88lx5oh

huuuuuge improvement. but eventually ill be buying an MGW

a few more things got ordered or installed. ended up ditching the steed shifter base bushing in favor of a Full Tilt Boogie shifter bracket, and shift arm bushings. got my ARP Flywheel bolts and McLeod Lightened steel flywheel to go with my McLeod Twin Disc Clutch. Tomorrow i head down to pick up DSS Half Shafts at Carlyle Racing. i talked with Travis Boundary @ Boundary Engineering today about his Chromoly Billet oil pump gears, and ill be ordering a set of those, but asked him about lower timing gear/crank gear, which at the moment he does not make, but after talking with him, and explaining the need, and the want from a lot of coyote motor guys he is going to start the R&D on it, so ill be getting that as well when it is finished. so in about a month or so, the car will get torn down to start putting the new parts in, and will only be a set of drag radials away from making some passes at the track. which i have already been talking to Derek about the Nitto NT05R

lol nope, top speed is about 70mph, so yeah you miss a lot of grass.

yes, the xxc is 60" its the only Maverick that you can get in a 60" and for some reason the charge more because of that radiator was relocated, because all the can am side by sides have issues with over heating if you get into mud. radiator clogs and then it will go into limp mode to protect the engine, great concept, as you can't overheat the engine, but if it goes into limp mode at the wrong time your screwed. it pulls 90% of the power out of it. i tried several things before i relocated, and never could get it to stop over heating if we did any mud at all. since i moved the radiator to the back, it runs cooler than ever, and never had a bit of problem with it. wish i would have done it as soon as i bought it. i also have a fan override switch as well for good measure.

Thanks guys.

2014 Can Am Maverick XXC, under 500 miles EMP roof, EMP rearview mirror, EMP aluminum skid plates, Stereo, 34" LED Light bar, two 4" LED lights on the bumper, Blingstar aluminum doors, ITP Blackwater EVO tires, CT Raceworx HD tie rods, EMP Chassis brace/hitch receiver, Gates Carbon Fiber belt, 4500lb winch, radiator relocated, fan override switch, Slip on Exhaust, Can Am Harness bar, Pro Armor 4 pt harnesses, Denali 72" plow, 60" pull behind Swisher Mower $13,000 http://i1101.photobucket.com/albums/g425/hobglide/97B6B6A9-D493-4438-8A89-F8A5C1955F5B_zpswrowazhd.jpg http://i1101.photobucket.com/albums/g425/hobglide/C25CD076-924C-421F-93B6-1BB17B41C679_zpsi1nrehhe.jpg http://i1101.photobucket.com/albums/g425/hobglide/30044A28-9257-4854-B17F-FCB6BC389BD0_zpsufjyuhsn.jpg http://i1101.photobucket.com/albums/g425/hobglide/89B059F0-2D56-4198-8EEC-282D69159C84_zpsmzi6vrf0.jpg http://i1101.photobucket.com/albums/g425/hobglide/B3F353CC-9346-41B2-8944-618A9078B527_zpsstfij7bh.jpg

thanks Clay, i needed some stuff for the winter beater!

awesome job Brian

you never know, rossi has pulled some crazy things out of his ass. he won't sit back and let the championship get away from him. either way he will give it his all, but my fingers are crossed that his appeal goes through and he gets a legitimate shot at it

you deserve all the success you have had. Ive known you a long time, and you have always busted your ass and had much success in your business, all while staying very humble. you treat your customers better than any other business I've ever come across, you will go above and beyond expectations. You truly are the epitome of customer service. i appreciate all the questions you have answered, all the great advice given, the easy willingness to meet my schedule, and the amazing tune on the car. If i ever need anything tuned, i won't look any further than you. for the past 10 years if anyone asked me where to get their car tuned i always recommend you. your a stand up guy and not enough good things can be said about you and your business. thanks for being a good friend and a bad ass tuner. i love seeing Brian get all hyped up when the vehicle he is tuning starts making some good power. i believe tuning is a drug to him

9.74 @ 143

I'll see next year when it has Drag radials and half shafts

so 50/50 mix then? i think thats what the boost juice is

I've been talking to dyno Brian about it already. Winter project for me, snow performance meth injection kit, ngauge, and back to the dyno in spring. You gonna run 50/50 meth/water? Maybe we should go halves on a drum of methanol 😊

10, 304 stainless 72-80mm T Bolt clamps (2 need nuts as i lost them lol) $20 http://i1101.photobucket.com/albums/g425/hobglide/15074900-8DBF-47FE-B2B7-11D4877505C9_zpsvps3besi.jpg http://i1101.photobucket.com/albums/g425/hobglide/D659E630-3030-4B6A-99C3-C6468AFE3D0E_zpselfgof3i.jpg 3.5" - 3.75" silicone 90 degree hose, $15 http://i1101.photobucket.com/albums/g425/hobglide/12898F85-51BE-40E0-882F-2873A75D715B_zpsmb3rwufn.jpg http://i1101.photobucket.com/albums/g425/hobglide/46F20E9C-CF91-4A25-B5EB-133E9DC01E03_zpszcpchhhf.jpg Stock 2015 Mustang GT injectors, only on car for 1400 miles $80 http://i1101.photobucket.com/albums/g425/hobglide/5D9D4545-6C3A-4FD3-8A3E-F0CDA2CAB393_zpscnejzf2j.jpg

oh man, I've been looking at the snow performance meth/water injection. i think i like that route better than e85, for the fact i don't have to find an e85 station

McCleod sent me something http://i1101.photobucket.com/albums/g425/hobglide/D16E2CCF-7ACE-44C0-AF45-0B972684D2D2_zps3mtgo3yq.jpg Now just waiting on my flywheel and arp flywheel bolts

yeah good thing its still under warranty, ill be taking it to the dealer soon to get it looked at

Once I get traction issues taken care of, may have to talk to you about going corn fed

I'll be around $8500 after the clutch upgrade. Dyno Brian said on E85 the car would make 700rwhp easy on the same boost. So if I want more power, it's there even before a pulley swap.

We should still make a run or 2

P.S. Clutch is on the way! so far no slippage from the stocker though lol

thanks guys! it is amazing to drive. and yes out of boost it drives like stock.

Results are in! big thanks to Brian Turner, he did an awesome job! car runs great and pulls really hard! 631.4 RWHP 526.6 RWTQ video is uploading http://i1101.photobucket.com/albums/g425/hobglide/F2E788F9-967C-4D4D-8968-5DC1A21B714D_zpssypzeqzz.jpg http://i1101.photobucket.com/albums/g425/hobglide/14E0B568-E7F3-4E98-B4BB-7551951BD48C_zpsssoaumfa.jpg http://i1101.photobucket.com/albums/g425/hobglide/AAB3468E-6D56-4C2C-AD4F-562BD3C25529_zpsf7uk1jdw.jpg http://i1101.photobucket.com/albums/g425/hobglide/8ADFD0CF-1C2E-4CEA-904F-1A8BE2CDEFB5_zpsmwwuijcq.jpg http://i1101.photobucket.com/albums/g425/hobglide/C29E184E-386A-4AC6-BB4B-9FCA3BB7941F_zpsu41xz1hn.jpg