RidersDiscount

An air conditioner for your upper body with CE-approved armor inserts, provisions for upgraded armor and plenty of pockets, it’s the Viper V2 jacket from Alpinestars. The jacket is cut for use on fast bikes and features waist adjustment tabs and buttons at the shoulder for cinching it down to prevent it from flapping in the wind while you ride. The outer shell is made with a road-going fabric for abrasion resistance and even comes with a zipper for the attachment of compatible riding pants. Soft collars inhibit chafing and there’s even a removable wind breaker fitted on the inside of the jacket. You can stuff that away in your bike’s tailpack for cooler riding conditions. In the event you get caught out in the rain waterproof inner pockets keep your gear dry. It’s a really versatile jacket for any rider seeking maximum cooling while still being protected when out on the road. Available in a range of sizes and three different colors, be sure to get the correct one to fit you by calling TJ on 866.931.6644 ext. 817, send a note to forum@ridersdiscount.com with ALPINESTARS VIPER V2 AIR JACKET in the subject line, or just shoot us a PM and we’ll get back to you right away.

Surround your feet in comfortable, waterproof protection with a pair of Alpinestars Faster-3 Drystar riding shoes. Like all Drystar equipment, these shoes are fitted with a 100% waterproof membrane making them a workable solution for poor weather riding. Waterproofing aside, the entire shoe provides a lot of comfort with its anatomically-shaped chassis that holds your foot securely in place while you ride. You’ll notice the rubber sole’s shape is narrow, and a little on the thin side. This design choice provides lots of feel through the pegs while, but thanks to the Alpinestars-designated rubber compound, it holds up well over the miles. Impact protection is assured with various pieces of armor inserted throughout the advanced microfiber material that’s used on the outer portion of the shell. Dual-density ankle protectors and a hardened heal box mitigate impact forces handily. These shoes are also fitted with a set of replaceable toe sliders in the event you’re rather quick out on the road. To prevent the laces from getting chewed up in the chain system, just secret the tie in the laces behind the Velcro strap at the top of the shoe’s front. The padded tongue won’t chafe or pull as you ride along. These shoes are an excellent choice for the all-weather rider who wishes to avoid carrying an extra set of shoes just to roam when not on the bike. You can get this all-day comfort, protection and waterproofing in either black and red or black and yellow. Take advantage of expert sizing advice by giving TJ a call on 866.931.6644 ext 817. Or, just send a note to forum@ridersdiscount.com with ALPINESTARS FASTER-3 RIDING SHOES in the subject line and we’ll get back to you right away.

I don't have stock on the TRS right now but we do expect to have them next month. Pit Bull does not allow us to discount their product. Their pricing on everything but the pins is $240.

The Alpinestars Challenger V2 Suit is constructed from 1.3mm full-grain leather, making it extremely abrasion resistant. Perforation throughout the suit allows for excellent ventilation. The Challenger V2 has stretch panels on the arms, crotch, and knees for flexibility and comfort. This suit is equipped with leather accordion stretch panels for better mobility and performance. This suit incorporates GP-R internal knee, tibia, and shin protectors. Newly developed over-molded shoulder TPU guards and PU sport knee sliders offer additional protection. Internal elbow and shoulder protectors are also built into this suit. The inside chest, hips, coccyx and back areas come equipped with PE comfort padding. If you're looking for more protection, the Nucleon KR-R Back Protector and Nucleon KR-Ci Chest Protectors are compatible and sold separately. The Challenger V2 has an aerodynamic back hump that is positioned with a 3D mesh panel for increased airflow. Expansion gussets on the back of the calves provide additional flexibility. Inside of this suit is a mesh liner for ventilation and comfort. MSRP $899.95 If you have any questions about this product or would like to place an order, feel free to give TJ a call at 866.931.6644 ext. 817. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM and we'll get back to you right away!

