Jump to content

HELP!!! 1 1/4" id Fuel Hose


99FLHRCI
 Share

Recommended Posts

I need 1 ft. of 1 1/4" id fuel hose. This goes between the fuel filler down tube and the inlet to the fuel tank on a '98 Ford Escort SOHC. It is perfectly straight so bulk is fine. I have tried Ford (obsolete), Advanced, AutoZone, Napa, O'Rielly's, JEG's, PepBoys and International Auto. Any suggestions?
Link to comment
Share on other sites

well, are you asking for fuel line, or a filler neck? Sometimes they don't understand what you mean.

 

It is technically a filler hose. The filler neck is steel and I have a new one. To go from the neck to the tank requires 1 foot of filler hose.

Link to comment
Share on other sites

Call dave at oreillys in Westerville I almost positive you can get on goodyear's website and they list a part number for it...im on my phone or is get it for you

 

I found a goodyear part number but it was a 30' stretch and cost $522. I will call him in the morning.

Link to comment
Share on other sites

are you sure its not 1.5? i just typed filler neck hose on napas site and got these numbers for 1.5

http://partimages.genpt.com/thumbs/305437.jpgGas Filler Neck Hose, 1.5"

Product Line: http://partimages.genpt.com/partimages/1130291.gif NAPA Belts & Hoses

Select To Compare NBH 1030

 

http://partimages.genpt.com/thumbs/520377.jpgGas Filler Neck Hose, 1.5"

Product Line: http://partimages.genpt.com/partimages/1130291.gif NAPA Belts & Hoses

Select To Compare NBH 1031

 

http://partimages.genpt.com/thumbs/520378.jpgGas Filler Neck Hose, 1.5"

Product Line: http://partimages.genpt.com/partimages/1130291.gif NAPA Belts & Hoses

Select To Compare

Edited by TurboRust
Link to comment
Share on other sites

are you sure its not 1.5? i just typed filler neck hose on napas site and got these numbers for 1.5

http://partimages.genpt.com/thumbs/305437.jpgGas Filler Neck Hose, 1.5"

Product Line: http://partimages.genpt.com/partimages/1130291.gif NAPA Belts & Hoses

Select To Compare NBH 1030

 

http://partimages.genpt.com/thumbs/520377.jpgGas Filler Neck Hose, 1.5"

Product Line: http://partimages.genpt.com/partimages/1130291.gif NAPA Belts & Hoses

Select To Compare NBH 1031

 

http://partimages.genpt.com/thumbs/520378.jpgGas Filler Neck Hose, 1.5"

Product Line: http://partimages.genpt.com/partimages/1130291.gif NAPA Belts & Hoses

Select To Compare

 

 

 

Yep, I am sure. I measured the tank and the fill neck and the old hose. The old hose is just a little over because it was bloated from rust. The tank and fill neck are just a little under 1 1/4". That is why I am having so much trouble.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...