Turbotrio

That is why the customer buys the units from us. Any issues they might have get taken care of directly by me. No phone calls or stress -- just stop back down and we will have "Blanks" in stock to swap it out for. Any electronic devices can be "Buggy" which has been the case with every piggy-back or stand-alone system we sell. Over the past year we have yet to have an issue with a single Predator or Trinity unit so apparently DiabloSport has bumped up the Q/C department. Jeff

Because aside from a Ford "GT", this is pretty much THE Mustang to modify/tune and show not just how much more power we can add, but how much quicker we can get the car to go. Unfortunately, we just couldn't have that done by today because we are 10x too busy. It is 100% stock. I just worded it as "Stock" because it is hard to call a car with a $30k performance package added on as truly stock lol. Jeff

We were hoping to have the predator here in time so we could tune it and then add the parts to it that have been sitting here. Unfortunately we have been much too busy with other cars/projects to even dyno it stock until last night. We will get to it eventually... BTW -- it's not "Near" stock, it is 100% bone-stock at this point. The car goes 12.50's as it sits until she gets a MUCH stickier set of tires on it. The 20" Nitto's on it now don't help at all with traction. Jeff

Cage was finished Friday late and we picked the car up Monday. Just got the tranny yesterday: http://ipsmotorsports.net/pictures/MarkC6Z4L80%20(1).JPG http://ipsmotorsports.net/pictures/MarkC6Z4L80%20(3).JPG We have a week to be in Bowling Green, KY ! Wish us luck

Yes.

It is

Email me at: sales@ipsmotorsports.net and I will make sure somebody gets right back to you

This sale is good for any current CR member. $350 for any '89-04 car/truck that we will burn a custom chip for. For an additional $50 you can upgrade to a dual-map switch that will allow you to swap back and forth between tunes from inside the vehicle. $450 for any '99+ car/truck and will include a Predator programmer. Both include tuning and dyno-time on our AWD DynoJet. Please contact Mike or Eric at the shop to schedule at: 614-444-5884 or send an email to: sales@ipsmotorsports.net You can also PM me on here as well. Jeff

Nothing crazy in terms of numbers because his Zex kit that he thought had 100 or 125 jets was only putting 70hp to the wheels. I have no idea whats heads/cam the car had in it but it was just a clean / well put together car Jeff

Finally got around to dynoing the Super-Snake last night. "Stock" she put down: http://ipsmotorsports.net/pictures/Chris%20GT500%20SS.jpg Here are few pics of it on the dyno: http://ipsmotorsports.net/pictures/ChrisGT500SSdyno.JPG http://ipsmotorsports.net/pictures/ChrisGT500SSdyno%20(2).JPG http://ipsmotorsports.net/pictures/ChrisGT500SSdyno%20(8).JPG We will be doing a tune on the car just as it sits to see how much more we can get out of it and then will start adding parts and boost Jeff

Ill post pics of the graph in the Pics/Vids section but 652 or 656rwhp Jeff

Yep, very clean car I was glad to hear you picked up so much power over the mail-order tune too. Thanks for stopping by! PS -- Getting to watch the Super Snake dyno was just a bonus lol Jeff

That would make a fun car for sure! We are in the middle of a 3.4L / SC install on a FWD 3000GT customer car so that will be interesting in terms of power capabilities. Nice looking conversion and great pics! Jeff

I honestly don't remember but Eric can toss up the details when he gets in this morning Jeff

Customer of ours from WV that stopped by to get his car tuned. Brandon ported his FAST intake a couple months ago when his friend picked his car up (Also a C5Z). Very clean H/C and spray (100-Shot) car that made good power and was nicely modded IMO: http://ipsmotorsports.net/pictures/ChadBc5Z.JPG http://ipsmotorsports.net/pictures/ChadBc5Z%20(2).JPG http://ipsmotorsports.net/pictures/ChadBc5Z%20(3).JPG http://ipsmotorsports.net/pictures/ChadBc5Z%20(4).JPG http://ipsmotorsports.net/pictures/ChadBc5Z%20(7).JPG

Nothing crazy, but a clean GTS with a Roe SC Kit and a few bolt-ons. I didn't get permission about posting a graph (Forgot all about asking him about it) so we will just say it made more than 600rwhp End of the season he is bringing it back in for a full engine build and heads/cam upgrade. http://ipsmotorsports.net/pictures/JoePscViper%20(1).JPG http://ipsmotorsports.net/pictures/JoePscViper%20(3).JPG http://ipsmotorsports.net/pictures/JoePscViper%20(5).JPG

+1 for Visodence Thorne and his guys did an incredible job from beginning to end. The pricing on both the equipment and install was more than competitive. We have called them at 4am asking for help and not only did they actually answer the phone, they came down to help us with the video footage in person. Cameras are 100x better than the ones we used before (Even at night and in the snow/rain) and the system has more than paid for itself already. He can order whatever parts you want (In terms of the quality of camera/cables/etc), but the service is what sets them completely apart IMO Jeff

Congrats on the move How many Square Feet is it? Jeff

I have two lenses left over from my Nikon days that I need to sell. First is a Tokina 12-24/4 wide-angle lens. Last I saw his lens line-up Hua uses this lens for his wide-angle shots (Just to use a local reference for those not familiar with the quality/brand). It comes with the original box and hood / caps / paperwork. Perfect condition. I paid $500 and looking to get $375 for it. Info here: http://www.tokinalens.com/products/tokina/atx124prodx2-a.html Second is a Sigma 50-150/2.8 APO EX lens. This is probably the smallest 2.8 lens made in a medium-tele range. Very fast and great for low-light situations and easy to carry around due to its small size (2.8 70-200's by comparison are typically huge). Lens includes original box and hood / caps / paperwork / padded pouch. Perfect condition. I think I paid $650 for this one and would like to get $450 for it. Info here: http://www.sigmaphoto.com/lenses/lenses_all_details.asp?id=3338&navigator=6 If you have any questions or want to try them out in person shoot me a PM! Jeff

Yeah, it was very nice meeting a bunch of you that I haven't had the chance to before. Great weather, nice meet, and looking forward to coming out again for the next one Jeff

Yep, we set-up an account with them 3+ years ago that we only ever use for Mod parts. They have *Decent* discounts on that stuff but GM parts and most other app's aren't very competitive as they don't focus on it much. Jeff

It is a great looking car that gets a crazy amount of attention. Two other GT500 owners have stopped by from it just sitting in front of the shop in the past week I honestly think it got as much/more attention then the Z06 did at Kilkare. Jeff

We haven't dynoed it yet but we will before the mods begin soon Jeff

Because the event we are trying to get to is in 2 weeks and his cage just got done yesterday. Engine and Tranny (Both upgraded) will be here tomorrow. So in the following two weeks we have quite a bit of work to do. Then, after everything is in and running and tuned and ready to go, he still technically needs to get his license which takes some track passes. Jeff

Right, I just making a comparison with a very stock-ish '08 (Turbo) as compared to an upgraded blower set-up on the earlier model. Turbo >