2009 carb cars included? Yes. does that include jetting (main and emulsion jets)squirters and what not? how much experiance do you have with thru blow thru set-up's? Quote Link to comment Share on other sites More sharing options...
alibies Posted April 24, 2009 Report Share Posted April 24, 2009 that for any ford motor cars? like... mazda? Quote Link to comment Share on other sites More sharing options...
Guest Hal Posted April 24, 2009 Report Share Posted April 24, 2009 that for any ford motor cars? like... mazda? I don't want to speak for the Diablo Sport stuff too much but, in general the PCM is different. Quote Link to comment Share on other sites More sharing options...
Turbotrio Posted April 24, 2009 Author Report Share Posted April 24, 2009 does that include jetting (main and emulsion jets)squirters and what not? how much experiance do you have with thru blow thru set-up's? Tommy says he has been adjusting carburetor's since he was 3 and he doubts much has changed in the last couple decades Jeff Quote Link to comment Share on other sites More sharing options...
Rustlestiltskin Posted April 24, 2009 Report Share Posted April 24, 2009 Tommy says he has been adjusting carburetor's since he was 3 and he doubts much has changed in the last couple decades Jeff I emailed you my cell #. hit me up Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted April 25, 2009 Report Share Posted April 25, 2009 I don't want to speak for the Diablo Sport stuff too much but, in general the PCM is different. Hal is correct. but you can socket the ecu and burn chips for it like most other obd1 and obd0 ecu's Tommy says he has been adjusting carburetor's since he was 3 and he doubts much has changed in the last couple decades Jeff Ok i ask you a serious question and I get a Jr high response. Thanks. I'll look else where for a dyno. Quote Link to comment Share on other sites More sharing options...
Brandon Posted April 26, 2009 Report Share Posted April 26, 2009 Hal is correct. but you can socket the ecu and burn chips for it like most other obd1 and obd0 ecu's Ok i ask you a serious question and I get a Jr high response. Thanks. I'll look else where for a dyno. Honestly its some what the truth is it not Rob? Carb's are nothing new, and there are not a lot of new innovative ways to tune them. we are not talking VVT, cam phasers, EFI type innovations here. We do not knock them by any means, look at Matts truck for example, carb, and its hauling, and we worked on it Why don't you do this... Come down to the shop, I will tour you are around our 9500 sq ft buildings, and you can meet all of us and realize we are very professional, and intelligent, and are not in Jr. High, then you may have a different idea or what our business is. Brandon Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted April 26, 2009 Report Share Posted April 26, 2009 Honestly its some what the truth is it not Rob? Carb's are nothing new, and there are not a lot of new innovative ways to tune them. we are not talking VVT, cam phasers, EFI type innovations here. We do not knock them by any means, look at Matts truck for example, carb, and its hauling, and we worked on it Why don't you do this... Come down to the shop, I will tour you are around our 9500 sq ft buildings, and you can meet all of us and realize we are very professional, and intelligent, and are not in Jr. High, then you may have a different idea or what our business is. Brandon No there's nothing new about fuel mixers. tons of new tech coming out every day on blow thru stuff tho. and for draw thru for that matter. didnt you guys just build the headers? now you are calming to built the carb and tuned it? And just the way you guys act on here, is enough for me not to care to know any of you or your business. not one thing you guys do or have done impress's me one bit. Quote Link to comment Share on other sites More sharing options...
Rustlestiltskin Posted April 26, 2009 Report Share Posted April 26, 2009 http://smiliesftw.com/x/inoutugh.gif Quote Link to comment Share on other sites More sharing options...
Trouble Maker Posted April 26, 2009 Report Share Posted April 26, 2009 And just the way you guys act on here, is enough for me not to care to know any of you or your business. not one thing you guys do or have done impress's me one bit. Rob, By this point, I'm not proponent of IPS (and I have used them a few times), but if this was already your opinion, why in the fuck did you post in this thread asking about this service/sale? Just so you could say that. Then why not just come out and say it? Quote Link to comment Share on other sites More sharing options...
Nate1647545505 Posted April 26, 2009 Report Share Posted April 26, 2009 What software is being used? Quote Link to comment Share on other sites More sharing options...
Miller Posted April 26, 2009 Report Share Posted April 26, 2009 Tempting. What if someone already has a flip bank chip in their ford? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.