AJ

looks like he tried to help http://www.columbusracing.com/forums/showpost.php?p=797255&postcount=23

on a side note paul understands everything you just typed and thinks there is nothing wrong with what you just said.:bangbang:

you paid money for lowering bolts? you can get the car so low on stock bolts and cutting one rib off the bushing that you scrape almost everything, dead animals, bumps on the freeway, you name it. HPfiend got one a few months ago and my car side by side his is almost 4" lower. good call on the intake, i love mine. the headslamps need HID's though, they suck. there is a kit on corvetteforum for under $300 and they are awesome. good call on the car, your going to love it.

ben, http://www.youtube.com/watch?v=RHgjFPhhzY8&feature=related

see the end of page 9, same as 5-9

or it could push the stud into the hub and make it spin free and you'll really have a hard time then.

this also works well if you can get in behind the wheel to pry on something with enough force. that could take awile if he has junk bits.

i see now, jam something under the nut like a pry bar to get some leverage on the nut with and try and take the nut off with the pressure of the pry bay.

you can tighten it? whats the worst that can happen, get as tight as you can to try and brake it.

cut it, its stripped in such a way that its bect cut off. the school to work kids that work for me have done this a few times and it takes me forever sometimes to get them off.

oh also you could use the Paint Shop paint you can pick up at Advanced, auto zone or jegs.

you can also use Dupont PD90LF epoxy sealer. comes in gray or black. thats what my camaro was done in when i took it to bare metal.

nevermind

craigslist m4m come over to my house or job and have your way with me :bangbang:

see what i mean.....

apperently your the more stupid of the two as your come backs are short are uber weak:rolleyes:

so what i am getting from this is they are your cars because you have them? so would this be like the bank and my truck, its my truck but the bank owns it? so they are your cars but your unkle owns them? your dad(s) should have pulled out.

you guys are going to have to wait till 3 when they get off the bus from school for them to post more.

deaf mute nympho-maniac

i fail, i guess i should have looked harder.

i never go there my self but still more bad news to start the week off with http://www.foxbusiness.com/story/markets/industries/retail/circuit-city-files-chapt--bankruptcy/

i'm sure there will be some awesome deals soon. http://www.foxbusiness.com/story/markets/industries/retail/circuit-city-files-chapt--bankruptcy/

doesn't take you long to look at it when its hot.

most people don't have the tools we do so the heat and cool doesn't work.

soke it in PB blaster for a few hours. the metal spacer in the bushing has rusted to the bolt, beating it with a hammer is about the only way your going to get it since heat won't be able to reach all the way through.