FocusDave01 Posted April 15, 2009 Report Share Posted April 15, 2009 well there she is all torn apart on middletowns floor...mad props to them for bustin their @ss's looks like either a) motor wasnt broke in correctly b)bad oil who knows but look at the head and valves both sides (inside and out) got crud and grime all over them so im sure thats the source of the problem..there gonna measure the valves and valve seals piston rings but pretty much new everything seal wise and spark plugs...more to come as i find out... Quote Link to comment Share on other sites More sharing options...
that dude Posted April 15, 2009 Report Share Posted April 15, 2009 somone needs to combine these 3 threads which are bascially the same info/post/ Quote Link to comment Share on other sites More sharing options...
KillJoy Posted April 15, 2009 Report Share Posted April 15, 2009 What impact did allergies have on this failure?KillJoy Quote Link to comment Share on other sites More sharing options...
justin0469 Posted April 15, 2009 Report Share Posted April 15, 2009 someone needs to find that chick in your avatar and get a pic of her exposed boobies Quote Link to comment Share on other sites More sharing options...
max power Posted April 15, 2009 Report Share Posted April 15, 2009 That looks expensive. Quote Link to comment Share on other sites More sharing options...
Disclaimer Posted April 15, 2009 Report Share Posted April 15, 2009 (edited) somone needs to combine these 3 threads which are bascially the same info/post/Seriously. It's one thing to postwhore as a noob - we're semi-tolerant of that, but you've STARTED like 5-6 threads to keep us informed on the bike. it's hard to keep track of everything.One would've been sufficient.Edit: Neg rep left = "not even a moderator yet whines and bitches like one...GTFO" -That is priceless and of course, unsigned. Edited April 15, 2009 by JRMMiii Quote Link to comment Share on other sites More sharing options...
natedogg624 Posted April 15, 2009 Report Share Posted April 15, 2009 send that top end off to reuben he'll treat you real nice. Quote Link to comment Share on other sites More sharing options...
cbr600f3 Posted April 15, 2009 Report Share Posted April 15, 2009 I don't know anything about that shop, but id be nervous after seeing that motor being all over the floor like that... not very professional IMO. Not something id attempt or get away with at the shop i work at either. But hopefully they will get it fixed up and running for you:D Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted April 15, 2009 Author Report Share Posted April 15, 2009 (edited) Seriously. It's one thing to postwhore as a noob - we're semi-tolerant of that, but you've STARTED like 5-6 threads to keep us informed on the bike. it's hard to keep track of everything.One would've been sufficient.i am a noob said it yourself and besides these are pictures, so pic thread Edited April 15, 2009 by FocusDave01 Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted April 15, 2009 Author Report Share Posted April 15, 2009 I don't know anything about that shop, but id be nervous after seeing that motor being all over the floor like that... not very professional IMO. Not something id attempt or get away with at the shop i work at either. But hopefully they will get it fixed up and running for you:Dthink they did that for me to see it when i came in... Quote Link to comment Share on other sites More sharing options...
cbr600f3 Posted April 15, 2009 Report Share Posted April 15, 2009 (edited) kinda looks like someone has had that head off aleady. on the under side gasket surface (shiny part) from your picture you can see the swirly straight lines from a die gringer and a clean up wheel. factory casting will not have those marks. or did they do that already? Edited April 15, 2009 by cbr600f3 Quote Link to comment Share on other sites More sharing options...
4DAIVI PAI2K5 Posted April 15, 2009 Report Share Posted April 15, 2009 somone needs to combine these 3 threads which are bascially the same info/post/Seriously. It's one thing to postwhore as a noob - we're semi-tolerant of that, but you've STARTED like 5-6 threads to keep us informed on the bike. it's hard to keep track of everything.One would've been sufficient.what else do u two wanna gripe about. like u have anything better to do then read all his post. im gonna start making one wor dthread so u have to read them all to figure out what was posted! Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted April 15, 2009 Author Report Share Posted April 15, 2009 what else do u two wanna gripe about. like u have anything better to do then read all his post. im gonna start making one wor dthread so u have to read them all to figure out what was posted! Thanks man thats what i said... Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted April 15, 2009 Author Report Share Posted April 15, 2009 kinda looks like someone has had that head off aleady. on the under side from your picture you can see the swirly straight lines from a die gringer and a clean up wheel. factory casting will not have those marks. or did they do that already?that i dont know they may have done that before i got there... Quote Link to comment Share on other sites More sharing options...
