gillbot

If it's an easy enough swap i'd opt for the cheap one expecting to replace it sooner rather than later. If it's a harder swap then look for a better unit. I've bought cheap stuff and "better" stuff from Rock Auto in the past and could rarely tell the differences in the parts aside from cost. Now I opt for the cheap stuff if I don't care that much or they are easy to change, otherwise I go to NAPA or somewhere I can see it before I buy.

I remember that car from the times you brought it to cars and coffee. I can't see any reason for BAT to reject it just on how clean and well built it is.

 

a used 2013 FR-S is like $17K right now with really low miles. I'm guessing that there isn't a transaction so simple you would take that little amount for your special hot rod (If I am wrong I'll be over with a check at the end of the day ). It needs a market where it can find the right buyer who appreciates the work put into it and is willing to pay that. BAT is one avenue, FB groups for the FR-S/BRZ are likely another, maybe Ebaymotors (but I haven't had much luck with them lately).

 

This is the key, otherwise you are going to get every tire kicking joe offering you low blue book for the car. Even some of the more niche groups will end up beating you up because they way YOU built it isn't they way THEY would build it, etc. I went through this when I sold my Camaro years ago and ended up letting it go for next to nothing to just move it.

https://www.combatarmory.com/radical-firearms-complete-ar-15-lower-receiver/

 

Radical Firearms Complete AR-15 Lower Receiver

Was: $209.99

Sale: $99.99

THIS is where I have obtained some ammo from.

 

Nice quality. Not the best priced, but usually available.

 

KillJoy

Freedom Munitions has their BF coupon active.

 

USE CODE

FREESHIPBLK

AT CHECKOUT TO

RECEIVE FREE SHIPPING

ON ORDERS OVER $250. MAX $3.000

 

Plus some items are 5% off as well.

Rural King is decent for ammo too.

https://gun.deals/product/tulammo-9mm-115-gr-fmj-steel-case-28381

 

Steel case plinking ammo

TulAmmo 9MM 115 GR FMJ Steel CASE 1000Rnd - $283.81

I beat them up pretty good back in the day.

 

1000 of 9mm shipped for $180

200 rounds of Hornady 6.5 CM for $145

 

1000 rounds 5.56 for $325 shipped

 

I’m ready to see that pricing again.

 

Every time they'd hit those magic numbers for me i'd buy a case or more. :megusta:

I’ve seen 9mm for 300/case but it usually disappears quick. Rural king has been decent but prices are still a shade inflated, but I expect that to continue as people continue to hoard and panic buy.

I haven't seen deals on ammo all year. I check AmmoBuy and AmmoSeek daily. I have predefined searches on 12 gauge, and 209 primers saved on my favorites. Anything in particular you're looking for? I'll keep an eye out.

 

I've been watching ammoseek myself but nothing, only thing I have been waiting patiently for is 209 primers.

I’m the oddity today I guess. The 4 doors don’t do it for me, Jeep or Bronco. 2 door only club here.

I saw a 2 door Bronco out in the wild, not bad at all. It would make OJ proud!!

But doesn’t the seller pay the fees similar to how they would pay a realtor, just a lot less?

 

Not unless agreed upon. My neighbor is paying for their own attorney and paperwork, the seller theirs.

If it’s low volume, can’t you get a hydraulic press and make them yourself? I can’t see any shop wanting to do the tooling work for something that you didn’t design.

What's it like to be rich?

 

More than you can afford pal……

 

https://www.pinterest.com/pin/848436017285187079/

I’d drop 150k pennies on a Chevy sure.

That is what I assumed would happen but haven’t herd anything or read anything yet on when you can actually place a order for a 2023 .. which I don’t mind waiting for and understand that it could easily actually become 2024 before delivery lol

 

The dealers can answer these questions. They’ll know when the info is released if they will run extra for “22” orders, they’ll make a double run for all orders of 22+23 or whatever

Yes , however a lot of people already have pre orders in as it was going to be a 2022 production car. So with that being pushed I am curious how that effects anyone does the 2023 pre order

 

The 22 orders will get the first run and they’ll likely add 23 orders to the end of the queue. If it’s a batch or limited run, “extra” orders will get bumped to the next.

I’ve ordered several cars, usually any decent dealer can get you the info (as they can) and will guide you through the process. It’s pretty simple IMHO, just go to your preferred dealer and talk to them.

 

As Steve said its basically Mossberg 500 vs Rem 870 as far as the "standard" for Pump action shotguns.

 

:gabe:

 

And the debate rages on as seen above. :lolguy:

I thought what happened in Ant’s basement stayed in Ant’s basement…….

130 dollars to fill the tank last week... can get to the cost of a beater pretty quickly

 

Add in the cost of shitbox maintenance, insurance plus unknown beater issues and that price will climb fast. But sounds like your mind is already made up, you are just looking for people to agree with you.

I always kept them locked on my Camaro for this very reason and still had one pop at the track. Got subframe connectors right after that happened.

My neighbor is buying one FSBO. It’s been a giant fucking hassle because the seller is a dipshit and now they wish they went through a realtor. They have a real estate attorney and they are also tired of dealing with the dipshit seller and are ready to drop everything if they don’t finalize soon.

870 > 500 every day of the week! But, I'd rock a 500 for free!

 

The very first firearm I purchased was a Maverick 88. The thing was a jam-o-matic. Other's mileage may vary.

 

KillJoy

 

PS - .410 :lolguy:

 

My Maverick 88 has been as reliable as my 590A. I got my 590 and Mav88 both for less than the average price of an 870. ¯\_(ツ)_/¯