Jump to content

Everything Must go Thread


rb26deet32

Recommended Posts

Selling everything. All prices are OBO.

 

First up the big things.

 

1992 honda civid eg hatch: $2,000 OBO

Completely stripped down, integra seats, eg dash board, 6 point roll cage, no idea on the mileage. Car has a clean title with no accidents. No body damage, dents or rust. Has ground control coil overs, gsr front brakes, rear disc swap, braided brake lines, manual steering rack and that's about it.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic1.jpg?t=1306622685

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic2.jpg?t=1306622713

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic3.jpg?t=1306622731

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic4.jpg?t=1306622797

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic5.jpg?t=1306622809

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic6.jpg?t=1306622822

 

Drag DR 31 15" 4-100/4-104 wheels with 205/60/15 bfg gforce tires: $650 OBO

 

Wheels and tires have less than 1,000 miles on them. No curbs or scratches.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/civic7.jpg?t=1306622847

 

B18b1 short block: $2,000

 

The block is still being put together. Has cp 9.0:1 pistons, block guard, all new oem bearings, itr water pump, oil pump, bored to 81.5mm. Polished crank, line honed. Planned on making 5-600whp with this motor. All work was done by Moore Speed Performance and Fowlers machining. No pictures now but I will put some up when I get the block back.

 

B18c GSR head: $2,000 OBO

 

Has a stage 3 port and polish, supertech valve, valve springs, retainers, keepers. Comes with a valve cover and vtec solenoid and all the random fittings and plugs. Comes with all original cam caps/plates but does not come with any cams or cam gears. Has never been bolted up to a motor. All work was done at Slowmotion Motorsports. Head was going to be use on my built block when I get it back.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gsr4.jpg?t=1306622885

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gsr3.jpg?t=1306622914

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gsr2.jpg?t=1306622928

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gsr1.jpg?t=1306622940

 

B18b1 long block: $450 OBO

 

Mileage is in the mid 60's. Motor is completely stock. came out of a running car.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/b18b2.jpg?t=1306622981

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/b18b1.jpg?t=1306622995

 

 

B18b1 ls Transmission: $500 OBO

 

Rebuilt less than 100 miles ago. Replaced all syncros, gaskets and seals and also had an ITR lsd installed. Shifts like butter. Hydro trans btw.

 

http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/ass.jpg?t=1306623617

Link to comment
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

B16a2 block: $100 OBO

 

Comes with all crank caps and crank shaft. The block is whats left after doing a poor man itr. Motor has no more than 40,000 miles on it. All bearings are good, crank is clean.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/b16a21.jpg?t=1306623109

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/b16a22.jpg?t=1306623129

 

Aeromotive 11104 1,400 hp fuel pump: $450 OBO

 

Is still brand new. Was installed on a car but never had fuel ran through it since the car was never finished.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/fuel3.jpg?t=1306623158

 

Aeromotive fuel pump controller: $250 OBO

 

Just like the pump, it is brand new. Has never even been hooked up.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/fuel2.jpg?t=1306623175

 

Walbro 255 fuel pump: $75 OBO

 

Has never been used. Still in original wraper/packaging.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/fuel5.jpg?t=1306623195

 

Precision 1,000 injectors: $200 OBO

 

Had them in my car for a few thousand miles. Made 448whp using them on pump gas. All have top and bottom o rings.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/fuel7.jpg?t=1306623229

 

Aeromotive A1000 FPR: $150 OBO

 

Has been used on my last car. Does not come with a gauge. Works great.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/Fuel1.jpg?t=1306623252

 

Black nylon braided fuel lines: $500 OBO

 

-10 feed, -8 return with most of the fittings you will need. Also has two shorter -8 lines with fittings.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/fuel6.jpg?t=1306623269

 

Precision SC6176s journal bearing turbo: $500 OBO

 

Was maybe 1,000 miles on it. I made 448whp on a built bottom end ls.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/turbo2.jpg?t=1306623294

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/turbo1.jpg?t=1306623311

 

Neukin mini ram manifold: $500 OBO

 

Very good design, great quality, no cracks or problems with it ever.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/turbo1.jpg?t=1306623311

 

Down pipe and straight pipe for eg civic: $200 OBO

 

3" v banded down pipe with 3" straight pipe. The down pipe matches the neukin manifold.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/exhaust1.jpg?t=1306623369

 

Precision 46mm wastegate: $350OBO

 

Has at most 100 miles on it. Comes with 5 or 6 springs ranging from 3.5psi up to almost 30 psi. Does not come with a dump tube.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/wastegate.jpg?t=1306623430

 

Tial 50mm bov: $200 OBO

 

Has a few thousand miles on it.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/TialBoV.jpg?t=1306623448

 

B18b1 Skunk II intake manifold: $200 OBO

 

Comes with a fuel rail, plugs and throttle body. Is the newer design.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/IMSkunk.jpg?t=1306623499

Link to comment
Share on other sites

B18b1 oem intake manifold: $25obo

 

Completely stock manifold, comes with fuel rail, plugs and throttle body.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/IMoem.jpg?t=1306623519

 

B18b1 ls head: $25 OBO

 

Completely stock except for cam seal. Has about 45k miles on it.

