Brandon

they were on slick guns (gen 2 albelit) for like 7.97 a mag for 10... I bought 10 FDE mags for 9 each shipped to my door from heart-a-tac, and then got a bag and 6 more pmags (gen 3) from PSA for 80 dollars... They can be had cheaper iMO

Here is the ammo deal some specifics - http://s11.postimg.org/fkz1txn2r/image.jpg 9mm 115gr copper projo, mil spec lead primer, brass FMJ, factory pressed not reloaded. Good training ammo - boxes of 50 only sold per 1000. If you want to get some just let me know - ill give you my cell in PM's. Its going fairly fast from the wholesaler...just a heads up.

We shot it recently its good ammo - FMJ, I will get shots up of the ammo and a report by weeks end, just wanted to leave a tip here...

Are you trying to make it look like this ?http://iris.backcountry.com/image/view/c85201/900/900 Could do that pretty easy from that shot (not to say easy to you with out the tools) - pick the wood you want to stain it, make some cuts, router the edges make a cleat and hand it on the wall.

If any one needs some 9mm ammo I found a GREAT (Lowest I have seen in some time for brass) price in bulk orders - I had order 10k rounds though to get the minimum order... I am going to try and resell some of it, as I don't need a stash that big but here are the specs. I will post some pictures later All new brass 115 gr 9mm - $255 per case (1000 rds) no shipping no tax - 25 cents a round for NEW brass. Good plinking practice target shooting ammo for certain. Best deal on slick guns or anywhere on similar ammo that IS NOT reloads is 28.5 to 30 cents a round. Saves 40-50 dollars a case. I have about 5 cases I would like to offload, so Ill give members here a first shot so to speak.

I like that lower, billets are pretty cool. Nice setup!

Good luck, you're going to pay a premium getting it in town. I just had to get a blower inducer motor for my furnace (luckily when it warmed up.) I went here http://www.lennox.com/locate/dealer-list.asp and called a few columbus shops, found the part for 4x what it was on amazon for same day pick up... I have prime so I got 2nd day, and ran the fireplace on blast and two heat dishes kept the house comfy while I waited for the 150 inducer motor, vs paying 420...BUT it is pretty cold now...

Didn't Roush have 3k trade in and 0% on new hondas? I know Lindsey always has 0% deals as well.

Holy cow. I would have never realized you ever weighed that much. Work out with Gaslin at NW

Money. A "other" registered lower, and or "pistol" lower receiver.

just got ten pmags (30 round no window) from these guys for 92 shipped http://www.hartatac.com/

It will sell for that price. He did get and insane deal...for the invested amount. He did not just get the car. I sold cars to a few other seas folks that had WAY less in them and proven for 50-60... He is in the wrong market I will agree with that being on craigslist.

Ed didnt buy it to race it... Purely to make money. He got the whole deal from Terri on the cheap...

wooooof

sure isnt ips has/had the same problem...

More like middle school morons. - Braxton gets sacked again on the next series - I will bet on that.

Why get mad, if they make a stop its just un excepted joy, sort of lie Braxton Miller not getting sacked.

I will try and see if I can dig some up -

yesterday legs day warm up jog 5-10 minutes Superset Free Squats - 225 x 12 x 3 Hack Squat - 205 x 30 x 3 Free Squats - 275 x 8 x 1 Hack Squat - 205 x 30 x 1 Free Squat - 295 X 6 x 1 Hack Squat - 205 x 30 x 1 Free squat 315 x 2 x 1 Hack Squart - 205 x 30 x 1 Then Step on the stair mill - 3 minutes max level 20 Walking lunges 50 ft with 60 lbs (2 30lb kettles) Repeat with essentially no rest for 3 sets The double step stairs on the mill level 10 focus on push No weight lunges 75 ft Repeat for 3 sets essentially no rest Sumo dead lift on rack lowest pin 225 x 10 x 2 245 x 8 x 2 265 x 6 x 2 Super set Calve extensions - 21 reps, 7 half bottom, 7 full , 7 squeeze at the top Hamstring curls 90 x 12 x 3 Then for good measure I pedaled on my trainer at home after for 45 minutes... I slept great.

6'1" Weight - 170-185 (right now Im as heavy as I have ever been consistently 185) Max Bench Press - 365 llbs , although I do not go for max weight efforts often, I prefer using bands and chains for 2-3 rep max effort pushes... Max Dead Lift - 315, I just go into dead lifts, I see SO MANY with poor form it irritates me. I use a method of both overhand, no belt, and hinge at the hips, and I take the weight back down in a controlled manner. I know I could do a fair amount more with a over under grip and a drop, however I have no interest in heavy deadl ifting, I purely like it for control. Max Squat - Free weight 315, Hack squat around 450 or so IRRC. Again I never go for max reps here either, I will use bands and chains and do 2-3 rep maximum efforts with a lower weight. Squatting is a huge natural movement so I focus my chicken legs on absolute form over absolute "grunt".(I also have "chicken legs") Any more I have switched a lot of my weightlifting work outs around my plans to race my MTB this summer in a Ohio series. Example lots and lots of squats then I step on to the stairmaster do 3 minutes no rest back to squatting, take 1 minute repeat. Same with deadlifts ect, I keep my heart rate up and simulate pedaling motions and building strength and endurance. Maximum strength helps me none in racing. I pretty much do circuit exercises with the other body parts every other week, and or do some focus lifts, then a circuit to finish out. Goals now are for once a diet plan in February, NEVER have dieted other then gorging. I would like to be 175-180 racing weight, dont need to carry around more mass then necessary. Here is me in Hawaii in July...Drinking of course. Hadnt worked out for 3 weeks...Opps. (Note I normally dont take much time off, however we were there for 2 weeks and the week prior I slacked) Oh and if you want to "look BIG" get a tan, fuck I am pale, a few guys I train with who try and get me to do a show do that rub on tanner, they go from average looking to like a bauce in 20 minutes...Pretty crazy what some shading does. If any one wants to train some time, i train at metro fitness I always like giving my two cents and of course seeing other methods.

I have a (currently disassembled) Brunswick 3 piece slate poor table I need to sell. I have had it for about 4 years sitting in the basement taking up storage space. Initially I thought I would put it up and just never really got into it. The Table is is great shape when assembled and is a quality table. It was made in Cincinnati back when brunswick was still there, its a short of "nostalgic" table. The slate is in great shape no issues at all, you just have to re-felt the table once you assemble it, pretty standard. I have two seats of balls, around 10-12 ques, chalk, racks, ect to go with it. Pretty much you get everything you need to make it happen! http://i41.tinypic.com/voxypx.jpg http://i40.tinypic.com/104jk9x.jpg http://i39.tinypic.com/2r6ck1x.jpg http://i39.tinypic.com/5k0xag.jpg http://i39.tinypic.com/15543mq.jpg As you can see it used to have a red felt, I didn't take off the reminenets on the slate... I would prefer a pick up if possible, however if you're inside the outer belt I will deliver. I would like $400 OBO - Not really looking to trade for much just as a FYI as well. PM me if you would like to set something up. Thanks

would if I needed those rounds... Need moar guns now!

Have you shot those rounds? Decent for just range and target firing? Bought 11 boxes for 143 picked up - ...

Bob - did they have any 9mm?

Kauai is my favorite island. Went to the beachs around the Hyatt - its very nice on that part of the island. Get to the Napoli coast - Favorite gift thus far is seeing how excited my wife was when we found out we were having a little boy (in May). And of course a new gopro, surround system, office chair, ect ect ect