coltboostin

Still waiting for a responce to my PM's. I see that you guys have been on (and are on right now) so why no reponse? In the words of your brother powers..

skerd?

I would say the reason you have gotten so much shit is people are getting tired of seeing you post the same stuff over and over and over. Yes you have a hard-on for IPS we all know that. If you wanted to finalize the bet you should have done it in PM's and if they didn't respond you could have called them.

Once you guys had everything worked and and agreed upon they post up the details for everyone to talk about what have you.

 

As for banning you I don't see a reason for it you talk shit and there's nothing wrong with that.

They finally started responding to PM's so I am trying to get them to finalize it.

This could be the last time I post the same stuff over, and over, and over again as you say. They are being given the opportunity to shut me the fuck up. They just need to sign on the dotted line and take it.

The best part in all of this mess is that people speak of the drama I bring. The drama is caused by the countless posts of off-topic shit made against me, simply because I am coltboostin, all of which come from people that 100% have not had any personal contact with me. I don’t invite it, I never asked for it-yet no matter how non-confrontational the thread is, like this one I made just to clarify the terms of the bet.

http://www.columbusracing.com/forums/showthread.php?t=26726&page=2

In this post, I made not one confrontational statement, and did not dog, call out, ect anyone. Yet, it is immediately filled by stupid posts by your fellow CR brethren. There is no need for this shit-and if I am going to be blamed for dumb people’s posts I can control, than I don’t even care to be here. Its ridiculous how stupid this has gotten.

Beefcake, since you started this thread, and you have some issue with me, why don’t you take off the skirt and send me a PM if you really have a problem with me? I would be glad to talk in person.

you don't need to keep posting this bet on the forum.

 

http://www.ipsmotorsports.net/

 

you know their website i'm sure just call them and spare us the fucking drama.

There would be no drama at all if the CR public would just let it be. Let IPS respond, and leave it at that. That's a simple concept you would think right?

Also, making it the bet puclic makes it accountable. How hard would it be for IPS to back out, or renig on a bet made in private between them and I? In turn, how would they be able to now that its public?

I race, and you are still gay.

You have not met, or had any personal conversation with me now have you?

They have. We will see what they say.

You're a huge Douchebag.

And you continue to make educated posts.

But, you being a moron is somehow my fault, correct?

Also, to all the sad fucks that wank off to CR at night conjuring up more posts of useless crap backed by not one stinking fact (that in the end I will some how get the blame for)-have you met me? Have you spoke to me? Ask the people that have about me before you attempt to draw an opinion. Or, if your pussy is sore, PM me, and I will gladly send you my # so you can talk to me in person. I know many of you keyboard warriors may not be comfortable with that-since you will be out from behind the safety of the monitor-where the world will be able to tell what a weak, sorry person you may be-that kid in high school that wished he fuck my girlfriends, the one that hated the jocks, and still has it out for the “popular guy”.

I invite John T, Sam, Linn, Anthony, and the other virtual god fathers of the site to post about me, their honest opinions. They are the ones that race, they are the opinions I give 2 shits about. The rest of you idiots that are cluttering up the forums can continue to sit back and masturbate to our videos, times, and achievements per the usual.

What the fuck is the problem here?

I offered a gentleman’s bet. IPS countered, we modified it, and now have an agreed bet. I made one more post to clarify it, so that neither party can backpedal out of it later.

That’s it. Its not a hard fucking concept. Now why would you try and say (with this thread) that all the backlash of absurdly stupid, uneducated, dumb, ignorant, thoughtless and 99% of the time meaningless and unrelated to the topic responses posted by CR members-is some how my fault? Fuck that, and fuck you for implying it. You can PM me your phone number, and I will tell you the same.

You can show up when I am in C-bus, and I will tell it to your face. This is such a weak crock of shit its amazing you can come up with it sober in any way. If this is how it is, if I am labeled as a trouble maker for setting up a fun challenge, and then being riddled with 140posts of useless bullshit by YOUR core members-then you can go fuck yourself.

And if your going to continue to be a pussy and ban me for this, then that’s a sad way for IPS to get out of a bet that not only did they agree to, but suggested in the first place!

All I want is IPS to say OK to the terms, and have it made a sticky so no one can question the outcome come Nov. 1. Evidently, that is to hard of a task for 95% or CR to comprehend.

5k was for everything-but the IC and turbo set up are already gone.

2200 is for the long block WITH cams, and yes, many iqueries, but no money in hand as of yet.

Nice bike.

When is the turbo going on it?

There is a local with a chip and a pipe. It moves pretty good.

who wants to buy a beat to piss, on the ragged edge motor? good luck on the sell im sure someone will buy it due to the numbers

Ragged edge? I made 700whp@32psi and 11.2 AFR's. If thats the ragged edge, I am in the wrong business!

Who didn't see this comming?

You didnt expect me to just throw it in another shell?

No lol.

but that would make my life real easy.

Typo- and a few more peices.

Both the inlet and outlet of the intercooler are 3inch

91-94 AWD 5 speed ECU-EPROM, socketed, new caps, cleaned board.-240$ shipped

Is the engine bay the same size as a 1g? As in, is your FMIC setup custom to your tiny car?

I sold my old front mount to a kid with a 1g and it bolted right up. A 1g has more romm up fornt than I do, but the pipe lenghts should be dead on with no modification. I think the core would fit up front as well with no problems.

