06 honda cbr600f4i undertail/fender 1/2" shorter singnals for free

[marlboro man]

hear's what I did after spending $600 on a stripper to get her to go riding then I was broke & had no $ for bike & it needed some trim takes a 1 1/2 hr & what tools you will need 8mm&10mmsocket a 6" extenshon,fillips screwdriver,1/4"&1" drill bit, drill,jig saw,tape to cut a long,

Edited October 2, 2011 by marlboro man

[marlboro man]

start out buy removeing rear light wire plugs under seatthen turn singnals 10mm nuts under fender ,then remove front 1/2"shorter front sister singal spacers from front singal as my front singals where broke by last owner & have flush mount singals now in front by pulling the wire gurter belt back so you can get to screw then put 1/2"shorter sister on back singal hears what thay look the one on the left that I'am fingering is the 1/2" shorter one do not put singals back on yet now remove the reflector use 8mm & 6"ext to remove nut under seat then license plate light/bracket 10mm under fender then remove light from bracket now drill 1/4"license plate holes& 1/4"&1" license plate light holes the stock one on the right will need drilled out biger use it to mark other side left nut hole & center one will be drilled out to 1"& now cut fender to the triming you like with jig saw use tape for a gaid linethen you got you some new trim vs old

Edited October 2, 2011 by marlboro man

[ktmryan53]

1st sentence is the best part.

[Beegreenstrings]

Ok nice how to. But there are no pics of the stripper.

[marlboro man]

I'am really to cheep to spend money on stripers so hear you go & hear is one is one that had a bad ass body trying out a pole when we tryed to start a home based stripper pole business but photo sucks

[max power]

Awesome write up, Joel. You crack me up man.