M_Quick

Went looking for a truck, and ended up buying this Mustang. Had only 25k miles on it. Here's a few pictures. Car came with this cover, looks almost like new. I'm not sure if its indoor or outdoor. Seams weather resistance but hard to tell. I added the ROUSH Mustang Hood Strut kit. Also put the comfort sleeve on the seat belts. The Carbon fiber kit was part on the Roush stage 1 upgrade. The Roush Short throw shifter is sweet! Took a week to clear out enough room in garage. The main problem was a 1979 F150 4x4. I listed it on CL but no interest, so I shipped it off to have it worked on. Maybe some day I can use it to haul my quad.

Dude must have his K's and Hund's cornfused.

It is bad ass, but come on $13,500.00 for a 4 wheeler! It does have Fox shocks all the way around and a 3 stage power steering unit. Dry weight of like 687lbs! He says it will do 100mph! But i think he's full of poop! Probably has a rev limiter on it set somewhere around 80ish, but IDK. We did go out Saturday, but it was flooded, and no way to get any speed up. He used to have the 800, and we hit Wayne a couple times last year. I don't think he will be there the weekend of the 20th.

The New Power Commander V is loaded with tons of new features. Below you will find some Power Commander V features. Reduced size from PCIIIusb (less than half of the size of PCIII) USB powered from computer (9 volt adapter is no longer needed for programming) 2 position map switching function built in (map switch not included) Gear input (allows for map adjustment based on gear and speed) Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature) With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables). Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes 10 throttle position columns (up from 9 on PCIIIusb) Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)

If you know the owner, don't tell him someone on ebay is giving his product away dirt cheap. They must have a hell of a mark up on it, or this seller took a loss. My setup from hmf would of been $550.95 before tax and shipping if they charge either. And I got mine shipped with extra black vector end cap for $390.00! http://www.ebay.com/itm/180639862710?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_3298wt_1163

Mine is FI and set with the recommended map from Power Commander. So I hope it don't pop or nothing. I will be taking it out on a little test ride Sat. A friend of mine just picked up this little 2012 Can-Am Renegade 1000X xc. And he's smack talking...

Damn I wish I wouldn't of put new tires on my oem Suburban rims last fall. I was looking for something like this all over craigslist, with no luck.

Cant wait to break out my Honda. I recently installed a Power Commander 5. And a HMF Performance Full System Exhaust. Rode it down the back alley a couple times and did a few doughnuts in the abandon BP lot across the way. It has a lot more power, as if it needed anymore. And sounds awesome. I think that was bowdog I was following last December, and his pipe sounded so sweet I had to have one, lol.

welcome to the club!

Hey hey! I bought my Dell 3 years ago. It has the i7 920 "8 core processor", came with 6 meg of ram. 750 gig h/drive ATi Radeon HD 4800 series http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-4000/hd-4800/Pages/ati-radeon-hd-4800-overview.aspx Still a nice computer 3 yrs later. I added 4 terabytes of h/drive. And 12 more gigs of ram. Looking to add a blue ray burner next.

Iron Pony has great deals on helmets, like this one, http://www.ironpony.com/ironponydirect/product.asp/ImageName/bell-mako-black.jpg/Brand/BELL/Class2/Helmets/Class3/Full%20Face%20Helmets/Class1/ But finding your size there for this price tends to be difficult to says the least.

x2 http://www.mjusaracing.com/

That's what I was thinking, and from what I gather they will be on a 2 wheel bike. So that could be really bad there, if Wayne is 1/2 as wet as it was last year at opening weekend. Here's a picture of my 2 quads, we rode from New Straitsville to Dawley cemetery area, which isn't far and took picture.

I was thinking about just riding for the day, but since you have the awning to drink under at night! Might just have to dig out the camping gear too!

I herd there adding a urinal to the women's rest room. 1/2 the work is completed already.

That was bad ass, would love to see it in HD!

Welcome to the club!

Didnt work for me with ie 9.0x but worked with google chrome, sweet!

I need help on video posting too! I usally add videos by clicking the icon of the globe and link, that says insert link. And then paste link there, and it works on other forums but no luck here? All I get that way is a hyper link.

The design or the way it handled those logs? That I went over when I ran outa trail and rode the berm for a few, after those 4 little jumps.

thanks for all the welcomes! Not sure where your looking or how much you willing to spend, but I've seen a few go for around $4500 moded out with like 2k in upgrades. And you do know they only made them in 2008 and 2009. Thanks again for letting me tag along. I have a couple videos ready to share, just have not fiqured out how to on this site. I share them on 2 other sites all the time. Usally click the insert link icon and paste the info there. But all I get here is a link to video, I want the video to play from the same window. Adding pictures seams the same. Here's a picture of my Honda before I upgraded the tires.

Hi! My name is Mick, aka M_Quick. I ran into a few riders @ Wayne National Forest last Sunday. And they were nice enough to let me tag along. Not sure if I will fit in here or not, I only ride dirt?