![](https://ohmo.co/uploads/set_resources_9/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
aussiek2000
-
Posts
515 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Store
Events
Posts posted by aussiek2000
-
-
they show out of stock
-
Need to get a pair of drag radials next week. Anywhere in the columbus area stock 275/40-17 ET streets? I can go to summit if I have too, but columbus is closer.
-
It will be a while - this thing is violent as is with the 6M and 4.10 gears. The rear is a bit whiny so I will probably have to have the rear redone.
check what bushings are in it. if it has stiff poly or delrin, they tend to be loud. Rubber or some of the softer poly will quiet things down.
-
Hit up NHRATA on here when you really want to gain some HP. He picked up quite a few CFM on my heads.
-
I bet it does. My "small cam" G8 turns heads like crazy when its sitting there loping.
-
Buddy live in the Canton area. We will probably take both cars to quaker city in a couple weeks
-
A set of BTR springs should have no problem going 30k+
-
They won't be doing the no prep again, when the track is prepped it will definitely hook. Car sounded good by the way!
Thank you. should have said something. I didn't know anyone else that was there.
Tried a few different launch techniques and the track wouldn't hold any power. That turbo 3rd gen about at the wall.
-
nice car. Have Brian see if he can pick up a little more power. should do more than 460
-
You will need some decent track prep to run that # with those tires. Good luck!! Keep us posted.
You were right. Went to pacemaker tonight. It was no prep "street heat" night. Car wouldn't hook no matter what I tried. Best pass was a 8.5 @ 85 with 2.0 60ft
will be ordering some hoosiers next pay day.
-
Cops did their job. They retreated much further than i would have expected. I wonder if they were leery to drop the bad guy due to what media would say?
-
Do you have power and ground at vent valve plug. Should ground when commanded on
-
Awesome. I have owned a cammed car before but it was a baby cam. This cam makes the car sound totally pissed off. I love the sound but don't want to lose all drive ability on the street. The 4.10s should help I would think.
My car has a 224/236 .631/.621 122+4 with ported LS3 heads and 3600 stall. Drive it every day, not much different than non-cammed car once we got tune dialed in and turned off TCC in town.
-
If you can get the light to stay on, call any ford dealer and see if they can at least pull codes and make an RO and note it. That way when you do have it in for service, there are t least codes to start with.
So many times I've had people wait to bring their car in and the codes clear based on key/drive cycles. Makes it very hard to try and find the issue.
-
1 minute. that didnt last long
-
Ran down to woodbury after work. got some win 296 and some primers.
-
Have you called or tried Buckeye Outdoors in Hebron or Ohio Valley Outdoors in Lancaster? I was at Fin Feather Fur in Ashland a week or so ago and the had a good selection of powders. I would call first though. Good Luck
Buckeye outdoors hasn't had very much pistol variety last few times I've been there.
Might run down to woodbury outfitters after work tomorrow.
Figured I'd see if anyone had any they were looking to sell versus wasting time and gas for nothing
-
Saw it today. Nothing to phone home about. But the Flaming Guitar player was pretty awesome.
-
Looking for a pound of one the following powders if anyone has some.
Alliant Blue dot
Hodgdon h108 or h110
Hodgdon lil gun
Hodgdon Clays
Alliant Unique
Winchester 296
Accurate No.7 or No.9
-
Pulled this out of 13 equinox, unknown service history
http://i140.photobucket.com/albums/r39/aussiek2000/2C67C760-2659-4C3E-B90F-BB3509008CD7.jpg
-
-
Does it indicate which cylinder is missing or just a random code?
-
wow......
I'm honestly chuckling maniacally in my cube for some reason..... 950 hp is a whole lot to be short.
I bet it was able to put down what it did make better than a hellcat tho.
Hellcat did 658 on Smokey's superflow last weekend.
-
Futral Motorsports spec'd me a Cam Motion 224/236 .631/.621 112+4 LSA. I run a 3600rpm FTI stall on stock gear and drive in town mon-fri and its not different than any other car
The fun did not last long...oil pump took a crap
in Passing Lane
Posted