y2k2gt

I have a a1000 regulator with two -6 fitting and a -8 for the return. $100

I have a couple low mileage 03 cobra pumps. One of them will work just fine.

N0 it was not in my car. One could take it apart and put a cobra crank in it. The cast crank will support 600rwhp.

http://www.columbusracing.com/forums/showthread.php?t=112549

Oil pan no longer comes with. I will include a new set of rings. $1500

I have the one that came off my car. It was taken off the same week I bought it in 02. I did cut it.

r/t .008 60' 1.61 330 4.46 1/8 6.79 mph 106.36 1000 8.87 1/4 10.89 mph 104.82 LOL

I have not yet got used to the power my car makes.

I have a teksid block that is .020 with a stock cast crankshaft, custom diamonds 9.3 compression with valve reliefs, modmax h-beam rods with arp 2000 bolts, arp main bolts, windage tray, canton 7 quart oil pan, arp pan studs melling oil pump, water pump, rear cover, aftermarket freeze plugs and a arp balancer crank bolt. Modular performance built it and it was ran under 10k miles. It has steel top rings and they weren't seat correctly so it had blowby. It needs a light hone and new rings. http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20130528_190740_553_zpsf2ef9496.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20130528_190754_298_zps94e7a6b9.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20130528_190929_145_zps374dab9f.jpg $1800

This setup was working great. I just wanted to run a single pump, so I pulled this off my car and now run a single fuelab pump, The Real 044 pumps have czech republic on the side, as there are fakes being sold. I will come just as shown in the pics. You'd only need to make one short -10an hose as I used the other one with new setup. I will include a small section of -10an line and you'll have to buy two straight -10an fittings. They are around $10 each. I have over $160 in the fittings that are included and the pumps run right at $200 each. These pumps are pretty quiet also. Two bosch 044 pump with -10an feed and -8an outlet adapters -10x2 -10 y-block -8x2 -10 y-block two -8 couplers one -10 coupler one -10 to -10 line one short piece of -10 line $325 shipped http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20130519_083543_101_zps0985f29d.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20130519_083602_668_zpsf4bcdebd.jpg http://i160.photobucket.com/albums/t165/y2k2gt/IMG_20130519_083516_367_zps57287028.jpg

This best of the day and I got out of it. I did get my best ever 60' at 1.46 on another pass. I was running 12psi. http://i160.photobucket.com/albums/t165/y2k2gt/2013-04-27_20-18-13_702_zpsd6b86cf6.jpg My stock 07 GT went best of 14.10@97

Got 10 gallons today from kroger on holt rd. It tested 82-83%

4v vs 2v on low boost

I have a trailer you could borrow for a small fee, but I live in ashville.

Would you sale the front wheels separate?

sold

$425

bump

These are brand new never installed. They make about 9.5:1 compression with 52cc chambers. The pins and rings are new and unused also. They are stock stroke http://i160.photobucket.com/albums/t165/y2k2gt/specsheet_zpsfdade4cf.jpg http://i160.photobucket.com/albums/t165/y2k2gt/2013-01-12_12-05-19_929.jpg $475 shipped

Kool build

Yes

Interesting..I didnt receive a refund.

My extra hotside for a 2v. http://i160.photobucket.com/albums/t165/y2k2gt/DSCF4024.jpg

But, you didnt pay for the spot??

I wont have my car ready in time. If anyone want my spot for $40 pm me.