EagleCock Posted April 15, 2009 Report Share Posted April 15, 2009 so is this good news or bad news? Quote Link to comment Share on other sites More sharing options...
420gsxr1000 Posted April 15, 2009 Report Share Posted April 15, 2009 .....wow...we are ambitious arent we? lol Quote Link to comment Share on other sites More sharing options...
jermattak Posted April 15, 2009 Report Share Posted April 15, 2009 wow, they have a really nasty shop! why is your motor and all the internals on the ground on some dirty piece of cardboard, and nasty rags? Quote Link to comment Share on other sites More sharing options...
Disclaimer Posted April 15, 2009 Report Share Posted April 15, 2009 what else do u two wanna gripe about. like u have anything better to do then read all his post. im gonna start making one wor dthread so u have to read them all to figure out what was posted! Sucked you into our whine-fest... you're part of it now. Whining about the whiners.Do we need to call whine one one, get the waaaaaambulance down here?How's that for a pic thread? Quote Link to comment Share on other sites More sharing options...
MattKatz Posted April 15, 2009 Report Share Posted April 15, 2009 I hate to say it dude...but you dont have any Mechanical aptitude what so ever do you? (OP)That head does not look abnormal at all just from viewing it.It looks like there is a bit of Carbon Buildup on it....But nothing from "Looking" at it screams out any problems.What exacly was this bike doing again....Smoking heavily under Acceleration? Quote Link to comment Share on other sites More sharing options...
natedogg624 Posted April 15, 2009 Report Share Posted April 15, 2009 (edited) see his other threadz...and i agree that nothing stands out as "wrong." carbon build up, and gunk on the other side of the valves, hell mine has that nothing a little seafoam won't take care of. i think your problem lies with piston rings, which you could be right in the OP that it wasn't broken in properly. i was always told, smoking on accel - rings; smoking on decel - valves. not sure if its true at all...take that with a grain of salt since i can't remember if that was a legit source or not.if you get new rings, break it in HARD Edited April 15, 2009 by natedogg624 Quote Link to comment Share on other sites More sharing options...
NinjaNick Posted April 15, 2009 Report Share Posted April 15, 2009 I don't know anything about that shop, but id be nervous after seeing that motor being all over the floor like that... not very professional IMO. Not something id attempt or get away with at the shop i work at either. But hopefully they will get it fixed up and running for you:Dwow, they have a really nasty shop! why is your motor and all the internals on the ground on some dirty piece of cardboard, and nasty rags?I thought it was from someones home garage or something because if that's a dealership shop that is one rundown looking shop. Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted April 15, 2009 Author Report Share Posted April 15, 2009 Sucked you into our whine-fest... you're part of it now. Whining about the whiners.Do we need to call whine one one, get the waaaaaambulance down here?How's that for a pic thread?i made it a pic thread just for you JRM, so you would post what you posted. thats why i did it.. Quote Link to comment Share on other sites More sharing options...
FocusDave01 Posted April 15, 2009 Author Report Share Posted April 15, 2009 I thought it was from someones home garage or something because if that's a dealership shop that is one rundown looking shop. i dont know what bike shops are supposed to look like. they dont have a big shop but its what it is i guess.. Quote Link to comment Share on other sites More sharing options...
exSRAaron Posted April 15, 2009 Report Share Posted April 15, 2009 I hate to say it dude...but you dont have any Mechanical aptitude what so ever do you? (OP)That head does not look abnormal at all just from viewing it.It looks like there is a bit of Carbon Buildup on it....But nothing from "Looking" at it screams out any problems.What exacly was this bike doing again....Smoking heavily under Acceleration?+1zsee his other threadz...and i agree that nothing stands out as "wrong." carbon build up, and gunk on the other side of the valves, hell mine has that nothing a little seafoam won't take care of. i think your problem lies with piston rings, which you could be right in the OP that it wasn't broken in properly. i was always told, smoking on accel - rings; smoking on decel - valves. not sure if its true at all...take that with a grain of salt since i can't remember if that was a legit source or not.if you get new rings, break it in HARDA leak down and compression test would have confirmed that it was not likely the rings.. Quote Link to comment Share on other sites More sharing options...
natedogg624 Posted April 15, 2009 Report Share Posted April 15, 2009 did he get those done? sorry must have missed that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.