Easy on the hands, without the complexity of a full-on race glove, SMX02 Air Carbon from Alpinestars are the preferred gloves of the across town rider, or even, the distance rider. Protective comfort is built using a combination of smartly placed leather panels over impact areas and stretch mesh panels were road rash is less of a concern. Two layers of leather are used on the palms and from the outside pinky all the way back to the wrist cuff. A large carbon fiber knuckle is fitted as standard which too, is surrounded by a large swath of leather on all sides. There’s plenty of ventilation here, too. Intakes are fitted between the knuckles and at the back of the hand. These portions are further aided by flexible 3D mesh swatches that allow your hand to breath freely while you make way on your motorcycle. Available in black as well as colored varieties, these gloves make an excellent addition to any rider for short hops across town or anywhere comfort with protection is required. You can order these gloves and take advantage of expert sizing advice by calling TJ on 866.931.6644 ext. 817, sending us a PM, or a note to forum@ridersdiscount.com with ALPINESTARS SMX-2 AIR CARBON V2 LEATHER GLOVE in the subject line, just be sure to specify the color you want - and we’ll get back to you right away.

We don't sell Madstad, but I can get you the Puig Touring screen for quite a bit less money.

The variety of gloves available from Alpinestars Italy never ceases to amaze us. Every riding need is covered and then some. And then there are some specialty gloves with specific applications, like the GPX V2 gloves. These gloves fit under the leather sleeve of your motorcycle riding jacket. A special neoprene wrist sleeve relies on your riding jacket’s cuffs to cover the wrists, while your fingers and palms are well-covered with premium cowhide leather. Ventilated hard armor is fixed atop the knuckles and held in place by perforated leather to keep you cool. And, where required - accordion leather allows uninhibited flexibility of the fingers so you have full control of your bike. Extra swatches of leather are fitted in all the right places, too – the pinky side of gloves, the thumb, and at the palms where maximum abrasion resistance is required in the event of a crash. Plus, Alpinestars’ signature third and fourth finger bridges are fitted to both gloves so as to protect the pinkie from a painful break if it were to get caught up in a crash. Fitting under the sleeves aside, practicality is looked after with a touchscreen-compatible index finger tip. Manipulating these ever more common controls on your bike will be no problem with these gloves. Slip-on these CE-certified gloves and set your hands free in elegant protection no matter what you’re riding. Alpinestars GPX V2 gloves are available in three different colors. Take advantage of expert sizing advice by calling TJ on 866.931.6644 ext. 817, sending us a PM or a note to forum@ridersdiscount.com with ALPINESTARS GP X V2 GLOVES in the subject line and we’ll get back to you right away.

Designed from the neck up for the road-going rider, the Quantum-X helmet from Arai applied their decades of experience building some of the best helmets in the world to an every-day helmet. Starting with the helmet’s interior shape, the round oval, Arai is the only manufacturer that we know of who does this – the shape is designed for maximum comfort in a rider that isn’t pleased with a near-enough fit. It’s a little shorter front-to-back while at the same time, a little wider than most helmet shapes on the market today. This shape is housed inside Arai’s super complex laminate shell, the same materials used on their top-of-the-line helmets, to impart a high degree of protection to the wearer. Vents and exhausts are carefully integrated into the shell, fore and aft - that perform optimally at typical road-going speeds. Not only that, but there’s no on/off adjustment here up top. With this helmet, you can dial in just the right amount of incoming air. This feature alone can only be fully appreciated when the weather is a bit on the cooler side since these intakes draw in a lot of air. Now, you don’t have to choose between sweating and freezing, just adjust as needed with your gloved hands and ride on. At the chin, a closeable intake is fitted as standard, this can be opened to either divert air upwards and assist in keeping a fog-free view of the road ahead, or at a second adjustment point, move air straight towards the jaw for maximum cooling. And directly below that, for when road conditions turn especially dirty or the skies open up, the included chin curtain keeps your face clean and dry. If you’ve ever been peppered in the face by tiny pieces of dirt that inevitably get sucked up behind the faceshield, this little gadget is worth its weight in gold. And don’t forget to keep it handy when it’s cold too, the extra insulation makes a big difference! That brings us to the helmet’s liner, Arai’s anti-microbial, fully-removable liner is comfort defined. Properly size (talk to TJ about that!), your head will be surrounded by an illustrious combination of cheek pads, scalp insert, chin strap liners and a neck roll that almost disappears when you put it on. Plus, even though it does stay fresh longer than lesser liners, it can easily be removed to be washed and refreshed as needed. A clear, quick-change shield comes standard with each Quantum-X helmet, and smoked versions are available as well. Plus, you get a Pinlock lens as well that’s ready to install. Fog will never be a problem with this affixed to your faceshield. For the street rider, there’s little left to be desired in a helmet! For expert sizing guidance and lightning-fast shipping, call TJ on 866.931.6644 ext. 817, send a note to forum@ridersdiscount.com with ARAI QUANTUM-X HELMET in the subject line, or just shoot us a PM and we’ll get back to you right away.

