BrianZ06

Thanks guys will check them out.

I need to find a piece of flat steel.I will be using this to extend my trailer gate. Measurements are 3/16 thick give or take. 6-8 inch wide and 6ft 4"long. Where would I buy something like this ?

You know its bad when it cost you 40 bucks to fill your lawn mower up. http://i216.photobucket.com/albums/cc178/1fstws6/100_1789.jpg

That is crazy. I have restored a few old cars and this thing is a basket case. It gave me a good laugh.Chrome oil pan ????

Sold

That's ok I would not be able to get out until later one way or the other only because I have to work till around 3 and by the time I get out and about it would not be till later anyway if I even feel like it( long week). Besides I'm sure we will get rain and if their is a chance of the wet stuff it will be a no go for me.I'm signing off talk to you tomorrow.

Brian if the weather is decent where will you all be going after you meet at 3:00. I might come out later if no rain.M/T Drag radials+3.73's+3400 stall does not mix good with water unless it is in the water box at the track. You know what I'm talking about.

Dig races is the only way to race,IMO. Street racing is not my thing either the consquences are not justifiable. Even though I have done it a few times I try to resist the urge. Brian have you put those wheels to use yet ? 01 WS6,228/236,578/588 114 custom comp,ported/polished factory heads w/manley race master valves,978 dual springs,Comp titanium retainers,hardend pushrods,160 stat,MSD,NGK,SLP bellows/mass air,ARP ,BG ram air,3400 midwest stall,DTS 12 Bolt 3.73,Spohn rear sway bar,QA1s,BMR rear susp,Macs,ORY,Magnaflow.

Yes it has brakes on the rear axle. They have not been used by me though the guy that had it before me cut the wires at the drum. Their is plenty of wire left to splice a new hook up on.

Anthony, I think our cars are to long for this trailer. The trailer is 16 foot inside and our cars are over that. I have hauled a 79 TA and 56 chevy but they may be shorter. It is hard to get in and out cause of sides as well. http://i216.photobucket.com/albums/cc178/1fstws6/Picture001.jpg http://i216.photobucket.com/albums/cc178/1fstws6/Picture006.jpg http://i216.photobucket.com/albums/cc178/1fstws6/Picture005.jpg

Photobucket is giving me a hard time loading right now. Should have them in the morning,its probably my connection speed right now giving me problems. Talk to ya tommorow.Us old guys should be in bed anyway.

working on it right now. You want to talk old,LOL. I just turned 40 something may 1st.

Hey Scotty this one wont let you down. http://i216.photobucket.com/albums/cc178/1fstws6/100_1661p.jpg http://i216.photobucket.com/albums/cc178/1fstws6/100_1659p.jpg

It will handle the weight no problem. The only thing that makes it tough is this trailer has low sides on it and a fold down ramp gate. With that said I have hauled a 79 trans am,56 chevy pro street ,both big cars. I had to get out thru the window because the door would not open all the way. I made it work. I also used 2x6x8 boards to get the cars on. I have pics on the way as soon as my battery gets charged back up.

I'm selling a used 6x16 tandem axle trailer with a fold down gate, good tires and lights that work. It does need a couple of boards replaced on the floor no big deal though it is still being used right now the way it is with no problems. This trailer has hauled small cars and bobcats with no problems. I will be getting a different trailer this weekend so I will no longer need this one. $400.00

Did you relist it ?

Sold

It might be sold. Will know next week and I will keep in touch.

The pool table is in Dublin at my parents house and have not been able to take a picture of it yet but I found someone selling the identical table but for twice as much, LOL!!! Check it out here: http://detroit.craigslist.org/spo/627403806.html

4.3 runs like new. I have towed my tandam axle 6x 16 trailer with 3 commercial mowers with this a couple of times and did just fine.

I'm selling this nice Brunswick Tournament model table for my Mom. It is the 130th anniversary model . Selling for 700.00 I believe this is at least a 1500.00 new table. No pics at this time. Located in Dublin.

LOL.still have it. I cant remember even what price we agreed on last. Its been one dam rough last few years. My memory and brain is just fried. The truck was my Dads and I'm selling it for my Mom. PM me sometime.

I thought this would be the best place for the post. If it is not ok here I can move it to the for sale area. Just noticed it got moved. No problem,Thanks.

This would be a good opportunity for someone who wants to make some money on the side or start up their own lawn/landscape business. I have a 1993 Chevy 1/2 ton with a fold down gate and a 48 inch commercial mower. The mower and the truck need nothing, they are ready to work. The truck has 123,000 gently miles, never beat on. It has a new radiator, water pump, starter and tires. The body of the truck is extra clean. The truck comes with tool box and bed liner and the original tail gate that is excellent condition. The mower has a new 12.5 Kawasaki engine with new tires and belts. $4000 for entire setup. http://i216.photobucket.com/albums/cc178/1fstws6/100_1763.jpg http://i216.photobucket.com/albums/cc178/1fstws6/100_1764.jpg http://i216.photobucket.com/albums/cc178/1fstws6/100_1767.jpg http://i216.photobucket.com/albums/cc178/1fstws6/100_1766.jpg http://i216.photobucket.com/albums/cc178/1fstws6/100_1761.jpg http://i216.photobucket.com/albums/cc178/1fstws6/100_1760.jpg http://i216.photobucket.com/albums/cc178/1fstws6/buntonmower2.jpg http://i216.photobucket.com/albums/cc178/1fstws6/buntonmower3.jpg

LOL, Harbor Freight is right. So is it worth 40 bucks.