motocat12

In case you hadn't heard re: the op, 4 executives dumped stock a few days after the hack was detected/reported to authorities..

also on the equifux2017.com people were entering test 123456 and it was saying, "yes your identity is at risk"

I heard on the credit monitoring depending on what you sign you may give up the right to sue or class action. Also it was offered for one year, then your identity info's still out there but they auto charge you for year 2. they may have gotten enough beef and changed the tune.

if it was the same bike then maybe

this radio shack one looks to be open or closed based on which spades you connect to. aaand radio shack is finally bankrupt out of town

why would they stamp both kinds all with the same number?

Wow, what a mess. hope the executives see some time. Can I call SS, tell them my card's been stolen and get a new number.

I ordered a ducati brake switch. before checking... it too is mirrored Looking at a ducati forum where they suggest an unsealed 250vac radio shack switch(dual side mount). it has 3 spades.... I bet these 1022 switches do too under the epoxy. my old open switch has wires coming out in different place than the new closed switch. The mirror mount tab thing may be an axial/radial lever "design".

was going to use it to replace the clutch switch preventatively. the clutch switch Also says 1022 but is a mirror image with the mount tabs on the opposite side

busa

My rear brakes (lights) were always on last week. I unplugged the front switch and they went off and the rear worked normal. Couldn't get the front micro switch working on a bench test. Ordered a replacement switch with the same number stamped on it. BUT it has a flexible metal tab that covers the plastic plunger often comes up as a clutch switch but I've seen them as mirror images with the mounting opposite. This one appeared to work when i tested it to see if if it mattered which prong when where after I removed the plug to shrink wrap it because the wire was a bit short. Then when I plugged it in the brakes are on normal and off with the lever pulled. I know there are normal open and normal closed switches But the Brake lever pushes the plunger by default and and releases with the lever pulled.

Buy another member's bike again before you change your mind and get the r6

zipties and lasers

That's how to fix a Katana 101.

Tonik's rear doesn't know the meaning of "working too hard" going in sideways on the other hand. A 4k bike may be ready for suspension work. So you bought tire too good for the shocks?

also try gearing the fz up in back for better acceleration and lower top 120+ speed(may need longer chain) or -1 front +2 back

sounds like the ignition

you may also be able to fit a quick turn throttle tube with a bigger cable radius so it feels like the engine has more in it at the throttle opening you're used to.

slap an r6 donk in the fz6

Was the clutch pack removed? positive everything is in the correct alignment? want another set of hands/eyes?

"***riders must be 25 years of age" keep doing free demos, but how is this ageist discrimination allowed in this day and age.

Consumer report say; all wheel drive not as good as (but better with) snow tires.

^Doe's his knee pucks not his kneecaps. Short bent arms...?

I've had luck with nylon flexible hose from dorman with crimp clamps https://www.amazon.com/EnDuraLast-FP-HoseKit-Flexible-Fuel-Hose/dp/B00LPX1JHY http://www.autozone.com/fuel-systems/fuel-line-repair/dorman-5-16-in-8-mm-x-12-in-with-barbs-flexible-nylon-fuel-line-repair/193135_0_0

I did better after I let some of the 40 psi out that I thought would be faster. Not on pure washboard trails.