Two things many riders notice when they start truly tucking in at the track: – it gets you down the straights faster, and it can be brutal on your chest at some of the bumpier tracks around the world. And yes, the faster you get – the more protection you’re going to want. Alpinestars’ KR-CiR chest protector is a lithe, comfortable affair that addresses not only the safety aspect of full-tuck riding, but also takes out the brutality of the fuel tank slamming into your chest. It’s a flexible, CE Level 2 certified piece of armor that slips into the front side of your Alpinestars leathers. In addition to providing a significant level of additional impact protection for an unfortunate chest-first landing, the Kr-CiR also moves the leathers off your chest a bit, and in combination with its fenestrated chassis, provides additional cooling comfort as well. Once installed, it quickly contours itself to compliment your anatomy, thereby providing seamless safety that won’t interfere as you move about the bike at speed. The KR-CiR comes in two sizes, so be sure to give TJ a call on 866.931.6644 ext 817 for expert guidance. Or, just send a note to forum@ridersdiscount.com with ALPINESTARS NUCLEON KR-CIR CHEST PROTECTOR in the subject line and we’ll get back to you promptly.

Replace your damaged stock front brake master cylinder with a like model from Nissin, without the OEM price with a Nissin radial front brake master cylinder from Riders Discount! Commonly found on OEM Japanese handlebars, the Nissin radial front brake master cylinders are the preferred original equipment supplier for all of Japan’s road-going fast bikes. These master cylinders have 19mm bore and readily accept the 10mm x 1.25 banjo bolt found on Japanese motorcycles. With that, and the included brake-light operating switch, you have everything you need to replace your bike’s M/C without issue. Each master cylinder ships with a clamp and brake fluid reservoir. Just attach your brake line, add fluid, bleed correctly and hit the road. You can choose this master cylinder with a gold or black pump housing with either, a black or silver lever. You can get yours by calling TJ on 866.931.6644 ext 817, send a note to TJ via email; forum@ridersdiscount.com with NISSIN RADIAL MASTER CLYINDER in the subject line or just send a PM right here and let him know what color combination that you’d like and we’ll get back to you right away.

The Alpinestars Motegi V2 Suit is constructed from 1.3mm full-grain leather, making it extremely abrasion resistant. Perforation throughout the suit allows for excellent ventilation. This suit features stretch fiber panels on the arms, crotch, and legs for flexibility and comfort. It is equipped with leather accordion stretch panels for better mobility and performance. The Motegi V2 incorporates Alpinestars’ Dynamic Friction Shield (DFS) shoulder and PU sport knee sliders. Removable, CE-approved elbow, shoulder, and knee protectors are also included. The chest, coccyx, hips and upper arms have PE comfort padding. If you're looking for more protection, the Nucleon KR-R Back Protector and Nucleon KR-Ci Chest Protectors are compatible and sold separately. The Motegi V2 has an aerodynamic back hump that is sculpted for better airflow. Inside of this suit is a removable mesh liner for ventilation and comfort. The Alpinestars Motegi V2 Suit is available in 1-piece and 2-piece options. MSRP $999.95 If you have any questions about this product or would like to place an order, feel free to give TJ a call at 866.931.6644 ext. 817. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM and we'll get back to you right away!

Ensure stable delivery of power to your bike’s entire electrical system with a regulator/rectifier from Rick’s Motorsport Electrics. This US-based company designs and engineers OEM and Wherever possible, MOSFET (Metal Oxide Semiconductor Field Effect Transistor) switching circuitry is used by Rick’s. MOSFET switching provides better control of downstream current, especially when the voltage coming off the stator is rather weak. The result is, not only a more stable downstream power supply, which is becoming even more critical on bikes equipped with traction control and other sophisticated power-hungry components, but also, potentially higher wattage when compared to stock on some models. This is logical considering less electrical energy is consumed by the device itself when switching circuitry. Of course, all of this happens without any input from the rider, but you may notice less flickering of the instruments and headlights while you ride, especially in low-light conditions. Best of all, and unlike OEM regulator/rectifiers, all Rick’s units are backed by a one year manufacturer warranty. To order yours, call us on 866.931.6644 ext 817, send a note to TJ via email; forum@ridersdiscount.com with RICKS REGULATOR RECTIFIER in the subject line or just send a PM right here along with the exact model and year of your machine and we’ll get back to you right away!

