Jump to content

2003 Yukon 5.3 idle


Clifford Automotive
 Share

Recommended Posts

Recent service to vehicle was plugs, wires, air filter, oil, trans flush. Was unable to do fuel filter due to my disconnect tool missing.

 

The problem was only at cold start UPS before idling at 400-450, a blip of the throttle would cure it.

 

Now when driving and stopping at a light, the truck will idle down to 400-450.

 

Any help, TIA.

Link to comment
Share on other sites

Without seeing the data on whats happening, things I would check are gap on the plugs which I assume are correct if you checked it. Verify a good seal at the MAF since you had the lid off. Double check your trans fluid level, could be starving the converter. Any issues before the service that you know of?
Link to comment
Share on other sites

It figures all this is happening right before Im leaving for a trip. Cleaned the MAF and nothing, tranny levels fine.

 

I did the spray through while running method to clean the TB but got nothing out of it. I guess Ill be pulling.

 

I should add, Amy drove it this morning when she ran out, and said it stalled on her.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...