Jump to content

Awfulcanawful

Members
 View Profile  See their activity

  • Posts

    93

  • Joined

  • Last visited

 Content Type 

Everything posted by Awfulcanawful

  1. Awfulcanawful
    I like the eioc method. I think you may be letting the intake valve come up too far before you adjust the exhaust. I wait until the intake valve JUST starts to close. This should cover any crazy cam overaps. For me it is faster and it will work on any engine reguardless of firing order or cam overlap.
  2. Awfulcanawful
    Body came off..... that is easy....... why are the back tires 3 feet off the ground?
  3. Awfulcanawful
    How much do you think you should pay for the services she received?
  4. Awfulcanawful
    So that engine is turning 28,000rpm if the valves are going 14K? or is the engine spinning 14K. impressive either way!
  5. Awfulcanawful
    Sold 15 min after posting here! Thanks!
  6. Awfulcanawful

    sold

    Awfulcanawful posted a topic in LBTS GLWS

    $600 it runs and drives. 190000mi. v-8 http://img27.imageshack.us/img27/1305/jeep2f.jpg http://img10.imageshack.us/img10/7348/jeepaq.jpg
  7. Awfulcanawful
    Cool Runnings
  8. Awfulcanawful
    Can someone explain the delta vs. wye config? Either in physics or practical use? I am just starting to mess with this three phase thing and want to know the difference. Does the voltage make a diff? We deal in 208/240/480can I tell from that? and would I be able to differentiate the two with a meter at the wall plug?
  9. Awfulcanawful
    Mark Twain was there..... crying.
  10. Awfulcanawful
    Why does a nitrous motor need more ring gap? Expansion from all the heat so fast? Just curious what happens in there.
  11. Awfulcanawful
    Install new plug with locktite on it. If it works you win.. If it blows out again you didnt lose anything.
  12. Awfulcanawful
    Wow.
  13. Awfulcanawful
    Can i say that i called that?
  14. Awfulcanawful
    how did you verify ground? if it starts when on crossmember but not bolted to block that is my first guess.
  15. Awfulcanawful
    According to the flow chart dogs must always be on a leash? Is that your point?
  16. Awfulcanawful
    Word I got was his truck got robbed and had to quit.
  17. Awfulcanawful
    coolant line will not work.
  18. Awfulcanawful
    Its takes 100psi for an engine to run well..... so I would have to say your crank to cam timing is off....the compression had to be there when you started....
  19. Awfulcanawful
    DO NOT BUY A RYOBI. Had one for two years and had to adjust carb every other use just to keep it running nothing but a headache.
  20. Awfulcanawful
    It wont start if it is less than 40F and not plugged in.
  21. Awfulcanawful
    If they didn't change all the plugs they probably left that one in for a reason and you may be in for a real headache getting it out.
  22. Awfulcanawful
    I think you meant to say amp draw...... if he puts his meter in parallel like that on voltage it will blow the fuse in the meter. You have to switch the leads and setting to amps to do this.
  23. Awfulcanawful
    Code 1345 Had the same thing on my truck fought it for months ended up being the dist. gear was worn razor sharp.....Pull the dist and check it..... Needed a scanner to reset the timing to 0 but cleared up the running problem for me.
  24. Awfulcanawful
    found a break in the pink wire #139 thanks a million!!!!!!!!!!!!!!!!!
  25. Awfulcanawful
    Can anyone hook me up with the turn signal circuit schematic for a 1996 chevy 1500 pickup??? My signals quit working..... new flasher new switch no blown fuses or anything have power to fuses but dont know what wire power up the switch....... any help would be appreciated.
×
×
  • Create New...