Arai does the Limited IoM TT commemorative helmet in limited runs and we managed to get our hands on the last remaining few lids for your riding pleasure. Using Arai’s Corsair X helmet, the Drudi Performance commissioned paint scheme is one of the more visually erm … robust helmets from the IoM line that we’ve seen since they first came about twelve years ago. You get a helmet with exceptional ventilation and an unobstructed view of the road ahead in arguably the most comfortable helmet you can buy. Safety, being that it’s an Arai, is without question paramount as the helmet meets all of the most stringent safety standards. There’s plenty more to say about this helmet, but instead, we think you ought to check out the good looks of this lid by examining the photo below. MSRP $1059.95 And then, for expert sizing guidance and lightning-fast shipping, call TJ on 866.931.6644 ext. 817, send a note to forum@ridersdiscount.com with ARAI IoM TT Helmet in the subject line, or just shoot us a PM and we’ll get back to you right away.

A harbinger is defined as a person or thing that signals the approach of another person or thing. Your approach in the Airframe Pro can be the harbinger of your choosing, and you’ll look good doing it. The skulls n’ bones paintjob covers ICON’s standard polycarbonate shell with an integrated ventilation system. You get six intakes on the front side of the helmet that compliment four exhausts on the aft side of the lid. The whole affair channels air through a series of corridors built into a comfortable, HydraDry interior liner (which is fully removable!) to keep you cool on those sunny days. You know the route, let TJ know you want this helmet - and don’t forget to add a dark-colored shield to your helmet order! The visors are easy to swap out, so there’s no excuse not having one in your arsenal. For exceptional fit guidance and fast shipping or, if you have any questions or would like to order please contact TJ on the phone at 866.931.6644 ext 817, via email; forum@ridersdiscount.com with ICON HARBINGER AIRFRAME PRO HELMET in the subject line or just send a PM right here and we’ll get back to you right away!

More power and less weight – it’s everything you need for Kawasaki’s 400cc machine. You’ll save over five pounds of weight upon the installation of this exhaust, which, while it doesn’t sound like much, for these smaller bikes, weight savings of any kind are an especially welcome treat. Starting with top-quality stainless steel headers that are precisely bent for a clean, trouble-free installation, the exhaust is topped off with an elegant Graves carbon fiber muffler. The whole system compliments the Ninja 400’s shape and style in addition to freeing up additional engine performance. And performance is where it’s at – Graves claims that, once fuel delivery is properly adjusted, you can expect a 10% gain in engine output. Those kind of gains are unheard of with the simply addition of an exhaust and tune on any modern big bike that we can think of! The extra power will be appreciated when you open it up the first time out with your new exhaust. For the truly performance-minded rider, an oxygen sensor bung is fitted as standard allowing maximum tuning possibilities with the appropriate hardware (TJ can tell you all about that!). It’s just another piece of this awesome exhaust the will help you get the most out of your Ninja 400. Every exhaust comes with all required installation hardware and easy-to-follow instructions. If you’re comfortable with performing an oil change, then installing this exhaust will be no problem. An evening in the garage and simple hand tools are all it takes to get the job done. To order yours, call TJ on 866.931.6644, send a PM here or email forum@ridersdiscount.com and we’ll get back to you right away!

Aimed squarely at the fast trackday rider or club racer who’s looking for premium protection without the premium price, the GP Pro V2 is where it’s at. Assembled entirely using carefully chosen cowhide, this suit is ready for years of reliable use under the most demanding of conditions. To ensure ease of flexibility, the cowhide chassis is put together using a combination of leather accordion stretch panels in high-impact areas and stretch panel material in the crotch, under the arms and at the calves so the suit readily molds itself to your position on the bike. It cannot be understated how fantastic it is to be able to move about on the bike without feeling like there’s a rubberband at your side trying to pull you out of shape. To order this suit along with expert sizing advice, give Mike a call on 866.931.6644 ext 81/. Or, just send a note to forum@ridersdiscount.com with ALPINESTARS GP PRO V2 SUIT in the subject line and we’ll get back to you promptly.