Due to a lack of finances and some personal issues, I will be getting out of the car scene for a while. Since bills need to get paid, I need to make some money. What better way than to sacrifice the legend itself…

The Colt being destroyed way beyond repair-Everything that was salvageable is up for grabs. 10.5@148mph @ 30psi.

Full Turn Key motor-2200$

Made 708whp and 508 ft lbs without an issue to the car’s death. Aprox 6500miles on it.

Well Ported head-comparable to mainstream “Stage 3” port jobs- new guides/seats

Milled and O-ringed

Stock springs with “special sause” shims and Titanium retainers-tested to daily 9k shifting

2.0 block

Polished crank, newer oil pump cover

No balance shafts

Eagle Rods-Wiesco pistons-.20 over with full floating wrist pins

The car is in no condition to do a compression test, so all I can say is that the car ran great, pulled hard, did not smoke, and only had any sign on blowby with boost above 32psi (which is normal). This set up would cost you $4000+ . I will include factory turbo cams, or you can by the Comp cams I have for only 200$ more! Local pick up preferred, but can deliver short distance.

Comp 101200 cams. Perfect condition-Made 708/508@33psi.-$360 shipped

SMP Top Mount GT42 FULL Set up.-2200$

Shearerfabrications.com top mount, hands down the best on the market. Twin entry T4, with twin 38mm Gates. Saw full boost @6300rpm

GT42 non-BB turbo-Absolutely NO shaft play

Full v-band 4inch Down pipe to 3.5 inch exhaust (at firewall)-2 O2 bungs

Gates dumped into the exhaust

All parts have 6500miles on them

Will include oil feed and drain

This all retails for over $3500 purchased separately

13.5x3.5x24inch core FMIC-J-spec Tail BOV welded onto the cold side tank with pipes-$600 Set up for GM Mas action-Custom tanks tapered to fit the massive core. Piping is a mix of aluminum and mild steel-2.5 from turbo and 3inch out.

93 FWD Talon trans, with LSD insert. Tested to 9k, no grids, never missed a shift. Never one wheel peel again

$400

Package Deal-

I will sell EVERYTHING listed- for $5000. That’s a savings of 600$-Plop it in Mom’s Colt and have the biggest e-penis in the land. You can recoup the money racing Hyabusas by the end of summer.

I will let the long block and Turbo set up go for 4200$. With cams. A savings of $400

Not obo, not yet.

Email me at tercelturbo@hotmail.com with questions

Pics

http://thelotspot.com/images/jp/Colt06/DSC00154-1.JPG

http://thelotspot.com/images/jp/Colt06/DSC00158-1.JPG

http://thelotspot.com/images/jp/Colt06/DSC00161-1.JPG

http://thelotspot.com/images/jp/Colt06/DSC00162-1.JPG

http://thelotspot.com/images/jp/action/before/DSC00186.JPG

http://thelotspot.com/images/jp/action/before/DSC00179.JPG

How it ran @ 30psi

http://videos.streetfire.net/video/e3da15e9-fc26-408c-a714-ad318845ffb1.htm

I am just sorry I never got to turn up the wick. Do it for me.

Even if the car was ready to run by the time I presented, you still would not of ran me. Also said by Jamie that he didnt want you to push the car till you raced Tilley. So I dont think it is weaksauce on my part at all, just unfortunate that we were not able to run before your accident...

I agree, and applaud the fact that you were willing to venture past the iron borders of 270.

What makes you think that you would of beat me, and yes but it will fixed by this weekend.

This weekend is more than 2 weeks too late. -weaksause-

Uh......

http://www.columbusracing.com/forums/showthread.php?t=25256

 

I was willing to meet him halfway....

Why race the scout team? It woul dhave been a loose-loose situation for me, even when I did win.

And, arent you STILL haveing issues with you car?

not so ther eis a mustang here that runs 10's that would have liked a go at him do your homework

 

and no its not mine

Like these?

http://thelotspot.com/videos/Summer06/Digracemustangs.WMV

Or this one

http://thelotspot.com/videos/Summer06/JpVsGeorge.WMV

Or these guys

http://thelotspot.com/videos/Summer06/akron.wmv

700+whp 10sec or better stangs are like belly buttons in the A-K, and thats not even counting the "Cleveland Stangs".

So why hasn't anyone in Columbus ever seen the Colt?

 

He has ran his mouth for at least a year, has been called out more times than I can count and no one in Columbus has ever seen this pile of shit.

 

No one would even give a fuck about him or his pile of shit had he not been running his mouth - yet a year or more later we only have a Colt into a wall and no results.

 

So what is it you're failing to mention? What is it that brought this pile of shit Colt that hit a fucking wall into a thread that has NOTHING to do with it?

 

What am I missing?

Not only have many from Columbus seen my car, some have raced it. Hell, I have ene been racing in Cinci fro crying out loud. The only reason D-day didnt happen is because the other party was not ready. Simple as that.

No results? Is this serious?

Are you serious?

And still no one knows this mystery machine you owned in a previous life of some sort that would have walked me, and what you imagine it may have run. Please, you have been quite consistent on providing a good laugh. I have a feeling this will be the joke of the month.

.

 

On top of that, we ALL know you're scared to show your face in Columbus..

Bahhaha!! Yup, all 148mph of me was shakin in my boots, I swear!

You just made me lol.