y2k2gt

I want one, but your pm box is full.

No worries from me. Guys should all get slicks and line up in lanes 1&2.

3 hours for 2 passes... Staging lanes were backed into the pit area.

Figured I make some passes before track day. They were only running the 1/8 at first. It was very windy. My second and last run was the 1/4 and I didnt break anything.

I did my homework and studied up on E85. That's all I've been running the past 2 years. General school of thought is out when it comes to E85. If there was a ptv issue it would even hit a dished piston.

To make more hp.. It was 12psi and the car ran 10.30's in the 130's at this setting. I short shifted from 1st to 2nd without getting in to boost until it was in 2nd. It broke the 28" M&H drag radials lose at 5500rpm and I then shifted to 3rd. You cant see wheel spin by watching the speedometer. I have a th400 transmission and I set the speedometer to work off the front passenger abs ring. You can see the rpms jump at the 6 sec mark when it spun and thats when I hit 3rd. At the track I shift at 7200rpm.

I got it all back together and this was how I broke it in yesterday.

The Edelbrock intake before and after. http://i160.photobucket.com/albums/t165/y2k2gt/imagejpeg_2_4.jpg http://i160.photobucket.com/albums/t165/y2k2gt/imagejpeg_2_5.jpg http://i160.photobucket.com/albums/t165/y2k2gt/imagejpeg_2_2.jpg http://i160.photobucket.com/albums/t165/y2k2gt/imagejpeg_2.jpg http://i160.photobucket.com/albums/t165/y2k2gt/edelbrock2.jpg http://i160.photobucket.com/albums/t165/y2k2gt/edelbrock1.jpg

I ran into a snag assembling the shortblock. I found a broken off headbolt in the block. I bought a time sert headbolt repair kit and fixed it. I then broke a arp headstud down in the block on the other side. I drilled it out and didnt get the insert installed right and it pulled right out when I torqued it to 90lbs. I the drilled and tapped the hole for 1/2 thread size. I bought a piece of 1/2 all thread and cut off a section the length of the threads on a arp headstud. I then tapped it for the 11mm 1.5 thread size and inserted it in he block and it held. http://i160.photobucket.com/albums/t165/y2k2gt/IMG228.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG229.jpg

I've built a .030 teksid shortblock with manley flatop pistons, cobra crankshaft and manley h-beam rods. The crank and rods are the same ones I've ran since 05. I have a fresh set of ported PI heads with all new valves, valve seals, valve guides and high load valve springs. I'm running the same custom cams that are 230/230 .560/.560 115lsa. I also had my edelbrock intake ported. http://i160.photobucket.com/albums/t165/y2k2gt/IMG175.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG178.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG171.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG186.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG180.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG179.jpg

I will require a $200 deposit and return $180 when it is returned. Not trying to really profit.

I have a eastwood fender roller. I'd be willing to rent it out.

I'm in.. http://i160.photobucket.com/albums/t165/y2k2gt/IMG230.jpg

http://www.cgfabrication.com/shop/article_38/4.6-2V-Turbo-Street-_-Drag-Kit.html?sessid=POP3JxrIRIsrYgnfJqYPguyrkuENQOuzhsIdTgUMeVuYixBpNQVBOY8hmszC5Mqj&shop_param=cid%3D5%26aid%3D38%26

Kool looking friend. Meth is great as long as its spraying):

Everything is sold

E85=more hp... I run it with 80lb injectors. With E85 you dont have to worry about how much boost you running.. Do you have ported heads. The heads I've been running the past 3 years are available right now. I'm building a new engine and using my "stock" heads again.

Awesomness!!

I have a 08 4 door Ram with the Hemi. I'm also a ford guy, but love my Ram. http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20110704_193119.jpg

Pistons are sold

$375 http://i160.photobucket.com/albums/t165/y2k2gt/pistonsbox.jpg http://i160.photobucket.com/albums/t165/y2k2gt/pistons.jpg

They are new in the box with pins. $400 KB Boost a Spark--sold $150 SCT chip burner & chip and cable $320

You'll be in the 10's next year.

That was my best pass at kilkare.