Sending PM

All of the same features as the AiM Solo 2, the AiM Solo 2 DL comes with the added ability to plug straight into your bike’s OEM wire harness for the ultimate in data collection. A simple, model-specific ECU wire harness handles all of the data acquisition in one. You’ll be able to review all critical bike information at any point on circuit using AiM’s Race Studio software. Now, when you get off the bike, there will be absolutely no question as what exactly happened while you were out on track. Knowledge is power, but here, it’s all about speed. Aimed squarely at the data-driven trackday rider and racers everywhere, AiM’s Solo 2 DL GPS lap timer gives you everything you need to make the most out of your time at the track in one easy-to-use device. What sets the Solo 2 apart from other GPS-based lap timers is the fact that it draws positional data not only from American GPS satellites, but also from the GLONASS constellation. The result is a very precise lap timer that provides the kind of feedback you need to improve your pace at any track on Earth. The Solo 2 DL draws upon a map of over 2000 circuits in order to determine the basics such as start/finish position as well as the layout of the course. If you’re at a familiar track, by the time you head out for your session, it’ll indicate where you are and automatically start running the clock in the right spot. And for those lucky enough to have built their own private racetrack on a plot of land somewhere, the Solo 2 will figure that out quickly and function as it were on any of its known circuits. Circuit use isn’t the device’s only strength. If you like to spend time at the drag strip, the Solo 2 DL can be configured track common performance metrics such as straight line acceleration. The unit is truly versatile, no matter the type of performance riding. And what good is the data if you’re unable to examine it? That’s where the Wi-Fi functionality comes into play. You can download all the data from each session wirelessly, straight to any compatible device using the included software. With that, you’ll instantly see where your performance stands, any time you want, examine anything the bike was doing at a given point on track and full understand where improvements can be made. That, and soon, there’ll be an iOS app available to greatly simplify post-session analysis! Each Solo 2 DL comes with model-specific ECU cable, a power cable for wiring it into your bike’s 12V power supply, a plug-in wall charger, mounting bracket with hardware, CD with the requisite software and a well-written user manual. Furthermore, an array of add-ons are available that allow you to truly exploit the device for maximum gains at the track. Particularly nifty are the ECU interface and video camera integration tools that allow you to have an overlay of all critical data while watching the playback of your session. With that, you’ll truly be able to unlock your own potential every time you step out for a session at speed. Everything you need and more, in one simple device. Orders yours today by calling TJ on 866.931.6644 ext 817, send a note to forum@ridersdiscount.com or just PM us here and we’ll get you tidied up right away.

The Arai Corsair X Bracket is also available in Flo Yellow Nice shot of all 3 colors together

We can get the Kock Werks radiator guard.

Unlock maximum potential of your PC-V equipped machine with a Secondary Fuel Module from Dynojet. The SFM, as it’s known colloquially, is a required component for anyone looking to add a Dynojet quick shifter and it’s an especially useful device for anyone that’s had a proper engine build completed, superstock or superbike – as it allows your dyno tuner to provide the most complete engine maps possible. The device plugs into the Power Commander V on one end, and the other side pigtails are attached to your bike’s secondary fuel injectors. These are the ones that come on at full throttle. When used in conjunction with a quick shift kit from Dynojet, these are the injectors that are shut off momentarily when you shift gears, thereby unloading the transmission and allow you to snick into a higher gear. And of course, anyone that’s got a serious engine build and a competent dyno technician, this unit is a must-have for maximum top-end power. If your tuner knows the game, a map for each gear can be built using this device, truly unleashing every bit of power your bike can make. To help unlock the true tuning potential of your bike as well as enable quick shifter functionality, call TJ on 866.931.6644 ext. 817, send a note to forum@ridersdiscount.com, or just shoot us a PM and we’ll get back to you right away. Just be sure to let us know exactly what bike you’re riding and we’ll get back to you shortly.

