DaddyBuiltRacing Posted February 1, 2017 Report Share Posted February 1, 2017 The time has come for me to get serious about parting ways with my drag car. I built it with intention of running multiple IFO's each year, sadly I have moved on to a different part of life and simply have no desire to do anything with the car world. I have a receipt book with triple my asking price which I will include with the car. All the specs of car are listed below, be prepared it's lengthy. $11,000 take it, don't like the price, don't comment, it's pretty simple. I am located in Newark Ohio and you will need to come pick it up. I can provide any/all details you may want as well as pictures of basically everything on the car (within reason). Specs below: 97 Civic DX 835whp/502tq on 33psi Car is on e85 1 Dyno Session and 4 track passes on the turbo and transmission, less than 1000 miles on the engine. Bottom End assembled by Mike Laskey@ Laskey Racing 84.5mm Benson Sleeves Pauter Rods 10:1 CP Pistons ACL Bearings ARP Main Studs Polished/Balanced Crank Moroso Oil Pan Rotating Assembly Fully Balanced and Blue Printed Speed Theory Block Fittings Top End: Full Port and Polish Deburred and Re-Worked Combustion Chambers Skunk2 Pro 1's 01 ITR LMA's SuperTech Springs Crower Retrainers Supertech .5mm Oversized Valves KMS Bronze Guides BDL Cam Gears Go-Autoworks Cam Seal ARP Head Studs Golden Eagle Headgasket Edelbrock Victor X Intake Hondata Intake Manifold Gasket Phearable.net 70mm Throttle Body Shaved Valve Cover (2) -10an Fittings Welded in Valve Cover Drivetrain: GSR Transmission Tilton Twin Disc ARP Flywheel Bolts ARP Pressure Plate Bolts MFactory Helical LSD Speed Factory Cuff (4 speed) MFactory Magnetic Drain Plug MFactory Differential Bearings Gear Speed Carbon Coated Synchros Go-Autoworks Braided Clutch Line Kit Turbo Setup: MSA Forward Facing Manifold Borg Warner sx400 (67mm) 1.10ar Precision 46mm Wastegate MSA Hood Exit Up-pipe MSA Intercooler Piping (3" cold side) w/black couplers Go-Autoworks GT Series Oil Catch Can Go-Autoworks Pro Series Black Oil Line Kit Speed Factory 4 Bar Map Sensor Autometer Sport Comp Black Faced Boost Gauge PWM Boost Solenoid Go-Autoworks Push Lock Vaccum Kit Fuel/Mounts: FID 2000cc Injectors Full-Blown Twin Walbro Setup w/450lph Pumps wired with relays Aeromotive Fuel Pressure Regulator Aeromotive Fuel Filter Edelbrock Fuel Rail Jegs Liquid Filled CF Fuel Pressure Gauge 0-100PSI Jegs AN Fittings (Black) Jegs SS Line (Black) Electronics/Ignition Hondata s300 Tuned by Eric Jarvis Mad Scientist Autohouse Hondata CRP Conversion (coil on plug using D17 packs) AEM Uego Wideband Blox TPS Sensor NGK Spark Plugs Wheels/Suspension/Random: Lenso 13x8 (hydro dipped skulls and machine guns) Go-Autoworks Rear Bumper Diffuser Omni Drag Coilovers Go-Autoworks Radiator Go-Autoworks Slim Fan Go-Autoworks Radiator Shroud Jegs Battery Relocation Kit CCC Drag Wing Kirkey Aluminum Seat (only 1 seat in the car) Parachute 10 point cage (needs certified) 5 point harness (out of cert) Pics: http://i126.photobucket.com/albums/p81/alittlelessordinary/dyno_zpsy7tw7csd.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/civic%203_zpsl6q6l13e.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/civic2_zps7vfjbkrp.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/civic_zpsnimuieot.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/civic4_zpsi3fmcip9.jpg Link to comment Share on other sites More sharing options...
jerrodh Posted February 1, 2017 Report Share Posted February 1, 2017 What did it run? GLWS Link to comment Share on other sites More sharing options...
DaddyBuiltRacing Posted February 1, 2017 Author Report Share Posted February 1, 2017 11.3@103 LOL, lost the clutch during the very first burnout. It went 117mph on that pass, slipping the entire way. I have no doubt in my mind it's a 9.2-9.4 car. I just don't want to tinker on cars anymore these days, kids kind of happened and just want to move away from it. Link to comment Share on other sites More sharing options...
Forrest Gump 9 Posted February 2, 2017 Report Share Posted February 2, 2017 Do you still have the interior parts? Any interior shots? Link to comment Share on other sites More sharing options...
DaddyBuiltRacing Posted February 2, 2017 Author Report Share Posted February 2, 2017 It has a kirkey, cage, some dash and door panels...It is a racecar, definitely not a street car Link to comment Share on other sites More sharing options...
DKilbourne Posted February 4, 2017 Report Share Posted February 4, 2017 Any more pics of the body? Link to comment Share on other sites More sharing options...
DaddyBuiltRacing Posted February 5, 2017 Author Report Share Posted February 5, 2017 Yeah I can get some Link to comment Share on other sites More sharing options...
Recommended Posts