rawlins87 Posted February 16, 2012 Report Share Posted February 16, 2012 Its the time of year where my work is slowing down and i have free time. Also time when alot of people are taking on bike projects. Ive been welding for couple years now, have done work or CR and OR members. With that being said, if anyone is taking on a project and needs help with the welding pm me for help. Can be bike related or non bike projects. Quote Link to comment Share on other sites More sharing options...
J_Copeland Posted February 16, 2012 Report Share Posted February 16, 2012 How about unwelding?I have a rail trailer that need's the center rail removed.I could cut it off,but maybe you have a better solution. Quote Link to comment Share on other sites More sharing options...
max power Posted February 16, 2012 Report Share Posted February 16, 2012 The young Rawlins is a fine welder and a stand up guy. He has done high quality work for me at very reasonable prices. Recommended. Quote Link to comment Share on other sites More sharing options...
shittygsxr Posted February 16, 2012 Report Share Posted February 16, 2012 I was thinking about a stainless manifold for the zx10r so was bornsinner. If you think you might want to try making a couple of these let us know. Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted February 16, 2012 Author Report Share Posted February 16, 2012 I was thinking about a stainless manifold for the zx10r so was bornsinner. If you think you might want to try making a couple of these let us know.I would love to try it, although i dont have axcess to a pipe bender.If there is a "kit" that just needs welded then id be down. Stainless is my forte. Quote Link to comment Share on other sites More sharing options...
shittygsxr Posted February 17, 2012 Report Share Posted February 17, 2012 I would love to try it, although i dont have axcess to a pipe bender.If there is a "kit" that just needs welded then id be down. Stainless is my forte.I could buy some u and j bends, I will look into prices and making flanges Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted April 8, 2012 Author Report Share Posted April 8, 2012 Bump Quote Link to comment Share on other sites More sharing options...
Casper Posted April 8, 2012 Report Share Posted April 8, 2012 I've seen the work he did on Max's swingarm skid-plate. It is top notch. Quote Link to comment Share on other sites More sharing options...
imprez55 Posted April 8, 2012 Report Share Posted April 8, 2012 I could buy some u and j bends, I will look into prices and making flangesWould like some more info on the possibility of this Quote Link to comment Share on other sites More sharing options...
jagr Posted April 8, 2012 Report Share Posted April 8, 2012 I have always wanted an outside pull up bar I can cement into the ground. Can you give me a guesstimate on price. You decide on materials. Anyway to knurl the bar? Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted April 8, 2012 Author Report Share Posted April 8, 2012 I have always wanted an outside pull up bar I can cement into the ground. Can you give me a guesstimate on price. You decide on materials. Anyway to knurl the bar?Stainless bar if its outside.Could use steel but rust would be a concernYou can cut knurling with a lathe.powder coated rack with a stainless bar would be my reccomondation Quote Link to comment Share on other sites More sharing options...
jagr Posted April 8, 2012 Report Share Posted April 8, 2012 Stainless bar if its outside.Could use steel but rust would be a concernYou can cut knurling with a lathe.powder coated rack with a stainless bar would be my reccomondationKnutling not really necessary. I'd prolly just tape it and use gloves. Stainless is prolly going to be cost prohibitive. I could spray steel with engine paint and bake it witha heat gun/torch. Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted April 10, 2012 Author Report Share Posted April 10, 2012 Knutling not really necessary. I'd prolly just tape it and use gloves. Stainless is prolly going to be cost prohibitive. I could spray steel with engine paint and bake it witha heat gun/torch.If your serious we can make it happen. Quote Link to comment Share on other sites More sharing options...
Hoblick Posted April 11, 2012 Report Share Posted April 11, 2012 Knutling not really necessary. I'd prolly just tape it and use gloves. Stainless is prolly going to be cost prohibitive. I could spray steel with engine paint and bake it witha heat gun/torch.call research alloy in columbus... youd be surprised at the prices they have. Quote Link to comment Share on other sites More sharing options...
jagr Posted April 15, 2012 Report Share Posted April 15, 2012 Ok. Let's see what I can find out. But yeah. I want to do something. Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted November 1, 2012 Author Report Share Posted November 1, 2012 Aluminum plate for a memberpiece was cut and reversed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.