Stretch panels, CE-approved armor inserts and perforated premium 1.3mm thick cowhide give you the perfect summer jacket that doesn’t compromise on comfort, or protection. The GP Plus R V2 Airflow jacket was built for the serious street rider that wants a full leather chassis, without the full-leather sweat. You’ll find surgically-positioned perforation on the abdomen, arms and upper chest. These, of course, bring plenty of cooling air inside the jacket as you cruise down the road. Under all of this you’ll find a 3D mesh inner liner which allows you to move about freely within the jacket. This is done by keeping your skin away from the inside-facing leather of the jacket, which, in addition to the free movement it allows, also keeps you cooler, too. As is standard on the modern road-going jacket, CE-approved armor is fitted in the elbows and shoulders. There are also pockets to add optional chest and back armor as well, something we can most certainly help you out with to achieve maximum protection. At the base of the jacket, you can even zip in a set of compatible riding pants from Alpinestars, too! The jacket is cut in a pattern that’s suitable for cruisers and fast bikes alike, so you only need to keep one jacket in the closet even though you may have a few different bikes in the garage! Available in a range of sizes, be sure to get the correct one to fit you by calling TJ on 866.931.6644 ext. 817, send a note to forum@ridersdiscount.com with ALPINESTARS GP PLUS R V2 AIRFLOW JACKET in the subject line, or just shoot us a PM and we’ll get back to you right away.

Just because he’s eternally been number two, doesn’t mean Randy can’t be number one on your helmet list. Besides, he’s still faster than most people on this planet, ever. What is number one is that the Corsair X as it’s Arai’s top-of-the-line helmet and one of the best helmets you can buy, bar none. Ventilation, coming in and going out – is completely adjustable. The helmet’s interior is plush, and fully-removable and washable. Quick-release cheekpads are fitted as standard and you can even order different size cheekpads to fine-tune the helmet’s fit. Though, if you get in touch with TJ, he’ll have you on the right track for fitment in short order! For expert sizing guidance and lightning-fast shipping, call TJ on 866.931.6644 ext. 817, send a note to forum@ridersdiscount.com with Arai Corsair X Mamola Edge Eagle Helmet in the subject line, or just shoot us a PM and we’ll get back to you right away.

You like bikes and skulls, here’s a helmet for riding your bike with a big skull on its aft side. There’s also a skull on either side of the helmet … and a set of humerus bones rendered on its top, which is funny. Skulls and bones aside, the Skull 18 features a massive flip-up faceshield in front of a standard chinbar design that comes standard with every Airflight helmet from ICON. The faceshield itself has vents in front of the mount, and user-adjustable intakes are fitted just above the forehead. These all, of course, are complimented by a series of exhaust vents carefully placed on the back of the helmet to keep you cool on hot summer days. It’s comfortable inside too, for your skull. A removable Hydradry liner keeps your skull properly positioned within the helmet, and keeps it dry, too. And to keep you from squinting down the road, ICON’s DropShield system with a dark-tinted visor is fitted as standard. There’s no need to carry an extra faceshield here! For exceptional sizing guidance and fast shipping or, if you have any questions or would like to order please contact TJ via email; forum@ridersdiscount.com with ICON SKULL 18 AIRFLIGHT HELMET or just send a PM right here and we’ll get back to you right away!

If you haven’t already put a nice muffler on your BMW, this is the one for you! Made on the same continent as the BMW, exceptional craftsmanship is apparent in this exhaust. From tip to tail, the exhaust is fabricated entirely using titanium. This material is only interrupted by the stainless steel bolts that hold the included carbon fiber heel guard in place. You, or rather your right boot – will appreciate the carbon fiber panel too, as it’ll keep the burnt rubber off your exhaust. That annoyance is not to worry here. It bolts straight up to the stock headers on your machine; there’s no custom fabrication work here. Speaking of custom work, have a look at the exhaust’s outlet! A titanium mesh screen comes fitted as standard. You’ve seen that on GP bikes, and now, you can add it to your own. Its purpose? Probably something you’ll never experience on your BMW, but it’s there to keep valvetrain components from blasting out of the exhaust and hitting whoever’s behind you. Again, not something you’re likely to experience with this bike, but the added security is a nice touch. Like all Akrapovic exhausts, craftsmanship is second-to-none and everything fits just as right. Inside the shipping carton, you’ll find a full set of instructions with pictures along with all of the required installation hardware. Available for all 2017 and 2018 S 1000 RR models, give TJ a call on 866.931.6644 ext 817 to get this, or any other Akrapovic component sent straight to your door. Of course, forum@ridersdiscount.com or a PM works, too!