Mattsv8

No it has manual brakes i want one for the engine. the 357 has low tension rings and its gettin some blowby under boost

Anyone know where to get a electric engine vacume pump jegs used to carry one but dont have it any more i need one for the s10

i know it will go 8s. how far into them will be the question

i bought a 4x4 for a reason bring on a blizzard. sweet

im hoping to have it done by spring but im deff not pulling the 357 out untill its complete.then the 357 will go into the camaro. the main thing that will slow the project down is getting the 2400 up for the heads. pistons are 720 and rings are 150. im getting the belt drive fuel pump when it comes in hopefully next week. I have to get the plumbing ran from the turbo to cooler and cooler out to carb also. i cant weld alum with my tig so if anyone can shoot me a good price. im hoping to install it behind the dash so the dash will be out of the way. and i can drill the holes to go into the truck with the 3.5" tubes. Im hoping it will pick up et and mph with just the belt drive, Liquid intercooler, and actually having enough fuel. then i plan on upping the boost to 20-25 lbs. wich hopefully will net somewhere arround 1200s motor. im also adding in a wishbone locator, and drag race anti roll bar to try and get a little more 60ft.

Hey guys ive started to piece together the new setup. since ive been leary of my stock block 357 going as fast as it did and the amout of boost it was seeing. the goal was to swap blocks and go with a dart little m and add the 357 rotating assy into it. but i decided that motor is better suited to the camaro. so im building a whole new setup. motor is going to be a straight up 400" motor. Dart little m, 3.75 stroke crank, 6.000" rods, je extremeduty turbo piston for std deck 9:1 comp, AFR 235s, comp cams dry belt drive, new custom lunati roller. proably arround .700 lift and mid 270s dur. plus adding a new liquid to air intercooler system, way more boost, and a belt drive fuel pump. Im only doing a 8.50 cert so ill have to slow it down for some tracks. hopefully ill get to rip off one good one at super chevy. im going to try and get a muffler on it to get into true street heads up there. im also seeking sponsors that want there name on a very fast billboard! im taking it to as many heads up races as i can find and get into. also gona run some points races here local. and a few larger car shows. so far i may have TCI auto on board for a powerglide and converter. Fast may sponsor a fuel injection setup. but im going to stick with carb for as long as i can. I still have to buy Pistons, rings, vacume pump, belt drive pump, belt drive brackets and mandrel already on way from waterman racing. and heads, shaft rocker setup, and small misc stuff. I dont mind paying for all of it myself I always have but any help would be great. some pics to start the build. http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4383.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4382.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4381.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4379.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4377.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4376.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4375.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4368.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4367.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4366.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4365.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4364.jpg http://i33.photobucket.com/albums/d71/Mattsv8_03/SSPX4360.jpg

thats not too bad. mid 4s would be great for a light car

sometimes i want my turbo eclipse back then i remember i had to rebuild the tranny once a week. so i get over it. i kinda wish i would have kept the other 89 blazer. but i like the new one way better.

how do you break a 9" ford over and over? u using stock carrier

i like the iroc z concept car better

ill shoot for the 8.50 class i guess.

that thing is really loud in the video.

so whats that beast make. thats a huge list of mods! glad i own a v8. where money equals power.

Yes ill b making a 7.90 pass this year! go glory pass go

that sounds like a car with a small cam in it. kinda nice.

welcome the only thing i can see it needs is lowered they look too much like 4x4s

love it thanks ray

mattsv8 9.19 at 147.65 1.353 60ft 82 s10 long bed 9lbs boost t88 and e85 pump i hope thats the right order. and thanks ray for getting this going again. http://i33.photobucket.com/albums/d71/Mattsv8_03/919passfromscanner.jpg

very good intro and nice camaro.

Wow i cant beleive this might happen id b willing as well. it need to b done with proof time slip or video. and some way to link to it.

well i cant do it cause im not a moderator. but i hope somone wants to do it. i thiink me and mark need to line up at the next cr meet. as long as i got the truck] back together and his car is done

that would work. i wonder what it would cost?

just run straigth meth in the motor. that will get it done

i think we could broden it to allow like a top 50. since arround 80 attend each cr meet. maybe it will draw more people out. and i like the idea of setting up races with cars of similar ets. make it more intersting.

yea that seems good. the more straight forward the better.