 

http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_1728.jpg?t=1306623684

 

Hasport b series into eg civic motor mounts: $300 OBO

 

U94a Compound. Has never been used. Not a solid mount but it's as close you can get to being solid without going with a complete solid mount.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/mount3.jpg?t=1306623713

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/mount2.jpg?t=1306623725

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/mount1.jpg?t=1306623742

 

ACT Stage 5 clutch/pressure plate: $400 OBO

 

Has 1,824 total miles on it. Was broken in for 500 miles, has never been launched. Any pull that was ever done was a highway roll. Was never taken to the track. Most power it has ever seen was 448whp/346wtq.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/clutch.jpg?t=1306623764

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/flywheel2.jpg?t=1306623787

 

Honda oem B18b1 starter: $125 OBO

 

Worked great for as long as I drove the car.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/starter.jpg?t=1306623893

 

B18b1 honda alternator: $100 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/alternator3.jpg?t=1306623830

 

Also worked great. Was taken off while motor was being built.

 

HF Manifold/adapter plate: $50

 

Manifold works on any d16 motor. Adapter plate works with t25, 14b and 16 g turbos.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/exhaust2.jpg?t=1306623917

 

DSM SMIC: $50

 

oem dsm smic.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/dsmsmic.jpg?t=1306623937

 

2 B18b1 oem flywheels: $100 OBO each

 

One has 1,824 miles on it and is still basically brand new after the resurface. The other one has a few thousand miles on it.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/flywheel1.jpg?t=1306623954

 

Fuel pressure regulator thing...: $50

 

I've never used it, nor do I know how to use it. I guess you can use it to tune your car.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/fuel4.jpg?t=1306623978

 

B18b1 axles and mid shafts: $100 per set

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/axles2.jpg?t=1306624001

 

4,500lb engine hoist: $350 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/hoistjacks.jpg?t=1306624030

Link to comment
Share on other sites

4 wheel engine stand: $100 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/enginestand.jpg?t=1306624048

 

Random b series radiator hoses: $10 OBO per

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/radiatorhose.jpg?t=1306624066

 

Gauges: $50 OBO per

A/F

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gaugeaf.jpg?t=1306624084

 

Oil pressure x2

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gaugeoil.jpg?t=1306624101

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gaugeoil2.jpg?t=1306624116

 

Boost

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/gaugeboost.jpg?t=1306624132

 

B18b1 OBD1 Dizzy with wires: $100 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/dizzy1.jpg?t=1306624156

 

B18b1 Oil pan, oil pick up: $50

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/oilpan.jpg?t=1306625047

 

B18b1 OBD1 Dizzy with msds cap/rotor/NGK Wires: $200 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/dizzy2.jpg?t=1306624168

 

MSDS External Coil: $50 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_1542.jpg?t=1306624208

 

Braided turbo feed line: $20 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/turbofeed.jpg?t=1306624283

 

P06 ECU: $100 OBO

Completely stock

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/ecu1.jpg?t=1306624303

 

S300 chipped P28 ECU: $600 OBO

Currently has only a base tune on it. Will include Hondata cd and usb cable.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/ecu2.jpg?t=1306624329

 

BBK 70mm TB: $175 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/bbktb.jpg?t=1306624356

 

Contour SVT cams/cam gears: $200 OBO

 

No scratches or scuffs.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/svtcams.jpg?t=1306624796

Link to comment
Share on other sites

MSDS headers and high flow y pipe. $400 OBO

 

Nothing has ever been installed. Just bought it a few weeks ago and has been sitting in a box.

 

Trubendz single exit rear muffler exhaust: $650

 

Stainless steel. Still brand new, never installed. Has an aeroturbine muffler. Also come with a high flow cat and flex pipe. None of the cougar stuff has ever been installed.

 

http://i35.photobucket.com/albums/d153/rb26deet32/FS%20Pictures/b16a22.jpg?t=1306624898

 

Arp Head stubs for b18b1: $75OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_1740.jpg?t=1306624944

 

Supertech Valves for b18: $200 OBO

 

http://i35.photobucket.com/albums/d153/rb26deet32/92%20EG%20Build/IMG_1739.jpg?t=1306624969

 

And last but not least a Beretta M9A1 with 3 magazines: $600 OBO

 

This is not my gun but it is the exact same thing.

 

http://www.berettausa.com/assets/item/gunlarge/M9A1.jpg

 

That's it for now. If you want to buy anything just let me know. Everything is OBO so don't be affraid to low ball.

 

The best way to contact me is to just send me a message on here. Thanks.

Edited by rb26deet32
Link to comment
Share on other sites

SC6176s- PENDING

Shell w/out wheels- PENDING

Neukin manifold- PENDING

down pipe- PENDING

Injectors- PENDING

LS long block- PENDING

precision wg- PENDING

 

That's all for now. But money talks. If you have money and want some parts let me know.

Link to comment
Share on other sites

Hey man my brother who is in Kandahar Afghanistan told me about a civic hatch shell that he wanted me to take a look at. And now I see your post. My brother is really interested... Send me a PM mang.
Link to comment
Share on other sites

texted you twice... is it a call only phone?

 

Yea, that's my house phone. My cell took a shit. And I just got new house phones so the answering machine wasn't set up yet. Call me at that number any time and you should be able to leave a message now. Let me know.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...