Das Borgen Posted October 8, 2012 Report Share Posted October 8, 2012 (edited) Hey guys, long story short: my car was running like crap and bank 1 was misfiring dug into it, bank 1 was out time, no bent valves headgasket looked blown between a water jacket and cylinder but only ever so slightly but I still wanna check trueness and compression please recommend me a machine shop. I would prefer something on the west side of town hopefully. Plain City? Dublin? Powell? I think those locations are longshots. I know Performance Research in Westerville is very good but they are a little bit spendy. They've done work for me before and I was extremely pleased with the turnaround, quality, and the awesome customer's truck that was outside the shop when I went to pick up my last job for them. thanks for any suggestions Edited October 8, 2012 by das borgen Quote Link to comment Share on other sites More sharing options...
NHRATA Posted October 8, 2012 Report Share Posted October 8, 2012 Central Ohio Engine on Essex ave behind Jegs on 11th 294-3767 Quote Link to comment Share on other sites More sharing options...
Cordell Posted October 8, 2012 Report Share Posted October 8, 2012 Heard great things about M&M in Delaware. I used Phillips Racing with disappointing customer service. Quote Link to comment Share on other sites More sharing options...
Das Borgen Posted October 8, 2012 Author Report Share Posted October 8, 2012 Heard great things about M&M in Delaware. this one? http://www.ohiobiz.com/central-ohio/M-M-Head-Svc.html Quote Link to comment Share on other sites More sharing options...
Das Borgen Posted October 8, 2012 Author Report Share Posted October 8, 2012 Central Ohio Engine on Essex ave behind Jegs on 11th 294-3767 gotcha Quote Link to comment Share on other sites More sharing options...
zeitgeist57 Posted October 8, 2012 Report Share Posted October 8, 2012 Mike at M&M did a great job with my ford. I know it's no aluminum Bimmer, but he milled the head of my inline-6 just fine. It's the 36/37 exit off of rt23 north... Quote Link to comment Share on other sites More sharing options...
TurboNova Posted October 8, 2012 Report Share Posted October 8, 2012 Mike rush at m&m. Is the only way to go Quote Link to comment Share on other sites More sharing options...
Buckeye1647545503 Posted October 8, 2012 Report Share Posted October 8, 2012 Napa is a good option for Oe machine work Quote Link to comment Share on other sites More sharing options...
boosted98gst Posted October 8, 2012 Report Share Posted October 8, 2012 Mike rush at m&m Quote Link to comment Share on other sites More sharing options...
Nickey4271647545519 Posted October 8, 2012 Report Share Posted October 8, 2012 Central Ohio Engine on Essex ave behind Jegs on 11th 294-3767 Who I'd go with in/around columbus. I personally wouldn't recommend m&m to anyone. Quote Link to comment Share on other sites More sharing options...
STEVE-O Posted October 8, 2012 Report Share Posted October 8, 2012 carquest can also do it Quote Link to comment Share on other sites More sharing options...
351mach11647545510 Posted October 8, 2012 Report Share Posted October 8, 2012 I personally wouldn't recommend m&m to anyone. Care to elaborate? Quote Link to comment Share on other sites More sharing options...
KennyFKINPowerz Posted October 8, 2012 Report Share Posted October 8, 2012 I have been sending stuff to M&M for close to 20 years. M&M all the way. I have used a lot of Machine Shops in the Cbus area and M&M is the only shop who has never screwed anything of mine up. Quote Link to comment Share on other sites More sharing options...
Das Borgen Posted October 8, 2012 Author Report Share Posted October 8, 2012 Who I'd go with in/around columbus. I personally wouldn't recommend m&m to anyone. why not Nickey? Quote Link to comment Share on other sites More sharing options...
Nickey4271647545519 Posted October 8, 2012 Report Share Posted October 8, 2012 Care to elaborate? why not Nickey? I dont like dirty machine shops, shit gets lost in dirty/unorganized shops. They put together a Buick 455 for a friend of mine a few years back and some how they managed to put all the pistons in backwards. Quote Link to comment Share on other sites More sharing options...
Das Borgen Posted October 8, 2012 Author Report Share Posted October 8, 2012 I dont like dirty machine shops, shit gets lost in dirty/unorganized shops. They put together a Buick 455 for a friend of mine a few years back and some how they managed to put all the pistons in backwards. I can see where/why that's a concern for you. Sometimes, that's part of the madness of some people. Organized chaos, if you will call it so. But in the grand scheme of things, that's a fairly minor quip I think my mind is made up for M&M thanks CR I honestly appreciate the guidance Quote Link to comment Share on other sites More sharing options...
pontiacfreak142 Posted October 8, 2012 Report Share Posted October 8, 2012 Yep m&m all the way. Quote Link to comment Share on other sites More sharing options...
gbracing81 Posted October 8, 2012 Report Share Posted October 8, 2012 Yep m&m all the way. Just gotta make sure they do the all of the machining you request of them, right Gary. They did do a good job porting your heads. Quote Link to comment Share on other sites More sharing options...
blurtoyou Posted October 8, 2012 Report Share Posted October 8, 2012 Jerrys on south high have done all my machine work. They have good pricing to. 6144434681 Quote Link to comment Share on other sites More sharing options...
Das Borgen Posted October 17, 2012 Author Report Share Posted October 17, 2012 M&M was very cool with me direct quick enough cheap very nice peoples the shop was a mess, yes but I can't complain for the price and service I received would DEFINITELY use again I mean $110/head for pressure checking, crack checking, checking trueness and then actually miling and some cleaning? Yes, please Thanks CR! Quote Link to comment Share on other sites More sharing options...
GTPSS Posted October 17, 2012 Report Share Posted October 17, 2012 M&M just rebuilt my LSx 416 stroker. So far no issues and it starts!!! Reasonably priced, the timeframe could have been a little quicker-some of that was my fault for ordering the wrong piston rings 3 times (he had it for a month before he discovered they were wrong) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.