motocat12

i had bent caliper bolts cause it once. there's fixed. floating, and semi floating. On some bikes as a last resort people will bend the spring washers out away from the rotor.

they're also known to blow through the middle of the hollow o-ring and have the bypass valve break and block flow

Chased a spider out of the steering nut. I think it was a black widow. One was dead and the other live.

2x4 in the spokes?

bought the above at micro center, the plunger is between the mounts instead of on the end like the stock switch and mounts are a bit off. Did a post op on the original switch. cut/melt the potting and you can swap the outside pins' wire and convert between closed open types.

These $11-15 boots will probably get removed or never sent....maybe he has several auctions. The same photos are also listed for $100 http://www.ebay.com/itm/Professional-Motorcycle-Offroad-Sport-Motorbike-MX-GP-Racing-Leather-Boots-Shoes-/192301277057?var=&hash=item2cc60c9f81:m:mC-vXU6A52-Z3LnrIGwkGRQ feedback sales are listed in $HKD not CH...

Pocket it for your policy renewal next year.

you're also comparing bargain brakes to sportbike radials... what would the SV abs do with gsxr forks?

pod save america

a coil spring, a minilock and these

so 143 million were stolen and the other 157 million have never had a job(or ssn)to qualify for credit. 1. have you had a job? yes .a you were affected no .b you were not affected.

Should tonik wreck an R6 on the street before he decides which bike he wants to wreck on the track?

you can unfreeze temp(ya punned)orarily even if you do want to use it. just ask the loaner which they check for credit

In case you hadn't heard re: the op, 4 executives dumped stock a few days after the hack was detected/reported to authorities..

also on the equifux2017.com people were entering test 123456 and it was saying, "yes your identity is at risk"

I heard on the credit monitoring depending on what you sign you may give up the right to sue or class action. Also it was offered for one year, then your identity info's still out there but they auto charge you for year 2. they may have gotten enough beef and changed the tune.

if it was the same bike then maybe

this radio shack one looks to be open or closed based on which spades you connect to. aaand radio shack is finally bankrupt out of town

why would they stamp both kinds all with the same number?

Wow, what a mess. hope the executives see some time. Can I call SS, tell them my card's been stolen and get a new number.

I ordered a ducati brake switch. before checking... it too is mirrored Looking at a ducati forum where they suggest an unsealed 250vac radio shack switch(dual side mount). it has 3 spades.... I bet these 1022 switches do too under the epoxy. my old open switch has wires coming out in different place than the new closed switch. The mirror mount tab thing may be an axial/radial lever "design".

was going to use it to replace the clutch switch preventatively. the clutch switch Also says 1022 but is a mirror image with the mount tabs on the opposite side

busa

My rear brakes (lights) were always on last week. I unplugged the front switch and they went off and the rear worked normal. Couldn't get the front micro switch working on a bench test. Ordered a replacement switch with the same number stamped on it. BUT it has a flexible metal tab that covers the plastic plunger often comes up as a clutch switch but I've seen them as mirror images with the mounting opposite. This one appeared to work when i tested it to see if if it mattered which prong when where after I removed the plug to shrink wrap it because the wire was a bit short. Then when I plugged it in the brakes are on normal and off with the lever pulled. I know there are normal open and normal closed switches But the Brake lever pushes the plunger by default and and releases with the lever pulled.